| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2020 054 04 34 10 Reset Warm -> Tepid from 2020 054 04 34 04 until 2020 054 04 34 05 . Counts: 1,0 | 1 | 3 | B05520.194 | ALERT | #194 | 04:32:17 | | 1 | -1 |
| re: | Azimuth discrepancy = -35 | 1 | 99 | B05520.194 | ALERT | #194 | 04:36:40 | -35 | -30 | 30 |
| fz: | Will do AZ for SPO | 1 | 99 | B05520.021 | AMUND | #021 | 14:56:31 | SPO | 1 | -1 |
| az: | Azimuth discrepancy = -34 | 1 | 99 | B05520.021 | AMUND | #021 | 14:58:25 | -34 | -30 | 30 |
| zs: | ZS intensity too low ( 179/cy), skipping. | 2 | 99 | B05520.145 | CARE | #145 | 23:09:11 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B05520.187 | CARE | #187 | 14:50:24 | | 1 | -1 |
| ds: | DS intensity too low ( 407/cy), skipping. | 3 | 99 | B05520.187 | CARE | #187 | 21:32:34 | | 1 | -1 |
| rl: | 2020 054 05 44 44 Reset Warm -> Tepid from 2020 054 05 44 38 until 2020 054 05 44 39 . Counts: 1,0 | 1 | 3 | B05520.191 | CARE | #191 | 05:38:30 | | 1 | -1 |
| rl: | 2020 054 06 40 54 Reset Warm -> Tepid from 2020 054 06 40 48 until 2020 054 06 40 48 . Counts: 1,0 | 1 | 3 | B05520.203 | CHURC | #203 | 06:37:33 | | 1 | -1 |
| rl: | 2020 055 17 11 34 New value set for watermark SUPPLY.VOLTAGE.HIGH[-12V]: -10.998001 Volts. | 1 | 3 | B05520.203 | CHURC | #203 | 06:37:36 | | 1 | -1 |
| hh: | Bad or missing hs.cfg file creating new defaults. | 1 | 5 | B05520.203 | CHURC | #203 | 07:23:55 | | 1 | -1 |
| mf: | Illegal command (mf) in schedule ecsc, ignoring | 4 | 99 | B05520.203 | CHURC | #203 | 09:10:11 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B05520.203 | CHURC | #203 | 20:14:23 | | 1 | -1 |
| rl: | 2020 054 06 38 08 Reset Warm -> Tepid from 2020 054 06 38 02 until 2020 054 06 38 03 . Counts: 1,0 | 1 | 3 | B05520.239 | CHURC | #239 | 06:33:15 | | 1 | -1 |
| rl: | 2020 054 06 38 09 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B05520.239 | CHURC | #239 | 06:33:16 | | 1 | -1 |
| rl: | 2020 055 07 40 59 New value set for watermark LOOP.RUN.TIME: 714.000034 millisec. | 1 | 3 | B05520.239 | CHURC | #239 | 06:33:27 | | 1 | -1 |
| rl: | 2020 055 07 40 59 New value set for watermark LOOP.RUN.TIME: 714.000034 millisec. | 1 | 3 | B05520.239 | CHURC | #239 | 06:33:27 | | 1 | -1 |
| zs: | ZS intensity too low ( 347/cy), skipping. | 1 | 99 | B05520.239 | CHURC | #239 | 13:39:47 | | 1 | -1 |
| rl: | 2020 054 06 07 29 Reset Warm -> Tepid from 2020 054 06 07 23 until 2020 054 06 07 24 . Counts: 1,0 | 1 | 3 | B05520.192 | EUREK | #192 | 06:05:31 | | 1 | -1 |
| rl: | 2020 054 06 08 45 Reset Warm -> Tepid from 2020 054 06 08 39 until 2020 054 06 08 40 . Counts: 1,0 | 1 | 3 | B05520.223 | EUREK | #223 | 06:04:03 | | 1 | -1 |
| rl: | 2020 054 06 33 12 New value set for watermark LOOP.RUN.TIME: 700.000000 millisec. | 3 | 3 | B05520.223 | EUREK | #223 | 06:04:10 | | 1 | -1 |
| rl: | 2020 054 06 33 12 New value set for watermark LOOP.RUN.TIME: 700.000000 millisec. | 3 | 3 | B05520.223 | EUREK | #223 | 06:04:10 | | 1 | -1 |
| cfg_out: | Illegal command (cfg | 1 | 99 | B05520.223 | EUREK | #223 | 06:04:23 | | 1 | -1 |
| ds: | DS intensity too high ( 242186/cy) quitting. | 1 | 99 | B05520.009 | MAUNA | #009 | 02:10:26 | | 1 | -1 |
| ds: | DS intensity too low ( 314/cy), skipping. | 4 | 99 | B05520.009 | MAUNA | #009 | 03:07:49 | | 1 | -1 |
| zs: | ZS intensity too low ( 491/cy), skipping. | 3 | 99 | B05520.009 | MAUNA | #009 | 04:09:41 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B05520.009 | MAUNA | #009 | 20:22:02 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B05520.009 | MAUNA | #009 | 20:22:48 | | 1 | -1 |
| sr: | Azimuth discrepancy = -2645 | 1 | 99 | B05520.009 | MAUNA | #009 | 20:29:12 | -2645 | -30 | 30 |
| si: | New SI, HC = 11, NC = 1630 Old = 11 , 1630 | 1 | 99 | B05520.009 | MAUNA | #009 | 20:38:16 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 1 | 10 | B05520.009 | MAUNA | #009 | 22:16:38 | | 1 | -1 |
| ds: | DS intensity too low ( 110/cy), skipping. | 2 | 99 | B05520.119 | MAUNA | #119 | 04:09:10 | | 1 | -1 |
| ux: | HOME key pressed | 1 | 99 | B05520.119 | MAUNA | #119 | 20:21:57 | | 1 | -1 |
| ux: | UV extended scan aborted | 1 | 3 | B05520.119 | MAUNA | #119 | 20:21:59 | | 1 | -1 |
| ux: | Going to menu | 1 | 99 | B05520.119 | MAUNA | #119 | 20:22:27 | | 1 | -1 |
| sr: | Azimuth discrepancy = -2160 | 1 | 99 | B05520.119 | MAUNA | #119 | 20:29:07 | -2160 | -30 | 30 |
| si: | New SI, HC = 12, NC = 1651 Old = 13 , 1651 | 1 | 99 | B05520.119 | MAUNA | #119 | 20:37:56 | | 1 | -1 |
| ux: | UV extended scan finished, incident DUV = 745.8382 mW/m^2 | 1 | 99 | B05520.119 | MAUNA | #119 | 22:40:11 | 745.8382 | -1 | 450 |
| zs: | ZS intensity too low ( 151/cy), skipping. | 4 | 99 | B05520.205 | RESOL | #205 | 14:46:39 | | 1 | -1 |
| rl: | 2020 055 20 34 06 Reset Tepid -> Tepid from 2020 055 20 33 45 until 2020 055 20 34 00 . Counts: 1,0 | 1 | 3 | B05520.235 | RESOL | #235 | 06:39:26 | | 1 | -1 |
| rl: | 2020 055 20 34 06 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B05520.235 | RESOL | #235 | 06:39:28 | | 1 | -1 |
| rl: | 2020 055 20 34 07 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B05520.235 | RESOL | #235 | 06:39:31 | | 1 | -1 |
| rl: | 2020 055 20 35 08 New value set for watermark LOOP.RUN.TIME: 831.999969 millisec. | 1 | 3 | B05520.235 | RESOL | #235 | 06:39:33 | | 1 | -1 |
| rl: | 2020 055 20 35 08 New value set for watermark LOOP.RUN.TIME: 831.999969 millisec. | 1 | 3 | B05520.235 | RESOL | #235 | 06:39:33 | | 1 | -1 |
| rl: | 2020 054 08 33 36 Reset Warm -> Tepid from 2020 054 08 33 31 until 2020 054 08 33 31 . Counts: 1,0 | 1 | 3 | B05520.206 | SATUR | #206 | 08:32:27 | | 1 | -1 |
| zs: | ZS intensity too low ( 210/cy), skipping. | 1 | 99 | B05520.206 | SATUR | #206 | 15:10:00 | | 1 | -1 |
| ds: | DS intensity too high ( 216470/cy) quitting. | 2 | 99 | B05520.206 | SATUR | #206 | 18:45:28 | | 1 | -1 |
| re: | Illegal command (re) in schedule s60mk2nv, ignoring | 1 | 99 | B05520.008 | TORON | #008 | 05:34:17 | | 1 | -1 |
| ds: | DS intensity too low ( 92/cy), skipping. | 1 | 99 | B05520.008 | TORON | #008 | 12:39:49 | | 1 | -1 |
| zs: | HOME key pressed | 1 | 99 | B05520.008 | TORON | #008 | 13:27:28 | | 1 | -1 |
| zs: | ZS measurement terminated | 1 | 5 | B05520.008 | TORON | #008 | 13:27:29 | | 1 | -1 |
| zs: | Going to menu | 1 | 99 | B05520.008 | TORON | #008 | 13:27:30 | | 1 | -1 |
| re: | Illegal command (re) in schedule s60mk2, ignoring | 1 | 99 | B05520.014 | TORON | #014 | 05:36:43 | | 1 | -1 |
| ds: | DS intensity too low ( 166/cy), skipping. | 4 | 99 | B05520.014 | TORON | #014 | 12:43:52 | | 1 | -1 |
| re: | Zenith discrepancy = -818 | 1 | 99 | B05520.014 | TORON | #014 | 13:27:29 | -818 | -10 | 10 |
| re: | Azimuth discrepancy = -4864 | 2 | 99 | B05520.014 | TORON | #014 | 13:28:06 | -4864 | -30 | 30 |
| hg: | HOME key pressed | 1 | 99 | B05520.014 | TORON | #014 | 14:24:22 | | 1 | -1 |
| hg: | Going to menu | 1 | 99 | B05520.014 | TORON | #014 | 14:24:23 | | 1 | -1 |
| si: | New SI, HC = 12, NC = 103 Old = 10 , 88 | 1 | 99 | B05520.014 | TORON | #014 | 14:27:46 | | 1 | -1 |
| re: | Illegal command (re) in schedule to3mk2um, ignoring | 1 | 99 | B05520.015 | TORON | #015 | 05:37:08 | | 1 | -1 |
| ds: | DS intensity too low ( 1/cy), skipping. | 3 | 99 | B05520.015 | TORON | #015 | 11:57:17 | | 1 | -1 |
| hg: | HOME key pressed | 1 | 99 | B05520.015 | TORON | #015 | 13:27:55 | | 1 | -1 |
| hg: | Going to menu | 1 | 99 | B05520.015 | TORON | #015 | 13:27:56 | | 1 | -1 |
| re: | Zenith discrepancy = -1417 | 2 | 99 | B05520.083 | TORON | #083 | 10:38:34 | -1417 | -10 | 10 |
| re: | Azimuth discrepancy = -7416 | 2 | 99 | B05520.083 | TORON | #083 | 10:39:30 | -7416 | -30 | 30 |
| zs: | HOME key pressed | 1 | 99 | B05520.083 | TORON | #083 | 13:27:28 | | 1 | -1 |
| zs: | Going to menu | 1 | 99 | B05520.083 | TORON | #083 | 13:27:30 | | 1 | -1 |
| zs: | ZS measurement terminated | 1 | 5 | B05520.083 | TORON | #083 | 13:27:30 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B05520.190 | TORON | #190 | 05:36:08 | | 1 | -1 |
| zs: | ZS intensity too low ( 136/cy), skipping. | 1 | 99 | B05520.190 | TORON | #190 | 12:09:55 | | 1 | -1 |
| ux: | HOME key pressed | 1 | 99 | B05520.190 | TORON | #190 | 13:46:23 | | 1 | -1 |
| ux: | UV extended scan aborted | 1 | 3 | B05520.190 | TORON | #190 | 13:46:24 | | 1 | -1 |
| ux: | Going to menu | 1 | 99 | B05520.190 | TORON | #190 | 13:48:08 | | 1 | -1 |
| si: | New SI, HC = -7, NC = 170 Old = -8 , 165 | 1 | 99 | B05520.190 | TORON | #190 | 14:27:15 | | 1 | -1 |
| ds: | DS intensity too high ( 216771/cy) quitting. | 1 | 99 | B05520.190 | TORON | #190 | 17:18:17 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B05520.195 | TORON | #195 | 05:34:15 | | 1 | -1 |
| ux: | UV extended scan aborted | 1 | 3 | B05520.195 | TORON | #195 | 14:26:18 | | 1 | -1 |
| ux: | Going to menu | 3 | 99 | B05520.195 | TORON | #195 | 14:27:35 | | 1 | -1 |
| si: | New SI, HC = 7, NC = 810 Old = 8 , 815 | 1 | 99 | B05520.195 | TORON | #195 | 14:29:30 | | 1 | -1 |
| re: | Azimuth discrepancy = 16000 | 2 | 99 | B05520.195 | TORON | #195 | 18:44:48 | 16000 | -30 | 30 |