| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
| ds: | DS intensity too high ( 202234/cy) quitting. | 1 | 99 | B22520.029 | ALERT | #029 | 17:49:52 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B22520.029 | ALERT | #029 | 20:07:56 | | 1 | -1 |
| rl: | 2020 224 04 30 04 Reset Warm -> Tepid from 2020 224 04 29 58 until 2020 224 04 29 59 . Counts: 1,0 | 1 | 3 | B22520.194 | ALERT | #194 | 04:29:12 | | 1 | -1 |
| ds: | DS intensity too low ( 2/cy), skipping. | 2 | 99 | B22520.145 | CARE | #145 | 10:13:57 | | 1 | -1 |
| zs: | ZS intensity too low ( 156/cy), skipping. | 3 | 99 | B22520.145 | CARE | #145 | 10:14:12 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 1 | 10 | B22520.145 | CARE | #145 | 17:20:19 | | 1 | -1 |
| ds: | DS intensity too high ( 305453/cy) quitting. | 2 | 99 | B22520.145 | CARE | #145 | 21:10:13 | | 1 | -1 |
| re: | Azimuth discrepancy = -114 | 1 | 99 | B22520.187 | CARE | #187 | 05:38:46 | -114 | -30 | 30 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 4 | 10 | B22520.187 | CARE | #187 | 17:05:54 | | 1 | -1 |
| ds: | DS intensity too high ( 522956/cy) quitting. | 1 | 99 | B22520.187 | CARE | #187 | 20:43:42 | | 1 | -1 |
| ds: | DS intensity too low ( 126/cy), skipping. | 2 | 99 | B22520.187 | CARE | #187 | 23:37:51 | | 1 | -1 |
| rl: | 2020 224 05 37 07 Reset Warm -> Tepid from 2020 224 05 37 01 until 2020 224 05 37 02 . Counts: 1,0 | 1 | 3 | B22520.191 | CARE | #191 | 05:31:23 | | 1 | -1 |
| rl: | 2020 225 07 32 45 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.021847 Volts. | 4 | 3 | B22520.191 | CARE | #191 | 05:32:05 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 1 | 10 | B22520.191 | CARE | #191 | 17:12:56 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B22520.191 | CARE | #191 | 20:35:21 | | 1 | -1 |
| ds: | DS intensity too high ( 335599/cy) quitting. | 3 | 99 | B22520.191 | CARE | #191 | 20:54:02 | | 1 | -1 |
| rl: | 2020 224 06 37 47 Reset Warm -> Tepid from 2020 224 06 37 41 until 2020 224 06 37 41 . Counts: 1,0 | 1 | 3 | B22520.203 | CHURC | #203 | 06:34:36 | | 1 | -1 |
| rl: | 2020 224 06 48 56 New value set for watermark SUPPLY.VOLTAGE.HIGH[-12V]: -10.998001 Volts. | 2 | 3 | B22520.203 | CHURC | #203 | 06:34:39 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B22520.203 | CHURC | #203 | 15:30:25 | | 1 | -1 |
| rl: | 2020 224 06 26 42 Reset Warm -> Tepid from 2020 224 06 26 36 until 2020 224 06 26 37 . Counts: 1,0 | 1 | 3 | B22520.239 | CHURC | #239 | 06:24:58 | | 1 | -1 |
| rl: | 2020 224 06 26 43 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B22520.239 | CHURC | #239 | 06:24:59 | | 1 | -1 |
| rl: | 2020 224 06 43 25 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 2 | 3 | B22520.239 | CHURC | #239 | 06:25:01 | | 1 | -1 |
| rl: | 2020 224 06 43 25 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 2 | 3 | B22520.239 | CHURC | #239 | 06:25:01 | | 1 | -1 |
| fz: | Suppressed oscillation of filter wheel. | 2 | 5 | B22520.239 | CHURC | #239 | 11:36:18 | | 1 | -1 |
| ds: | DS intensity too high ( 213470/cy) quitting. | 2 | 99 | B22520.069 | EUREK | #069 | 19:06:26 | | 1 | -1 |
| rl: | 2020 224 06 05 04 Reset Warm -> Tepid from 2020 224 06 04 58 until 2020 224 06 04 59 . Counts: 1,0 | 1 | 3 | B22520.192 | EUREK | #192 | 06:02:45 | | 1 | -1 |
| ds: | DS intensity too high ( 208721/cy) quitting. | 3 | 99 | B22520.192 | EUREK | #192 | 13:50:10 | | 1 | -1 |
| rl: | 2020 224 06 06 41 Reset Warm -> Tepid from 2020 224 06 06 35 until 2020 224 06 06 36 . Counts: 1,0 | 1 | 3 | B22520.223 | EUREK | #223 | 06:04:11 | | 1 | -1 |
| rl: | 2020 224 06 26 22 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 3 | 3 | B22520.223 | EUREK | #223 | 06:04:18 | | 1 | -1 |
| rl: | 2020 224 06 26 22 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 3 | 3 | B22520.223 | EUREK | #223 | 06:04:18 | | 1 | -1 |
| rl: | 2020 225 08 40 14 New value set for watermark LOOP.RUN.TIME: 715.000010 millisec. | 2 | 3 | B22520.223 | EUREK | #223 | 06:04:25 | | 1 | -1 |
| rl: | 2020 225 08 40 14 New value set for watermark LOOP.RUN.TIME: 715.000010 millisec. | 2 | 3 | B22520.223 | EUREK | #223 | 06:04:25 | | 1 | -1 |
| cfg_out: | Illegal command (cfg | 1 | 99 | B22520.223 | EUREK | #223 | 06:04:35 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B22520.223 | EUREK | #223 | 14:40:34 | | 1 | -1 |
| re: | Azimuth discrepancy = -33 | 1 | 99 | B22520.018 | GOOSE | #018 | 04:22:34 | -33 | -30 | 30 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B22520.018 | GOOSE | #018 | 17:04:27 | | 1 | -1 |
| rl: | 2020 224 04 21 32 Reset Warm -> Tepid from 2020 224 04 21 26 until 2020 224 04 21 27 . Counts: 1,0 | 1 | 3 | B22520.204 | GOOSE | #204 | 04:19:01 | | 1 | -1 |
| ds: | DS intensity too high ( 413973/cy) quitting. | 2 | 99 | B22520.204 | GOOSE | #204 | 17:15:02 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B22520.204 | GOOSE | #204 | 18:18:51 | | 1 | -1 |
| ds: | DS intensity too high ( 213601/cy) quitting. | 2 | 99 | B22520.009 | MAUNA | #009 | 22:38:30 | | 1 | -1 |
| ua: | HOME key pressed | 1 | 99 | B22520.009 | MAUNA | #009 | 23:02:08 | | 1 | -1 |
| ua: | Going to menu | 1 | 99 | B22520.009 | MAUNA | #009 | 23:02:25 | | 1 | -1 |
| re: | Zenith discrepancy = -2128 | 1 | 99 | B22520.009 | MAUNA | #009 | 23:04:45 | -2128 | -10 | 10 |
| re: | Azimuth discrepancy = -11445 | 1 | 99 | B22520.009 | MAUNA | #009 | 23:06:12 | -11445 | -30 | 30 |
| c: | Illegal command ( c) in schedule , ignoring | 1 | 99 | B22520.119 | MAUNA | #119 | 19:28:18 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B22520.119 | MAUNA | #119 | 19:45:50 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B22520.119 | MAUNA | #119 | 19:46:49 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B22520.119 | MAUNA | #119 | 22:38:34 | | 1 | -1 |
| ds: | DS intensity too high ( 288943/cy) quitting. | 2 | 99 | B22520.119 | MAUNA | #119 | 22:39:13 | | 1 | -1 |
| ab_sk: | HOME key pressed | 1 | 99 | B22520.031 | RESOL | #031 | 14:25:16 | | 1 | -1 |
| rl: | 2020 224 06 42 45 Reset Warm -> Tepid from 2020 224 06 42 39 until 2020 224 06 42 40 . Counts: 1,0 | 1 | 3 | B22520.235 | RESOL | #235 | 06:36:43 | | 1 | -1 |
| rl: | 2020 225 08 18 47 New value set for watermark LOOP.RUN.TIME: 700.999975 millisec. | 2 | 3 | B22520.235 | RESOL | #235 | 06:36:57 | | 1 | -1 |
| rl: | 2020 225 08 18 47 New value set for watermark LOOP.RUN.TIME: 700.999975 millisec. | 2 | 3 | B22520.235 | RESOL | #235 | 06:36:57 | | 1 | -1 |
| ds: | DS intensity too high ( 290983/cy) quitting. | 1 | 99 | B22520.012 | SATUR | #012 | 17:33:29 | | 1 | -1 |
| rl: | 2020 224 08 30 19 Reset Warm -> Tepid from 2020 224 08 30 14 until 2020 224 08 30 14 . Counts: 1,0 | 1 | 3 | B22520.206 | SATUR | #206 | 08:31:25 | | 1 | -1 |
| zs: | ZS intensity too low ( 212/cy), skipping. | 2 | 99 | B22520.206 | SATUR | #206 | 13:10:02 | | 1 | -1 |
| ds: | DS intensity too high ( 239807/cy) quitting. | 3 | 99 | B22520.206 | SATUR | #206 | 17:33:18 | | 1 | -1 |
| ab_sk: | HOME key pressed | 1 | 99 | B22520.055 | STONY | #055 | 09:46:51 | | 1 | -1 |
| fr: | Micrometer #1 reference found at step-1102 (+CAL)=-164 Now set to o3 offset = 2483 | 1 | 99 | B22520.055 | STONY | #055 | 09:48:42 | (+CAL)=-164 | 1000 | 9000 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B22520.055 | STONY | #055 | 15:07:43 | | 1 | -1 |
| ds: | DS intensity too high ( 237290/cy) quitting. | 4 | 99 | B22520.055 | STONY | #055 | 18:47:06 | | 1 | -1 |
| re: | Azimuth discrepancy = 33 | 1 | 99 | B22520.008 | TORON | #008 | 05:26:06 | 33 | -30 | 30 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 1 | 10 | B22520.008 | TORON | #008 | 16:55:17 | | 1 | -1 |
| re: | Azimuth discrepancy = -158 | 1 | 99 | B22520.015 | TORON | #015 | 05:29:40 | -158 | -30 | 30 |
| ds: | DS intensity too low ( 1/cy), skipping. | 2 | 99 | B22520.015 | TORON | #015 | 10:36:12 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 2 | 10 | B22520.015 | TORON | #015 | 17:21:33 | | 1 | -1 |
| zs: | HOME key pressed | 1 | 99 | B22520.015 | TORON | #015 | 18:07:02 | | 1 | -1 |
| zs: | ZS measurement terminated | 1 | 5 | B22520.015 | TORON | #015 | 18:07:03 | | 1 | -1 |
| zs: | Going to menu | 1 | 99 | B22520.015 | TORON | #015 | 18:07:04 | | 1 | -1 |
| re: | Zenith discrepancy = 46 | 1 | 99 | B22520.039 | TORON | #039 | 05:33:47 | 46 | -10 | 10 |
| dp: | Doing dispersion with internal HG. | 1 | 99 | B22520.039 | TORON | #039 | 07:31:26 | | 1 | -1 |
| rl: | 2020 224 05 37 37 Reset Warm -> Tepid from 2020 224 05 37 31 until 2020 224 05 37 32 . Counts: 1,0 | 1 | 3 | B22520.190 | TORON | #190 | 05:32:37 | | 1 | -1 |
| re: | Azimuth discrepancy = 44 | 1 | 99 | B22520.190 | TORON | #190 | 05:40:11 | 44 | -30 | 30 |
| ds: | DS intensity too low ( 4/cy), skipping. | 3 | 99 | B22520.190 | TORON | #190 | 10:19:52 | | 1 | -1 |
| zs: | ZS intensity too low ( 74/cy), skipping. | 3 | 99 | B22520.190 | TORON | #190 | 10:20:06 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B22520.195 | TORON | #195 | 05:39:06 | | 1 | -1 |
| ds: | DS intensity too low ( 2/cy), skipping. | 3 | 99 | B22520.195 | TORON | #195 | 10:20:28 | | 1 | -1 |
| zs: | ZS intensity too low ( 117/cy), skipping. | 3 | 99 | B22520.195 | TORON | #195 | 10:20:43 | | 1 | -1 |
| rl: | 2020 224 05 36 32 Reset Warm -> Tepid from 2020 224 05 36 26 until 2020 224 05 36 27 . Counts: 1,0 | 1 | 3 | B22520.246 | TORON | #246 | 05:29:51 | | 1 | -1 |
| dp: | Doing dispersion with internal HG. | 1 | 99 | B22520.246 | TORON | #246 | 08:24:22 | | 1 | -1 |
| sc: | Suppressed oscillation of filter wheel. | 2 | 5 | B22520.246 | TORON | #246 | 12:14:16 | | 1 | -1 |