Analysing b-file records for potential instrument or data problems.

Critical warnings from b-files' comments for days between 2020057 and 2020057 (1 sec, 37 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
fz:	Suppressed oscillation of filter wheel.	62	5	B05720.021	AMUND	#021	21:10:13		1	-1
ds:	Brewer failed to respond 5 times	1	1	B05720.187	CARE	#187	18:19:12		1	-1
ds:	Brewer failed to respond 5 times	1	1	B05720.191	CARE	#191	18:18:42		1	-1
rl:	2020 057 16 52 09 Attempt to exceed max boundary	70	3	B05720.203	CHURC	#203	06:32:44		1	-1
rl:	2020 057 16 52 09 <M,10,10	70	3	B05720.203	CHURC	#203	06:32:45		1	-1
rl:	2020 057 16 52 09 <M,10,10	70	5	B05720.203	CHURC	#203	06:32:45		1	-1
fr:	11000 steps - QUIT - Micrometer #1 reference not found	3	1	B05720.203	CHURC	#203	12:20:07		1	-1
rl:	2020 056 06 37 17 Motor #11: appears stuck with a reference sensor activated.	1	1	B05720.239	CHURC	#239	06:32:37		1	-1
rl:	2020 056 06 55 13 New value set for watermark LOOP.RUN.TIME: 661.999989 millisec.	5	3	B05720.239	CHURC	#239	06:32:38		1	-1
rl:	2020 056 06 55 13 New value set for watermark LOOP.RUN.TIME: 661.999989 millisec.	5	3	B05720.239	CHURC	#239	06:32:38		1	-1
hg:	Lamp not on... hg test terminated F1= 0 F4= 259	5	1	B05720.069	EUREK	#069	06:20:39		1	-1
hg:	Lamp not detected f1= 0 f4= 259	5	1	B05720.069	EUREK	#069	06:20:40		1	-1
hg:	HG failed	3	1	B05720.069	EUREK	#069	06:20:41	failed	1	-1
rl:	2020 056 06 13 16 Motor #2: appears stuck with a reference sensor activated.	2	1	B05720.223	EUREK	#223	06:05:29		1	-1
rl:	2020 056 06 39 56 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	7	3	B05720.223	EUREK	#223	06:05:34		1	-1
rl:	2020 056 06 39 56 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	7	3	B05720.223	EUREK	#223	06:05:34		1	-1
ds:	Suppressed oscillation of filter wheel.	5	5	B05720.018	GOOSE	#018	15:07:46		1	-1
hg:	Lamp not on... hg test terminated F1= 0 F4= 0	1	1	B05720.018	GOOSE	#018	20:46:36		1	-1
hg:	No intensity detected. Check PMT.	1	1	B05720.018	GOOSE	#018	20:46:37		1	-1
hg:	Lamp not detected f1= 0 f4= 0	1	1	B05720.018	GOOSE	#018	20:46:38		1	-1
hp:	Spectrometer alignment trouble.	1	1	B05720.204	GOOSE	#204	13:00:52		1	-1
hg:	Lamp not on... hg test terminated F1= 2 F4= 1	1	1	B05720.204	GOOSE	#204	13:03:29		1	-1
hg:	Lamp not detected f1= 2 f4= 1	1	1	B05720.204	GOOSE	#204	13:03:30		1	-1
rl:	2020 050 19 56 39 <M,10,-9:M,10,-1>	70	3	B05720.204	GOOSE	#204	13:12:09		1	-1
rl:	2020 050 19 56 39 <M,10,-9:M,10,-1>	69	5	B05720.204	GOOSE	#204	13:12:09		1	-1
rl:	2020 050 19 56 39 Attempt to exceed min boundary	68	3	B05720.204	GOOSE	#204	13:12:10		1	-1
rl:	2020 050 19 57 04 Motor #10: appears stuck with a reference sensor activated.	5	1	B05720.204	GOOSE	#204	13:15:31		1	-1
rl:	2020 050 19 57 04 Motor #10: appears stuck with a reference sensor activated.	5	3	B05720.204	GOOSE	#204	13:15:31		1	-1
ds:	Suppressed oscillation of filter wheel.	14	5	B05720.009	MAUNA	#009	20:21:37		1	-1
ds:	Suppressed oscillation of filter wheel.	17	5	B05720.119	MAUNA	#119	17:32:04		1	-1
hp:	Spectrometer alignment trouble.	1	1	B05720.119	MAUNA	#119	20:56:55		1	-1
rl:	2020 056 07 07 52 New value set for watermark LOOP.RUN.TIME: 683.000040 millisec.	5	3	B05720.235	RESOL	#235	06:38:16		1	-1
rl:	2020 056 07 07 52 New value set for watermark LOOP.RUN.TIME: 683.000040 millisec.	5	3	B05720.235	RESOL	#235	06:38:16		1	-1
menu:	Brewer failed to respond 5 times	1	1	B05720.085	TORON	#085	11:53:12		1	-1
sl:	Lamp not on... sl test terminated F1= 1 F4= 3	1	1	B05720.190	TORON	#190	22:24:59		1	-1
hp:	Spectrometer alignment trouble.	4	1	B05720.190	TORON	#190	22:26:16		1	-1
re:	Previous RE didn't seem to help, so not doing reset again. Operator intervention required. Quitting to menu.	1	1	B05720.190	TORON	#190	22:44:07		1	-1

Instrument constant changes for the week before 2020057 (2 sec, 0 rows)

Serial	YYYYJJJ	SL Current	SL Voltage
223	2020050	-12.14	24.43
235	2020050	-11.83	24.31
223	2020051	-12.14	24.4
235	2020051	-11.86	24.28
239	2020051	-12.04	24.2
223	2020052	-12.15	24.4
235	2020052	-11.83	24.28
239	2020052	-11.99	24.22
223	2020053	-12.14	24.43
235	2020053	-11.85	24.28
239	2020053	-11.99	24.28
223	2020054	-12.14	24.43
235	2020054	-11.85	24.28
239	2020054	-11.99	24.28
223	2020055	-12.14	24.4
235	2020055	-11.83	24.31
239	2020055	-11.99	24.28
223	2020056	-12.15	24.4
235	2020056	-11.86	24.25
239	2020056	-11.99	24.25
223	2020057	-12.15	24.4
224	2020057	-12.15	24.28
235	2020057	-11.86	24.25
239	2020057	-11.99	24.25

Serial	YYYYJJJ	HG large	max correction
012	2020057	1	14.9
069	2020057	7	19.4
203	2020057	2	4.3
204	2020057	3	5.0
224	2020057	2	17.1
239	2020057	1	13.7

Non-critical warnings from b-files' comments for days between 2020057 and 2020057 (1 sec, 60 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
rl:	2020 056 04 35 56 Reset Warm -> Tepid from 2020 056 04 35 50 until 2020 056 04 35 51 . Counts: 1,0	1	3	B05720.194	ALERT	#194	04:31:24		1	-1
re:	Azimuth discrepancy = -51	1	99	B05720.194	ALERT	#194	04:38:25	-51	-30	30
zs:	Will do AZ for SPO	1	99	B05720.021	AMUND	#021	14:57:12	SPO	1	-1
ds:	DS intensity too low ( 1/cy), skipping.	1	99	B05720.145	CARE	#145	12:08:11		1	-1
rl:	Log item overwritten by later entry.	1	3	B05720.203	CHURC	#203	06:32:42		1	-1
hp:	HOME key pressed	3	99	B05720.203	CHURC	#203	10:57:22		1	-1
hp:	Going to menu	2	99	B05720.203	CHURC	#203	10:58:21		1	-1
ds:	Suppressed oscillation of filter wheel.	3	5	B05720.203	CHURC	#203	20:17:17		1	-1
rl:	2020 056 06 37 16 Reset Warm -> Tepid from 2020 056 06 37 10 until 2020 056 06 37 10 . Counts: 1,0	1	3	B05720.239	CHURC	#239	06:32:36		1	-1
rl:	2020 056 06 37 17 Motor #11: appears stuck with a reference sensor activated.	1	3	B05720.239	CHURC	#239	06:32:37		1	-1
rl:	2020 056 06 55 13 New value set for watermark LOOP.RUN.TIME: 661.999989 millisec.	3	3	B05720.239	CHURC	#239	06:32:38		1	-1
rl:	2020 056 06 55 13 New value set for watermark LOOP.RUN.TIME: 661.999989 millisec.	3	3	B05720.239	CHURC	#239	06:32:38		1	-1
rl:	2020 057 07 48 59 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	2	3	B05720.239	CHURC	#239	06:32:42		1	-1
rl:	2020 057 07 48 59 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	2	3	B05720.239	CHURC	#239	06:32:42		1	-1
rl:	2020 056 06 09 47 Reset Warm -> Tepid from 2020 056 06 09 41 until 2020 056 06 09 42 . Counts: 1,0	1	3	B05720.192	EUREK	#192	06:03:42		1	-1
rl:	2020 056 06 12 08 Reset Warm -> Tepid from 2020 056 06 12 03 until 2020 056 06 12 03 . Counts: 1,0	1	3	B05720.223	EUREK	#223	06:05:27		1	-1
rl:	2020 056 06 39 56 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	3	3	B05720.223	EUREK	#223	06:05:34		1	-1
rl:	2020 056 06 39 56 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	3	3	B05720.223	EUREK	#223	06:05:34		1	-1
rl:	2020 057 07 43 18 New value set for watermark LOOP.RUN.TIME: 714.000034 millisec.	4	3	B05720.223	EUREK	#223	06:05:41		1	-1
rl:	2020 057 07 43 18 New value set for watermark LOOP.RUN.TIME: 714.000034 millisec.	4	3	B05720.223	EUREK	#223	06:05:41		1	-1
cfg_out:	Illegal command (cfg	1	99	B05720.223	EUREK	#223	06:05:54		1	-1
rl:	2020 057 12 11 12 Attempt to exceed min boundary	4	3	B05720.204	GOOSE	#204	04:23:26		1	-1
rl:	2020 057 12 11 12 <M,10,-7152>	4	3	B05720.204	GOOSE	#204	04:23:28		1	-1
rl:	2020 057 12 11 12 <M,10,-7152>	4	5	B05720.204	GOOSE	#204	04:23:28		1	-1
fr:	Micrometer #1 reference found at step-1234 (+CAL)=-221 Now set to o3 offset = 7152	1	99	B05720.204	GOOSE	#204	12:12:24	(+CAL)=-221	1000	9000
rl:	2020 050 19 56 59 Bad command string. Command string buffer cleared.	1	3	B05720.204	GOOSE	#204	13:15:28		1	-1
rl:	2020 050 19 56 59 Bad command string. Command string buffer cleared.	1	3	B05720.204	GOOSE	#204	13:15:28		1	-1
rl:	HOME key pressed	1	99	B05720.204	GOOSE	#204	13:15:32		1	-1
ds:	Suppressed oscillation of filter wheel.	4	5	B05720.204	GOOSE	#204	15:16:29		1	-1
ds:	DS intensity too low ( 165/cy), skipping.	2	99	B05720.009	MAUNA	#009	04:07:45		1	-1
zs:	ZS intensity too low ( 194/cy), skipping.	2	99	B05720.009	MAUNA	#009	04:18:12		1	-1
uv:	HOME key pressed	1	99	B05720.009	MAUNA	#009	20:41:45		1	-1
uv:	UV standard scan aborted	1	3	B05720.009	MAUNA	#009	20:41:47		1	-1
uv:	Going to menu	1	99	B05720.009	MAUNA	#009	20:42:01		1	-1
zs:	ZS is not done when solar zenith angle less than 30 degrees. Skipping.	1	10	B05720.009	MAUNA	#009	22:16:32		1	-1
ds:	DS intensity too low ( 148/cy), skipping.	2	99	B05720.119	MAUNA	#119	04:09:10		1	-1
re:	Azimuth discrepancy = -37	1	99	B05720.119	MAUNA	#119	10:51:09	-37	-30	30
ux:	HOME key pressed	1	99	B05720.119	MAUNA	#119	20:41:49		1	-1
ux:	Going to menu	1	99	B05720.119	MAUNA	#119	20:42:27		1	-1
rl:	2020 056 06 43 45 Reset Warm -> Tepid from 2020 056 06 43 39 until 2020 056 06 43 40 . Counts: 1,0	1	3	B05720.205	RESOL	#205	06:37:46		1	-1
rl:	2020 056 06 41 06 Reset Warm -> Tepid from 2020 056 06 41 00 until 2020 056 06 41 00 . Counts: 1,0	1	3	B05720.235	RESOL	#235	06:38:14		1	-1
rl:	2020 056 07 07 52 New value set for watermark LOOP.RUN.TIME: 683.000040 millisec.	4	3	B05720.235	RESOL	#235	06:38:16		1	-1
rl:	2020 056 07 07 52 New value set for watermark LOOP.RUN.TIME: 683.000040 millisec.	4	3	B05720.235	RESOL	#235	06:38:16		1	-1
rl:	2020 057 13 29 06 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	1	3	B05720.235	RESOL	#235	06:38:25		1	-1
rl:	2020 057 13 29 06 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	1	3	B05720.235	RESOL	#235	06:38:25		1	-1
ds:	DS intensity too high ( 361702/cy) quitting.	1	99	B05720.012	SATUR	#012	20:15:41		1	-1
rl:	2020 056 08 33 36 Reset Warm -> Tepid from 2020 056 08 33 30 until 2020 056 08 33 31 . Counts: 1,0	1	3	B05720.206	SATUR	#206	08:29:13		1	-1
rl:	2020 057 00 54 05 New value set for watermark SUPPLY.VOLTAGE.LOW[HV]: 1510.208845 Volts.	1	3	B05720.206	SATUR	#206	08:29:15		1	-1
zs:	ZS intensity too low ( 245/cy), skipping.	2	99	B05720.206	SATUR	#206	15:08:59		1	-1
ds:	DS intensity too high ( 203655/cy) quitting.	3	99	B05720.055	STONY	#055	16:49:31		1	-1
re:	Illegal command (re) in schedule s60mk2, ignoring	1	99	B05720.014	TORON	#014	05:42:27		1	-1
zs:	ZS intensity too low ( 454/cy), skipping.	4	99	B05720.014	TORON	#014	12:40:08		1	-1
re:	Zenith discrepancy = 19	1	99	B05720.026	TORON	#026	05:32:30	19	-10	10
md:	Illegal command (md) in schedule mb, ignoring	1	99	B05720.026	TORON	#026	06:09:48		1	-1
hh:	Bad or missing hs.cfg file creating new defaults.	1	5	B05720.026	TORON	#026	07:22:01		1	-1
re:	Illegal command (re) in schedule ecsc, ignoring	1	99	B05720.190	TORON	#190	05:36:50		1	-1
skc:	Going to menu	1	99	B05720.190	TORON	#190	22:44:08		1	-1
dsp:	Doing dispersion test with Cd (quartz window)	4	99	B05720.224	TORON	#224	13:31:01		1	-1
hg:	HOME key pressed	2	99	B05720.224	TORON	#224	13:33:05		1	-1
hg:	Going to menu	2	99	B05720.224	TORON	#224	13:33:06		1	-1

Measurements and tests summary.

_jday	_loc	_serial	_skc	aode	ds	dt	ed	fz	hg	hp	rs	sl	um	uv	zs
057	MAUNA LOA OBS	#009	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.11799)	84	84	2	1		15		2	6		50	14
057	SATURNA	#012	ecsc	38	39	2	1	1	14		2	5		49	46
057	TORONTO	#014	Next schedule will be S60MK2 (now s60mk2 ZS= 92 ZS= 92.574),s60mk2			1	1		22		1	7		49	76
057	GOOSE BAY	#018	ecsc	52	52	2	1		16		2	6		45	37
057	ALERT	#019	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.012),Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.027)			2	1		15		2	7		51	11
057	AMUNDSEN-SCOTT	#021	spsun		169	1	1	148	12	11	1	1			57
057	TORONTO	#026	mb,Waiting until ZA = -96 now -100.7,Waiting until ZA = -96 now -102.5,Waiting until ZA = -96 now -104.3,Waiting until ZA = -96 now -106.2,Waiting until ZA = -96 now -108,Waiting until ZA = -96 now -109.8,Waiting until ZA = -96 now -111.6,Waiting until ZA = -96 now -113.3,Waiting until ZA = -96 now -115.1,Waiting until ZA = -96 now -116.9,Waiting until ZA = -96 now -118.6,Waiting until ZA = -96 now -120.3,Waiting until ZA = -96 now -122.1,Waiting until ZA = -96 now -123.7,Waiting until ZA = -96 now -125.4,Waiting until ZA = -96 now -127,Waiting until ZA = -96 now -128.6,Waiting until ZA = -96 now -130.2,Waiting until ZA = -96 now -131.7,Waiting until ZA = -96 now -133.2,Waiting until ZA = -96 now -134.6,Waiting until ZA = -96 now -135.9			1			4		1	1
057	ALERT	#029	ecsc	2	2	2	1		11		2	6		54	12
057	RESOLUTE	#031	ecsc	6	6	2	1	17	22		2	6		50	42
057	STONY PLAIN	#055	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.473)	71	74	2	1	5	21		2	7		53	8
057	EUREKA	#069	ecsc	15	15	2	1	13	27		2	7		45	17
057	TORONTO	#083	menu
057	TORONTO	#085	menu
057	MAUNA LOA OBS	#119	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.019)	60	60	2	1		20	18	2	8		45	13
057	CARE	#145	ecsc	44	44	2		2	7	6	2	4		30	8
057	CARE	#187	S60MK3	6	6	1			13	12	1	3	10	22	34
057	TORONTO	#190	ecsc,Going to menu	21	21	2		2	8	7	2	3		37	36
057	CARE	#191	ecnouv	20	20	1		2	8	6	1	4			42
057	EUREKA	#192	ecsc	20	20	2	1	19	8	8	2	5		35	11
057	ALERT	#194	ecsc	3	3	2	1		11	10	2	7		35	7
057	TORONTO	#195	menu
057	CHURCHILL	#203	menu,Starting schedule ecnouv,Starting schedule ecsc	67	68		1	7	10	7		5			9
057	GOOSE BAY	#204	menu	39	39		1	1	9	6		4		32	9
057	RESOLUTE	#205	ecsc	5	5	2	1	11	13	11	2	6		36	33
057	SATURNA	#206	ecsc		31	2	1	1	13	11	2	6		41	35
057	EUREKA PEARL	#223	ecsc	3	3	2	1	18	10	10	2	7		40	5
057	TORONTO	#224	menu						5	6
057	RESOLUTE	#235	cal			1	1	59	16	17	1	7			43
057	CHURCHILL	#239	ecsc	44	44	2	1	9	12	13	2	6		49	11

(1 sec)

Database last updated on Wed, 09 Sep 2026 05:41:00 +0000 by localhost

Critical warnings from b-files' comments for days between 2020057 and 2020057 (1 sec, 37 rows)

Instrument constant changes for the week before 2020057 (2 sec, 0 rows)

SL burned out? (AP results when SL is ON) (1 sec, 24 rows)

Hg with step corrections larger than 10 steps or multiple corrections larger than 2.5 steps (0 sec, 6 rows)

Non-critical warnings from b-files' comments for days between 2020057 and 2020057 (1 sec, 60 rows)

Measurements and tests summary.

Relative and absolute humidity for day 2020057 (2 sec, 23 rows)