Analysing b-file records for potential instrument or data problems.

Critical warnings from b-files' comments for days between 2020054 and 2020054 (1 sec, 25 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
fz:	Suppressed oscillation of filter wheel.	42	5	B05420.021	AMUND	#021	12:41:21		1	-1
ds:	Suppressed oscillation of filter wheel.	14	5	B05420.145	CARE	#145	14:39:39		1	-1
rl:	2020 053 05 45 50 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.650932 Volts.	32	3	B05420.191	CARE	#191	05:38:54		1	-1
rl:	2020 053 06 34 59 Motor #11: appears stuck with a reference sensor activated.	1	1	B05420.239	CHURC	#239	06:33:49		1	-1
rl:	2020 053 06 52 55 New value set for watermark LOOP.RUN.TIME: 689.000034 millisec.	6	3	B05420.239	CHURC	#239	06:33:51		1	-1
rl:	2020 053 06 52 55 New value set for watermark LOOP.RUN.TIME: 689.000034 millisec.	6	3	B05420.239	CHURC	#239	06:33:51		1	-1
hg:	Lamp not on... hg test terminated F1= 1 F4= 246	6	1	B05420.069	EUREK	#069	06:17:55		1	-1
hg:	Lamp not detected f1= 1 f4= 246	6	1	B05420.069	EUREK	#069	06:17:56		1	-1
hg:	HG failed	3	1	B05420.069	EUREK	#069	06:17:57	failed	1	-1
rl:	2020 053 06 15 47 Motor #2: appears stuck with a reference sensor activated.	2	1	B05420.223	EUREK	#223	06:04:36		1	-1
rl:	2020 053 06 42 54 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	8	3	B05420.223	EUREK	#223	06:04:40		1	-1
rl:	2020 053 06 42 54 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	8	3	B05420.223	EUREK	#223	06:04:40		1	-1
rl:	2020 053 06 48 51 PMT counter failure	1	1	B05420.223	EUREK	#223	06:04:54		1	-1
hg:	Lamp not on... hg test terminated F1= 0 F4= 0	2	1	B05420.018	GOOSE	#018	04:39:49		1	-1
hg:	No intensity detected. Check PMT.	2	1	B05420.018	GOOSE	#018	04:39:50		1	-1
hg:	Lamp not detected f1= 0 f4= 0	2	1	B05420.018	GOOSE	#018	04:39:51		1	-1
hg:	HG failed	1	1	B05420.018	GOOSE	#018	04:39:52	failed	1	-1
ds:	Suppressed oscillation of filter wheel.	7	5	B05420.018	GOOSE	#018	15:21:27		1	-1
ds:	Suppressed oscillation of filter wheel.	13	5	B05420.009	MAUNA	#009	18:38:02		1	-1
ds:	Suppressed oscillation of filter wheel.	13	5	B05420.119	MAUNA	#119	17:53:49		1	-1
rl:	2020 053 15 42 28 Reset No -> Tepid from 2020 053 15 42 05 until 2057 017 09 14 07 . Counts: 1,0	7	3	B05420.205	RESOL	#205	06:39:56		1	-1
rl:	2020 053 15 42 29 Motor #3: appears stuck with a reference sensor activated.	2	1	B05420.205	RESOL	#205	06:39:59		1	-1
ds:	Suppressed oscillation of filter wheel.	11	5	B05420.083	TORON	#083	16:07:35		1	-1
zs:	Brewer failed to respond 5 times	1	1	B05420.083	TORON	#083	17:45:40		1	-1
ds:	Suppressed oscillation of filter wheel.	7	5	B05420.190	TORON	#190	15:46:26		1	-1

Instrument constant changes for the week before 2020054 (3 sec, 0 rows)

Serial	YYYYJJJ	SL Current	SL Voltage
223	2020047	-12.15	24.4
235	2020047	-11.86	24.25
223	2020048	-12.15	24.4
223	2020049	-12.14	24.43
235	2020049	-11.82	24.34
223	2020050	-12.14	24.43
235	2020050	-11.83	24.31
223	2020051	-12.14	24.4
235	2020051	-11.86	24.28
239	2020051	-12.04	24.2
223	2020052	-12.15	24.4
235	2020052	-11.83	24.28
239	2020052	-11.99	24.22
223	2020053	-12.14	24.43
235	2020053	-11.85	24.28
239	2020053	-11.99	24.28
223	2020054	-12.14	24.43
235	2020054	-11.85	24.28
239	2020054	-11.99	24.28

Serial	YYYYJJJ	HG large	max correction
012	2020054	1	18.7
015	2020054	2	8.3
021	2020054	2	4.0
069	2020054	6	20.4
190	2020054	2	9.3
239	2020054	1	14.4

Non-critical warnings from b-files' comments for days between 2020054 and 2020054 (1 sec, 55 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
rl:	2020 053 04 32 14 Reset Warm -> Tepid from 2020 053 04 32 09 until 2020 053 04 32 09 . Counts: 1,0	1	3	B05420.194	ALERT	#194	04:29:54		1	-1
ds:	DS intensity too low ( 2/cy), skipping.	4	99	B05420.194	ALERT	#194	15:09:43		1	-1
ds:	Will do AZ for SPO	1	99	B05420.021	AMUND	#021	14:54:29	SPO	1	-1
zs:	ZS intensity too low ( 121/cy), skipping.	2	99	B05420.145	CARE	#145	23:09:11		1	-1
ds:	DS intensity too low ( 153/cy), skipping.	2	99	B05420.187	CARE	#187	12:50:24		1	-1
ds:	Suppressed oscillation of filter wheel.	1	5	B05420.187	CARE	#187	15:07:00		1	-1
rl:	2020 053 05 44 35 Reset Warm -> Tepid from 2020 053 05 44 29 until 2020 053 05 44 30 . Counts: 1,0	1	3	B05420.191	CARE	#191	05:38:51		1	-1
mf:	Illegal command (mf) in schedule ecsc, ignoring	2	99	B05420.203	CHURC	#203	02:05:58		1	-1
rl:	2020 053 06 40 18 Reset Warm -> Tepid from 2020 053 06 40 12 until 2020 053 06 40 12 . Counts: 1,0	1	3	B05420.203	CHURC	#203	06:36:29		1	-1
hh:	Bad or missing hl.cfg file creating new defaults.	1	5	B05420.203	CHURC	#203	07:21:34		1	-1
zs:	ZS intensity too low ( 86/cy), skipping.	2	99	B05420.203	CHURC	#203	23:45:54		1	-1
rl:	2020 053 06 34 58 Reset Warm -> Tepid from 2020 053 06 34 52 until 2020 053 06 34 53 . Counts: 1,0	1	3	B05420.239	CHURC	#239	06:33:48		1	-1
rl:	2020 053 06 34 59 Motor #11: appears stuck with a reference sensor activated.	1	3	B05420.239	CHURC	#239	06:33:49		1	-1
rl:	2020 053 06 06 14 Reset Warm -> Tepid from 2020 053 06 06 08 until 2020 053 06 06 09 . Counts: 1,0	1	3	B05420.192	EUREK	#192	06:03:17		1	-1
rl:	2020 053 06 14 40 Reset Warm -> Tepid from 2020 053 06 14 34 until 2020 053 06 14 34 . Counts: 1,0	1	3	B05420.223	EUREK	#223	06:04:33		1	-1
rl:	2020 054 07 26 33 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	2	3	B05420.223	EUREK	#223	06:04:56		1	-1
rl:	2020 054 07 26 33 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	2	3	B05420.223	EUREK	#223	06:04:56		1	-1
cfg_out:	Illegal command (cfg	1	99	B05420.223	EUREK	#223	06:05:05		1	-1
ds:	DS intensity too high ( 202537/cy) quitting.	2	99	B05420.009	MAUNA	#009	00:05:45		1	-1
zs:	ZS intensity too low ( 481/cy), skipping.	1	99	B05420.009	MAUNA	#009	04:09:43		1	-1
zs:	ZS is not done when solar zenith angle less than 30 degrees. Skipping.	1	10	B05420.009	MAUNA	#009	22:16:32		1	-1
ds:	DS intensity too high ( 229422/cy) quitting.	3	99	B05420.119	MAUNA	#119	23:42:38		1	-1
rl:	2020 053 15 42 28 Checksum bad in low level command.	1	3	B05420.205	RESOL	#205	06:39:58		1	-1
rl:	2020 053 15 42 29 Motor #3: appears stuck with a reference sensor activated.	1	3	B05420.205	RESOL	#205	06:39:59		1	-1
rl:	2020 053 15 42 29 Motor #11: appears stuck with a reference sensor activated.	1	3	B05420.205	RESOL	#205	06:40:01		1	-1
rl:	2020 054 10 36 04 Bad command string. Command string buffer cleared.	1	3	B05420.205	RESOL	#205	06:40:19		1	-1
rl:	2020 054 10 36 04 Bad command string. Command string buffer cleared.	1	3	B05420.205	RESOL	#205	06:40:19		1	-1
rl:	2020 054 06 16 41 Attempt to exceed min boundary	4	3	B05420.205	RESOL	#205	06:40:22		1	-1
rl:	2020 054 06 16 41 <M,2,-27:M,1, 483>	4	3	B05420.205	RESOL	#205	06:40:23		1	-1
rl:	2020 054 06 16 41 <M,2,-27:M,1, 483>	4	5	B05420.205	RESOL	#205	06:40:23		1	-1
rl:	2020 053 06 42 14 Reset Warm -> Tepid from 2020 053 06 42 08 until 2020 053 06 42 08 . Counts: 1,0	1	3	B05420.235	RESOL	#235	06:40:48		1	-1
rl:	2020 054 15 04 18 New value set for watermark LOOP.RUN.TIME: 700.000000 millisec.	2	3	B05420.235	RESOL	#235	06:40:50		1	-1
rl:	2020 054 15 04 18 New value set for watermark LOOP.RUN.TIME: 700.000000 millisec.	2	3	B05420.235	RESOL	#235	06:40:50		1	-1
zs:	ZS intensity too low ( 75/cy), skipping.	3	99	B05420.012	SATUR	#012	15:09:34		1	-1
ds:	DS intensity too high ( 250401/cy) quitting.	3	99	B05420.012	SATUR	#012	17:40:51		1	-1
rl:	2020 053 08 34 33 Reset Warm -> Tepid from 2020 053 08 34 27 until 2020 053 08 34 28 . Counts: 1,0	1	3	B05420.206	SATUR	#206	08:29:01		1	-1
zs:	ZS intensity too low ( 161/cy), skipping.	1	99	B05420.206	SATUR	#206	15:09:24		1	-1
ds:	DS intensity too high ( 337252/cy) quitting.	2	99	B05420.206	SATUR	#206	17:48:15		1	-1
ds:	DS intensity too low ( 139/cy), skipping.	4	99	B05420.055	STONY	#055	14:51:08		1	-1
re:	Illegal command (re) in schedule s60mk2nv, ignoring	1	99	B05420.008	TORON	#008	05:41:56		1	-1
ds:	DS intensity too low ( 53/cy), skipping.	3	99	B05420.008	TORON	#008	12:41:30		1	-1
ds:	DS intensity too high ( 232506/cy) quitting.	1	99	B05420.008	TORON	#008	18:50:35		1	-1
re:	Illegal command (re) in schedule s60mk2, ignoring	1	99	B05420.014	TORON	#014	05:44:02		1	-1
ds:	DS intensity too low ( 27/cy), skipping.	3	99	B05420.014	TORON	#014	12:42:47		1	-1
ds:	DS intensity too high ( 250154/cy) quitting.	1	99	B05420.014	TORON	#014	15:16:33		1	-1
re:	Zenith discrepancy = -1419	1	99	B05420.014	TORON	#014	17:47:05	-1419	-10	10
re:	Azimuth discrepancy = -7576	1	99	B05420.014	TORON	#014	17:48:03	-7576	-30	30
re:	Illegal command (re) in schedule to3mk2um, ignoring	1	99	B05420.015	TORON	#015	05:35:11		1	-1
re:	Illegal command (re) in schedule ecsc, ignoring	1	99	B05420.083	TORON	#083	05:34:00		1	-1
ds:	DS intensity too low ( 2/cy), skipping.	3	99	B05420.083	TORON	#083	12:05:07		1	-1
zs:	ZS intensity too low ( 91/cy), skipping.	4	99	B05420.083	TORON	#083	12:05:21		1	-1
re:	Illegal command (re) in schedule ecsc, ignoring	1	99	B05420.190	TORON	#190	05:34:11		1	-1
ds:	DS intensity too high ( 369348/cy) quitting.	2	99	B05420.190	TORON	#190	15:18:08		1	-1
re:	Illegal command (re) in schedule ecsc, ignoring	1	99	B05420.195	TORON	#195	05:37:29		1	-1
ds:	DS intensity too high ( 280359/cy) quitting.	1	99	B05420.195	TORON	#195	15:16:41		1	-1

Measurements and tests summary.

_jday	_loc	_serial	_skc	aode	ds	dt	ed	fz	hg	hp	rs	sl	um	uv	zs
054	TORONTO	#008	Next schedule will be s60mk2nv (now s60mk2nv ZS= 92 ZS= 92),s60mk2nv,Waiting until ZA = 92 now 88.8,Waiting until ZA = 92 now 90.9,Waiting until ZA = -85 now -86.4,Waiting until ZA = -85 now -88.1		61	3	1		28		3	10			67
054	MAUNA LOA OBS	#009	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.503)	77	78	2	1		15		2	6		49	22
054	SATURNA	#012	ecsc	32	33	2	1	1	13		2	6		45	51
054	TORONTO	#014	Next schedule will be S60MK2 (now s60mk2 ZS= 92 ZS= 92.61),s60mk2	38	39	1	1		24		1	8		48	43
054	TORONTO	#015	Next schedule will be to3mk2um (now to3mk2um ZS= 100 ZS= 100),to3mk2um,Waiting until ZA = 100 now 98.8	39	39	1	1		61		1	19	106	74	19
054	GOOSE BAY	#018	ecsc	53	53	2	1		13		2	6		47	32
054	ALERT	#019	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.001),Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.01)			2	1		14		2	7		39	8
054	AMUNDSEN-SCOTT	#021	spsun		267	1	1	19	13	11	1	2			51
054	ALERT	#029	ecsc	1	1	2	1		13		2	5		40	7
054	RESOLUTE	#031	ecsc	13	13	2	1	20	19		2	5		45	34
054	STONY PLAIN	#055	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.092)	67	67	2	1	5	20		2	7		52	14
054	EUREKA	#069	ecsc	14	14	2	1		18		2	6		42	21
054	TORONTO	#083	ecsc	40	40	2		3	8		2	3		26	6
054	TORONTO	#085	menu
054	MAUNA LOA OBS	#119	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.277)	56	59	2	1		19	17	2	8		49	16
054	CARE	#145	ecsc	59	59	2	1	4	14	13	2	6		50	19
054	CARE	#187	S60MK3	35	35	1	1		23	20	1	6	22	41	39
054	TORONTO	#190	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.032)	52	54	2	1	2	13	10	2	6		46	12
054	CARE	#191	ecnouv	114	114	1	1	9	11	10	1	8			18
054	EUREKA	#192	ecsc	16	16	2	1	12	10	9	2	7		33	5
054	ALERT	#194	ecsc	4	4	2	1		10	9	2	7		26	8
054	TORONTO	#195	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.01)	55	56	2	1	3	11	11	2	6		46	11
054	CHURCHILL	#203	ecsc	25	25	2	1	6	9	8	2	6		41	34
054	GOOSE BAY	#204	menu
054	RESOLUTE	#205	ecsc	4	4	1	1	20	11	10	1	5		34	24
054	SATURNA	#206	ecsc		23	2	1	2	9	7	2	5		38	43
054	EUREKA PEARL	#223	ecsc	11	11	2	1	9	11	10	2	7		34	8
054	RESOLUTE	#235	cal			1	1	68	23	23	1	7			29
054	CHURCHILL	#239	ecsc	34	34	2	1	7	11	11	2	6		48	20

(2 sec)

Database last updated on Wed, 09 Sep 2026 05:41:00 +0000 by localhost

Critical warnings from b-files' comments for days between 2020054 and 2020054 (1 sec, 25 rows)

Instrument constant changes for the week before 2020054 (3 sec, 0 rows)

SL burned out? (AP results when SL is ON) (0 sec, 19 rows)

Hg with step corrections larger than 10 steps or multiple corrections larger than 2.5 steps (0 sec, 6 rows)

Non-critical warnings from b-files' comments for days between 2020054 and 2020054 (1 sec, 55 rows)

Measurements and tests summary.

Relative and absolute humidity for day 2020054 (2 sec, 25 rows)