| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| ds: | HOME key pressed | 1 | 99 | B21020.019 | ALERT | #019 | 02:04:19 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B21020.019 | ALERT | #019 | 02:05:04 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B21020.029 | ALERT | #029 | 02:22:25 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B21020.029 | ALERT | #029 | 02:22:29 | | 1 | -1 |
| ds: | DS intensity too high ( 210010/cy) quitting. | 1 | 99 | B21020.029 | ALERT | #029 | 23:38:35 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B21020.194 | ALERT | #194 | 02:07:05 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B21020.194 | ALERT | #194 | 02:07:09 | | 1 | -1 |
| rl: | 2020 209 04 34 16 Reset Warm -> Tepid from 2020 209 04 34 10 until 2020 209 04 34 11 . Counts: 1,0 | 1 | 3 | B21020.194 | ALERT | #194 | 04:27:00 | | 1 | -1 |
| sr: | Azimuth Steps per revolution measured = 14595 | 1 | 99 | B21020.194 | ALERT | #194 | 05:24:13 | 14595 | 14600 | 14750 |
| sr: | Updating SR constant from 14594 to 14595 | 1 | 99 | B21020.194 | ALERT | #194 | 05:24:14 | 14595 | 14600 | 14800 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B21020.194 | ALERT | #194 | 14:09:39 | | 1 | -1 |
| ds: | DS intensity too high ( 220678/cy) quitting. | 1 | 99 | B21020.194 | ALERT | #194 | 14:27:03 | | 1 | -1 |
| az: | Azimuth discrepancy = -2573 | 1 | 99 | B21020.021 | AMUND | #021 | 00:00:50 | -2573 | -30 | 30 |
| sl: | Will do AZ for SPO | 1 | 99 | B21020.021 | AMUND | #021 | 14:54:30 | SPO | 1 | -1 |
| skc: | Going to menu | 1 | 99 | B21020.021 | AMUND | #021 | 23:59:41 | | 1 | -1 |
| zs: | ZS intensity too low ( 108/cy), skipping. | 2 | 99 | B21020.145 | CARE | #145 | 00:57:01 | | 1 | -1 |
| re: | Zenith discrepancy = -884 | 1 | 99 | B21020.145 | CARE | #145 | 14:24:01 | -884 | -10 | 10 |
| re: | Azimuth discrepancy = -11315 | 1 | 99 | B21020.145 | CARE | #145 | 14:25:28 | -11315 | -30 | 30 |
| ux: | UV extended scan aborted | 1 | 3 | B21020.145 | CARE | #145 | 15:17:19 | | 1 | -1 |
| ux: | Going to menu | 4 | 99 | B21020.145 | CARE | #145 | 15:17:40 | | 1 | -1 |
| si: | New SI, HC = 10, NC = 64 Old = 11 , 59 | 1 | 99 | B21020.145 | CARE | #145 | 15:29:02 | | 1 | -1 |
| hg: | DEL key pressed | 1 | 99 | B21020.145 | CARE | #145 | 15:40:35 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 2 | 10 | B21020.145 | CARE | #145 | 16:58:09 | | 1 | -1 |
| ds: | DS intensity too low ( 324/cy), skipping. | 4 | 99 | B21020.145 | CARE | #145 | 19:11:41 | | 1 | -1 |
| fr: | Micrometer #1 reference found at step 8549 (+CAL)= 9567 Now set to o3 offset = 7512 | 1 | 99 | B21020.187 | CARE | #187 | 14:34:47 | 9567 | 1000 | 9000 |
| ux: | HOME key pressed | 4 | 99 | B21020.187 | CARE | #187 | 15:02:20 | | 1 | -1 |
| ux: | UV extended scan aborted | 1 | 3 | B21020.187 | CARE | #187 | 15:02:23 | | 1 | -1 |
| ux: | Going to menu | 4 | 99 | B21020.187 | CARE | #187 | 15:03:07 | | 1 | -1 |
| az: | Azimuth discrepancy = -76 | 1 | 99 | B21020.187 | CARE | #187 | 15:21:41 | -76 | -30 | 30 |
| si: | New SI, HC = 6, NC = -1380 Old = 7 , -1380 | 2 | 99 | B21020.187 | CARE | #187 | 15:29:23 | | 1 | -1 |
| hg: | DEL key pressed | 1 | 99 | B21020.187 | CARE | #187 | 15:41:47 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 4 | 10 | B21020.187 | CARE | #187 | 16:55:58 | | 1 | -1 |
| ds: | DS intensity too low ( 353/cy), skipping. | 2 | 99 | B21020.187 | CARE | #187 | 19:11:46 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 4 | 5 | B21020.187 | CARE | #187 | 19:33:49 | | 1 | -1 |
| zs: | ZS measurement terminated | 1 | 5 | B21020.187 | CARE | #187 | 21:01:09 | | 1 | -1 |
| rl: | 1992 003 15 53 09 Reset Warm -> Tepid from 2020 207 22 41 39 until 2030 332 09 22 35 . Counts: 1,0 | 1 | 3 | B21020.191 | CARE | #191 | 05:32:08 | | 1 | -1 |
| rl: | 1992 003 15 53 10 Checksum bad in low level command. | 1 | 3 | B21020.191 | CARE | #191 | 05:32:09 | | 1 | -1 |
| rl: | 1992 003 15 53 10 Motor #1: appears stuck with a reference sensor activated. | 1 | 3 | B21020.191 | CARE | #191 | 05:32:12 | | 1 | -1 |
| rl: | 1992 003 15 53 10 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B21020.191 | CARE | #191 | 05:32:14 | | 1 | -1 |
| rl: | 1992 003 15 53 11 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B21020.191 | CARE | #191 | 05:32:17 | | 1 | -1 |
| re: | Azimuth discrepancy = -1191 | 1 | 99 | B21020.191 | CARE | #191 | 14:36:49 | -1191 | -30 | 30 |
| ab_sk: | HOME key pressed | 3 | 99 | B21020.191 | CARE | #191 | 14:37:03 | | 1 | -1 |
| ds: | Going to menu | 2 | 99 | B21020.191 | CARE | #191 | 15:02:00 | | 1 | -1 |
| si: | New SI, HC = -27, NC = -465 Old = -27 , -465 | 1 | 99 | B21020.191 | CARE | #191 | 15:23:31 | | 1 | -1 |
| hg: | DEL key pressed | 1 | 99 | B21020.191 | CARE | #191 | 15:29:52 | | 1 | -1 |
| rl: | 2020 209 06 36 05 Reset Warm -> Tepid from 2020 209 06 35 59 until 2020 209 06 36 00 . Counts: 1,0 | 1 | 3 | B21020.203 | CHURC | #203 | 06:33:02 | | 1 | -1 |
| mf: | Illegal command (mf) in schedule ecsc, ignoring | 2 | 99 | B21020.203 | CHURC | #203 | 08:58:26 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B21020.203 | CHURC | #203 | 18:12:50 | | 1 | -1 |
| uv: | HOME key pressed | 1 | 99 | B21020.203 | CHURC | #203 | 23:21:43 | | 1 | -1 |
| uv: | UV extended scan aborted | 1 | 3 | B21020.203 | CHURC | #203 | 23:21:45 | | 1 | -1 |
| uv: | Going to menu | 1 | 99 | B21020.203 | CHURC | #203 | 23:22:19 | | 1 | -1 |
| sr: | Azimuth discrepancy = 102 | 1 | 99 | B21020.203 | CHURC | #203 | 23:28:56 | 102 | -30 | 30 |
| si: | New SI, HC = -13, NC = 2005 Old = -13 , 2005 | 1 | 99 | B21020.203 | CHURC | #203 | 23:33:37 | | 1 | -1 |
| rl: | Log item overwritten by later entry. | 1 | 3 | B21020.239 | CHURC | #239 | 06:27:29 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B21020.239 | CHURC | #239 | 19:29:33 | | 1 | -1 |
| ux: | HOME key pressed | 1 | 99 | B21020.239 | CHURC | #239 | 23:21:46 | | 1 | -1 |
| ux: | UV extended scan aborted | 1 | 3 | B21020.239 | CHURC | #239 | 23:21:47 | | 1 | -1 |
| ux: | Going to menu | 1 | 99 | B21020.239 | CHURC | #239 | 23:22:12 | | 1 | -1 |
| sr: | Azimuth discrepancy = -469 | 1 | 99 | B21020.239 | CHURC | #239 | 23:28:35 | -469 | -30 | 30 |
| si: | New SI, HC = 23, NC = 2025 Old = 23 , 2025 | 1 | 99 | B21020.239 | CHURC | #239 | 23:33:42 | | 1 | -1 |
| rl: | 2020 209 06 08 10 Reset Warm -> Tepid from 2020 209 06 08 04 until 2020 209 06 08 04 . Counts: 1,0 | 1 | 3 | B21020.192 | EUREK | #192 | 06:02:24 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B21020.192 | EUREK | #192 | 12:18:14 | | 1 | -1 |
| ds: | DS intensity too high ( 257943/cy) quitting. | 1 | 99 | B21020.192 | EUREK | #192 | 22:26:51 | | 1 | -1 |
| rl: | 2020 209 06 12 35 Reset Warm -> Tepid from 2020 209 06 12 29 until 2020 209 06 12 30 . Counts: 1,0 | 1 | 3 | B21020.223 | EUREK | #223 | 06:03:09 | | 1 | -1 |
| rl: | 2020 209 06 37 26 New value set for watermark LOOP.RUN.TIME: 688.000011 millisec. | 4 | 3 | B21020.223 | EUREK | #223 | 06:03:16 | | 1 | -1 |
| rl: | 2020 209 06 37 26 New value set for watermark LOOP.RUN.TIME: 688.000011 millisec. | 4 | 3 | B21020.223 | EUREK | #223 | 06:03:16 | | 1 | -1 |
| rl: | 2020 210 21 52 21 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec. | 1 | 3 | B21020.223 | EUREK | #223 | 06:03:30 | | 1 | -1 |
| rl: | 2020 210 21 52 21 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec. | 1 | 3 | B21020.223 | EUREK | #223 | 06:03:30 | | 1 | -1 |
| cfg_out: | Illegal command (cfg | 1 | 99 | B21020.223 | EUREK | #223 | 06:03:36 | | 1 | -1 |
| ds: | DS intensity too high ( 311155/cy) quitting. | 1 | 99 | B21020.018 | GOOSE | #018 | 16:06:20 | | 1 | -1 |
| rl: | 2020 209 04 20 53 Reset Warm -> Tepid from 2020 209 04 20 47 until 2020 209 04 20 48 . Counts: 1,0 | 1 | 3 | B21020.204 | GOOSE | #204 | 04:16:51 | | 1 | -1 |
| ds: | DS intensity too high ( 386573/cy) quitting. | 1 | 99 | B21020.204 | GOOSE | #204 | 15:58:06 | | 1 | -1 |
| ds: | DS intensity too low ( 232/cy), skipping. | 3 | 99 | B21020.119 | MAUNA | #119 | 16:16:37 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 1 | 10 | B21020.119 | MAUNA | #119 | 20:23:41 | | 1 | -1 |
| re: | Azimuth discrepancy = -33 | 1 | 99 | B21020.031 | RESOL | #031 | 06:32:34 | -33 | -30 | 30 |
| rl: | 2020 209 06 40 37 Reset Warm -> Tepid from 2020 209 06 40 31 until 2020 209 06 40 32 . Counts: 1,0 | 1 | 3 | B21020.205 | RESOL | #205 | 06:34:20 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 3 | 5 | B21020.205 | RESOL | #205 | 15:11:47 | | 1 | -1 |
| ds: | DS intensity too high ( 202685/cy) quitting. | 2 | 99 | B21020.205 | RESOL | #205 | 15:12:29 | | 1 | -1 |
| rl: | 2020 209 06 42 44 Reset Warm -> Tepid from 2020 209 06 42 38 until 2020 209 06 42 39 . Counts: 1,0 | 1 | 3 | B21020.235 | RESOL | #235 | 06:41:03 | | 1 | -1 |
| rl: | 2020 209 07 03 16 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 3 | 3 | B21020.235 | RESOL | #235 | 06:41:06 | | 1 | -1 |
| rl: | 2020 209 07 03 16 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 3 | 3 | B21020.235 | RESOL | #235 | 06:41:06 | | 1 | -1 |
| rl: | 2020 210 08 26 38 New value set for watermark LOOP.RUN.TIME: 718.000031 millisec. | 1 | 3 | B21020.235 | RESOL | #235 | 06:41:13 | | 1 | -1 |
| rl: | 2020 210 08 26 38 New value set for watermark LOOP.RUN.TIME: 718.000031 millisec. | 1 | 3 | B21020.235 | RESOL | #235 | 06:41:13 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B21020.235 | RESOL | #235 | 15:14:43 | | 1 | -1 |
| sr: | Azimuth discrepancy = 31 | 1 | 99 | B21020.012 | SATUR | #012 | 09:15:03 | 31 | -30 | 30 |
| rl: | 2020 209 08 35 48 Reset Warm -> Tepid from 2020 209 08 35 42 until 2020 209 08 35 42 . Counts: 1,0 | 1 | 3 | B21020.206 | SATUR | #206 | 08:30:28 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B21020.014 | TORON | #014 | 14:09:16 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 3 | 10 | B21020.014 | TORON | #014 | 17:20:25 | | 1 | -1 |
| ds: | DS intensity too high ( 286808/cy) quitting. | 4 | 99 | B21020.014 | TORON | #014 | 18:04:28 | | 1 | -1 |
| rl: | 2020 209 05 43 23 Reset Warm -> Tepid from 2020 209 05 43 17 until 2020 209 05 43 18 . Counts: 1,0 | 1 | 3 | B21020.190 | TORON | #190 | 05:34:53 | | 1 | -1 |
| zs: | ZS intensity too low ( 127/cy), skipping. | 2 | 99 | B21020.190 | TORON | #190 | 10:12:01 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B21020.190 | TORON | #190 | 12:44:03 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B21020.190 | TORON | #190 | 12:44:08 | | 1 | -1 |
| zz: | Command file zz not found --- continuing | 1 | 99 | B21020.190 | TORON | #190 | 12:44:17 | continuing | 1 | -1 |
| rl: | 2020 210 20 33 03 Reset Warm -> Tepid from 2020 210 20 32 32 until 2020 210 20 32 32 . Counts: 1,0 | 1 | 3 | B21020.195 | TORON | #195 | 05:36:43 | | 1 | -1 |
| rl: | 2020 210 20 33 04 Motor #9: appears stuck with a reference sensor activated. | 1 | 3 | B21020.195 | TORON | #195 | 05:36:45 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B21020.195 | TORON | #195 | 05:38:16 | | 1 | -1 |
| zs: | ZS intensity too low ( 151/cy), skipping. | 2 | 99 | B21020.195 | TORON | #195 | 10:12:18 | | 1 | -1 |
| ux: | HOME key pressed | 2 | 99 | B21020.195 | TORON | #195 | 19:57:17 | | 1 | -1 |
| ux: | Going to menu | 1 | 99 | B21020.195 | TORON | #195 | 19:58:14 | | 1 | -1 |
| rl: | 2020 209 05 38 07 Reset Warm -> Tepid from 2020 209 05 38 01 until 2020 209 05 38 01 . Counts: 1,0 | 1 | 3 | B21020.246 | TORON | #246 | 05:30:03 | | 1 | -1 |
| rl: | 2020 209 06 05 58 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 4 | 3 | B21020.246 | TORON | #246 | 05:30:06 | | 1 | -1 |
| rl: | 2020 209 06 05 58 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 4 | 3 | B21020.246 | TORON | #246 | 05:30:06 | | 1 | -1 |
| rl: | 2020 210 13 15 00 New value set for watermark LOOP.RUN.TIME: 724.000025 millisec. | 2 | 3 | B21020.246 | TORON | #246 | 05:30:15 | | 1 | -1 |
| rl: | 2020 210 13 15 00 New value set for watermark LOOP.RUN.TIME: 724.000025 millisec. | 2 | 3 | B21020.246 | TORON | #246 | 05:30:15 | | 1 | -1 |
| dp: | Doing dispersion with internal HG. | 1 | 99 | B21020.246 | TORON | #246 | 08:16:54 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 1 | 10 | B21020.246 | TORON | #246 | 16:15:16 | | 1 | -1 |
| sc: | SC intensity too low ( 12/cy), skipping. | 1 | 3 | B21020.246 | TORON | #246 | 23:00:19 | | 1 | -1 |