| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
| rl: | 2020 052 04 36 48 Reset Warm -> Tepid from 2020 052 04 36 42 until 2020 052 04 36 43 . Counts: 1,0 | 1 | 3 | B05320.194 | ALERT | #194 | 04:27:52 | | 1 | -1 |
| re: | Azimuth discrepancy = -110 | 1 | 99 | B05320.194 | ALERT | #194 | 04:39:08 | -110 | -30 | 30 |
| ds: | DS intensity too low ( 2/cy), skipping. | 2 | 99 | B05320.194 | ALERT | #194 | 15:50:01 | | 1 | -1 |
| zs: | ZS intensity too low ( 59/cy), skipping. | 3 | 99 | B05320.194 | ALERT | #194 | 15:50:14 | | 1 | -1 |
| ds: | DS intensity too high ( 202975/cy) quitting. | 1 | 99 | B05320.021 | AMUND | #021 | 07:59:53 | | 1 | -1 |
| ds: | Will do AZ for SPO | 1 | 99 | B05320.021 | AMUND | #021 | 14:56:31 | SPO | 1 | -1 |
| zs: | ZS intensity too low ( 314/cy), skipping. | 3 | 99 | B05320.145 | CARE | #145 | 12:06:06 | | 1 | -1 |
| hg: | HOME key pressed | 1 | 99 | B05320.145 | CARE | #145 | 17:48:26 | | 1 | -1 |
| hg: | Going to menu | 1 | 99 | B05320.145 | CARE | #145 | 17:48:27 | | 1 | -1 |
| sr: | Azimuth discrepancy = 99 | 1 | 99 | B05320.145 | CARE | #145 | 18:09:54 | 99 | -30 | 30 |
| si: | New SI, HC = 12, NC = 44 Old = 11 , 44 | 1 | 99 | B05320.145 | CARE | #145 | 18:18:38 | | 1 | -1 |
| ds: | DS intensity too low ( 233/cy), skipping. | 1 | 99 | B05320.187 | CARE | #187 | 12:51:12 | | 1 | -1 |
| zs: | HOME key pressed | 1 | 99 | B05320.187 | CARE | #187 | 17:48:28 | | 1 | -1 |
| zs: | ZS measurement terminated | 1 | 5 | B05320.187 | CARE | #187 | 17:48:30 | | 1 | -1 |
| zs: | Going to menu | 1 | 99 | B05320.187 | CARE | #187 | 17:48:31 | | 1 | -1 |
| sr: | Azimuth discrepancy = -397 | 1 | 99 | B05320.187 | CARE | #187 | 18:09:58 | -397 | -30 | 30 |
| si: | New SI, HC = 3, NC = -1385 Old = 3 , -1385 | 1 | 99 | B05320.187 | CARE | #187 | 18:18:48 | | 1 | -1 |
| rl: | 2020 052 05 42 00 Reset Warm -> Tepid from 2020 052 05 41 54 until 2020 052 05 41 55 . Counts: 1,0 | 1 | 3 | B05320.191 | CARE | #191 | 05:38:30 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B05320.191 | CARE | #191 | 17:48:27 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B05320.191 | CARE | #191 | 17:48:31 | | 1 | -1 |
| sr: | Azimuth discrepancy = -123 | 1 | 99 | B05320.191 | CARE | #191 | 18:09:33 | -123 | -30 | 30 |
| si: | New SI, HC = -27, NC = -465 Old = -27 , -465 | 1 | 99 | B05320.191 | CARE | #191 | 18:18:44 | | 1 | -1 |
| rl: | 2020 052 06 40 41 Reset Warm -> Tepid from 2020 052 06 40 35 until 2020 052 06 40 36 . Counts: 1,0 | 1 | 3 | B05320.203 | CHURC | #203 | 06:35:52 | | 1 | -1 |
| rl: | 2020 053 18 31 42 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.699324 Volts. | 1 | 3 | B05320.203 | CHURC | #203 | 06:35:54 | | 1 | -1 |
| mf: | Illegal command (mf) in schedule ecsc, ignoring | 1 | 99 | B05320.203 | CHURC | #203 | 12:16:43 | | 1 | -1 |
| rl: | 2020 052 06 33 18 Reset Warm -> Tepid from 2020 052 06 33 12 until 2020 052 06 33 12 . Counts: 1,0 | 1 | 3 | B05320.239 | CHURC | #239 | 06:33:13 | | 1 | -1 |
| rl: | 2020 052 06 33 19 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B05320.239 | CHURC | #239 | 06:33:15 | | 1 | -1 |
| rl: | 2020 052 06 51 14 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 3 | 3 | B05320.239 | CHURC | #239 | 06:33:16 | | 1 | -1 |
| rl: | 2020 052 06 51 14 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 3 | 3 | B05320.239 | CHURC | #239 | 06:33:16 | | 1 | -1 |
| rl: | 2020 052 06 08 50 Reset Warm -> Tepid from 2020 052 06 08 45 until 2020 052 06 08 45 . Counts: 1,0 | 1 | 3 | B05320.192 | EUREK | #192 | 06:02:03 | | 1 | -1 |
| rl: | 2020 052 06 14 25 Reset Warm -> Tepid from 2020 052 06 14 20 until 2020 052 06 14 20 . Counts: 1,0 | 1 | 3 | B05320.223 | EUREK | #223 | 06:06:46 | | 1 | -1 |
| rl: | 2020 052 06 37 32 New value set for watermark LOOP.RUN.TIME: 711.999989 millisec. | 4 | 3 | B05320.223 | EUREK | #223 | 06:06:53 | | 1 | -1 |
| rl: | 2020 052 06 37 32 New value set for watermark LOOP.RUN.TIME: 711.999989 millisec. | 4 | 3 | B05320.223 | EUREK | #223 | 06:06:53 | | 1 | -1 |
| rl: | 2020 053 20 10 30 New value set for watermark LOOP.RUN.TIME: 724.000025 millisec. | 1 | 3 | B05320.223 | EUREK | #223 | 06:07:04 | | 1 | -1 |
| rl: | 2020 053 20 10 30 New value set for watermark LOOP.RUN.TIME: 724.000025 millisec. | 1 | 3 | B05320.223 | EUREK | #223 | 06:07:04 | | 1 | -1 |
| cfg_out: | Illegal command (cfg | 1 | 99 | B05320.223 | EUREK | #223 | 06:07:43 | | 1 | -1 |
| ds: | DS intensity too high ( 230666/cy) quitting. | 1 | 99 | B05320.018 | GOOSE | #018 | 17:34:35 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B05320.018 | GOOSE | #018 | 18:04:31 | | 1 | -1 |
| ds: | DS intensity too low ( 312/cy), skipping. | 3 | 99 | B05320.009 | MAUNA | #009 | 04:04:28 | | 1 | -1 |
| zs: | ZS intensity too low ( 417/cy), skipping. | 3 | 99 | B05320.009 | MAUNA | #009 | 04:09:42 | | 1 | -1 |
| ds: | DS intensity too low ( 74/cy), skipping. | 2 | 99 | B05320.119 | MAUNA | #119 | 04:09:10 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 1 | 10 | B05320.119 | MAUNA | #119 | 22:25:14 | | 1 | -1 |
| ds: | DS intensity too low ( 3/cy), skipping. | 2 | 99 | B05320.205 | RESOL | #205 | 14:51:18 | | 1 | -1 |
| zs: | ZS intensity too low ( 207/cy), skipping. | 3 | 99 | B05320.205 | RESOL | #205 | 14:51:33 | | 1 | -1 |
| rl: | 2020 052 06 47 11 Reset Warm -> Tepid from 2020 052 06 47 05 until 2020 052 06 47 06 . Counts: 1,0 | 1 | 3 | B05320.235 | RESOL | #235 | 06:37:30 | | 1 | -1 |
| rl: | 2020 052 07 40 41 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 3 | 3 | B05320.235 | RESOL | #235 | 06:37:32 | | 1 | -1 |
| rl: | 2020 052 07 40 41 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 3 | 3 | B05320.235 | RESOL | #235 | 06:37:32 | | 1 | -1 |
| rl: | 2020 053 08 31 04 New value set for watermark LOOP.RUN.TIME: 719.000006 millisec. | 1 | 3 | B05320.235 | RESOL | #235 | 06:37:39 | | 1 | -1 |
| rl: | 2020 053 08 31 04 New value set for watermark LOOP.RUN.TIME: 719.000006 millisec. | 1 | 3 | B05320.235 | RESOL | #235 | 06:37:39 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B05320.012 | SATUR | #012 | 19:04:25 | | 1 | -1 |
| ds: | DS intensity too high ( 269710/cy) quitting. | 2 | 99 | B05320.012 | SATUR | #012 | 19:23:22 | | 1 | -1 |
| rl: | 2020 052 08 33 55 Reset Warm -> Tepid from 2020 052 08 33 49 until 2020 052 08 33 50 . Counts: 1,0 | 1 | 3 | B05320.206 | SATUR | #206 | 08:29:58 | | 1 | -1 |
| zs: | ZS intensity too low ( 43/cy), skipping. | 1 | 99 | B05320.206 | SATUR | #206 | 15:12:07 | | 1 | -1 |
| ds: | DS intensity too high ( 203489/cy) quitting. | 4 | 99 | B05320.206 | SATUR | #206 | 17:11:09 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 4 | 5 | B05320.055 | STONY | #055 | 20:48:33 | | 1 | -1 |
| re: | Illegal command (re) in schedule s60mk2nv, ignoring | 1 | 99 | B05320.008 | TORON | #008 | 05:41:55 | | 1 | -1 |
| ds: | DS intensity too low ( 23/cy), skipping. | 2 | 99 | B05320.008 | TORON | #008 | 12:43:11 | | 1 | -1 |
| re: | Illegal command (re) in schedule s60mk2, ignoring | 1 | 99 | B05320.014 | TORON | #014 | 05:37:28 | | 1 | -1 |
| ds: | DS intensity too low ( 68/cy), skipping. | 2 | 99 | B05320.014 | TORON | #014 | 12:47:11 | | 1 | -1 |
| re: | Illegal command (re) in schedule to3mk2um, ignoring | 1 | 99 | B05320.015 | TORON | #015 | 05:33:48 | | 1 | -1 |
| az: | Azimuth discrepancy = -75 | 1 | 99 | B05320.015 | TORON | #015 | 05:33:51 | -75 | -30 | 30 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B05320.083 | TORON | #083 | 05:34:18 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B05320.190 | TORON | #190 | 05:35:58 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B05320.195 | TORON | #195 | 05:35:35 | | 1 | -1 |