Differences

This shows you the differences between two versions of the page.

--- hvb [2023/10/11 12:57] – added the negatives in to the suggested values and picture of the sps reno
+++ hvb [2023/11/30 13:25] (current) – Depreciated reno
@@ Line 1: / Line 1: @@
-===== HVB =====
+===== HVB (Depreciated)=====
+NOTE: As of version 7.33, HVB has been depreciated. [[hv|HV]] will be used for both multiboard & single board electronics.
 === High Voltage Test (MB) ===
 The HVB command  is a modification of the HV command and should only be used on the multi-board electronics. The multi-board electronics is incapable of automatically performing this test meaning manual adjustments are required during the high voltage test. The HVB modification allows the technician to use the UP sighting BUTTON to indicate that the manual adjustment has been made and to continue the test.  If the [[hv|HV]] command is used with the multi-board electronics the technician must walk back to the terminal to press enter to continue the test.\\