====== Digital Voltage Meter ======

These Digital voltage meters (DVM) are used for the UV lamp calibration system to control and insure the current stays at 8A by changing the voltage. 

====== Calibration and location Record ======

^Serial Number^Asset Tag^Calibration Due Date^Location^
|US34000577|J03995|January 12, 2020|To be sent for Calibration|
|MY42002260|J81369|March 4, 2021|Spare - To be calibrated next|
|US36000699|n/a|March 9, 2021|To be sent for calibration|
|US36001261|  |March 3, 2021|?|
|US36001852|???|October 27, 2024|UV Cal room|
|US36001881| |Oct 27, 2023|Remote 5|
|US36001878| |Oct 27, 2023|Remote 4|


====== Setting dvm to RS232 mode ======
Because everytime it gets sent out the calibration, they don't set it back!!\\
Enter menu via <key>shift</key>+<key>< </key>\\
Use the <key>> </key> to get to F: I/O menu and press  to enter it\\
Press <key>> </key> once to get to interface and press <key>v</key> again\\
Press <key>> </key> to get to RS-232, press 
<key>auto/man</key>to save.

The dvm will not be in RS232 mode.