Canadian Brewer Spectrometer Network

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== All The Fuses! ======
The brewer spectrometer has a ton of fuses used for differently applications. This is what fuses ECCC uses and for where. (Not this may differ from what is shipped from the manufacture)

===== Tracker =====
{{:pictures:20230208_120835.jpg?400|Tracker controller board}}\\
Inside the tracker has a 5A slow blow inline fuse for all the power including the tracker electronics and brewer
===== Brewer - Old Electronics =====
==== Environmental Control Board (ECB) ====
{{:pictures:20230208_135125.jpg?400|}}
=== Inside brewer ===
 
==== Brewer - New Electronics ====
Heater uses a 5A FB fuse
Brewer uses a 2A SB fuse

==== List of Fuses used ====
  * 5A SB (Tracker main fuse)
  * 4A SB (ECB in-line)
  * 2A FB (Tracker Heater in-line)
  * 2x 5A FB (mini - ECB and tracker board)
  * 4x 250mA FB (mini - ECB and tracker board)
  * 2x 100mA FB (mini - ECB and tracker board)
  * 500mA FB (mini - ECB)
  * 5A FB (mini Brewer SB Electronics)
  * 2A SB (mini Brewer SB Electronics)



=== ECCC Fusebox kit layout ===
|100ma FB(M)|250ma FB(M)|2A FB(M)|5A FB(M)|5A FB(M)|
|100ma FB(M)|250ma FB(M)|2A FB(M)|2A FB|2A FB|
|250ma FB(M)|500mA FB(M)|2A SB(M)|4A FB|4A FB|
|250ma FB(M)|500mA FB(M)|2A SB(M)|5A SB|5A SB|

(M) = Mini fuses