| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2020 050 04 35 02 Reset Warm -> Tepid from 2020 050 04 34 56 until 2020 050 04 34 56 . Counts: 1,0 | 1 | 3 | B05120.194 | ALERT | #194 | 04:28:15 | | 1 | -1 |
| re: | Azimuth discrepancy = -174 | 1 | 99 | B05120.194 | ALERT | #194 | 04:37:22 | -174 | -30 | 30 |
| ds: | DS intensity too high ( 209045/cy) quitting. | 1 | 99 | B05120.021 | AMUND | #021 | 07:59:48 | | 1 | -1 |
| ds: | Will do AZ for SPO | 1 | 99 | B05120.021 | AMUND | #021 | 14:55:38 | SPO | 1 | -1 |
| ds: | DS intensity too low ( 1/cy), skipping. | 4 | 99 | B05120.145 | CARE | #145 | 12:09:45 | | 1 | -1 |
| zs: | ZS intensity too low ( 313/cy), skipping. | 1 | 99 | B05120.145 | CARE | #145 | 12:10:00 | | 1 | -1 |
| ds: | DS intensity too high ( 428826/cy) quitting. | 2 | 99 | B05120.145 | CARE | #145 | 16:54:21 | | 1 | -1 |
| ds: | DS intensity too low ( 85/cy), skipping. | 2 | 99 | B05120.187 | CARE | #187 | 12:56:19 | | 1 | -1 |
| ds: | DS intensity too high ( 384419/cy) quitting. | 1 | 99 | B05120.187 | CARE | #187 | 18:35:49 | | 1 | -1 |
| rl: | 2020 050 05 42 53 Reset Warm -> Tepid from 2020 050 05 42 47 until 2020 050 05 42 48 . Counts: 1,0 | 1 | 3 | B05120.191 | CARE | #191 | 05:39:33 | | 1 | -1 |
| rl: | 2020 050 22 25 08 Reset No -> Tepid from 2020 049 19 09 57 until 1993 049 22 25 02 . Counts: 1,0 | 1 | 3 | B05120.203 | CHURC | #203 | 06:38:26 | | 1 | -1 |
| rl: | 2020 050 22 25 09 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B05120.203 | CHURC | #203 | 06:38:28 | | 1 | -1 |
| rl: | 2020 050 22 33 52 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.693947 Volts. | 4 | 3 | B05120.203 | CHURC | #203 | 06:38:30 | | 1 | -1 |
| uv: | HOME key pressed | 2 | 99 | B05120.203 | CHURC | #203 | 10:34:04 | | 1 | -1 |
| fr: | Micrometer #1 reference found at step 9592 (+CAL)= 10594 Now set to o3 offset = 7844 | 1 | 99 | B05120.203 | CHURC | #203 | 10:40:04 | 10594 | 1000 | 9000 |
| mf: | Illegal command (mf) in schedule ecsc, ignoring | 2 | 99 | B05120.203 | CHURC | #203 | 11:16:31 | | 1 | -1 |
| zs: | ZS intensity too low ( 132/cy), skipping. | 1 | 99 | B05120.203 | CHURC | #203 | 23:32:28 | | 1 | -1 |
| rl: | 2020 051 19 10 02 Reset Tepid -> Tepid from 2020 051 18 57 29 until 2020 051 19 09 56 . Counts: 1,0 | 1 | 3 | B05120.239 | CHURC | #239 | 06:35:41 | | 1 | -1 |
| rl: | 2020 051 19 10 02 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B05120.239 | CHURC | #239 | 06:35:42 | | 1 | -1 |
| rl: | 2020 051 19 10 03 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B05120.239 | CHURC | #239 | 06:35:43 | | 1 | -1 |
| rl: | 2020 051 19 38 54 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 4 | 3 | B05120.239 | CHURC | #239 | 06:35:45 | | 1 | -1 |
| rl: | 2020 051 19 38 54 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 4 | 3 | B05120.239 | CHURC | #239 | 06:35:45 | | 1 | -1 |
| mm: | HOME key pressed | 3 | 99 | B05120.239 | CHURC | #239 | 16:24:36 | | 1 | -1 |
| rl: | 2020 050 06 06 46 Reset Warm -> Tepid from 2020 050 06 06 40 until 2020 050 06 06 41 . Counts: 1,0 | 1 | 3 | B05120.192 | EUREK | #192 | 06:02:34 | | 1 | -1 |
| rl: | 2020 050 06 11 05 Reset Warm -> Tepid from 2020 050 06 10 59 until 2020 050 06 11 00 . Counts: 1,0 | 1 | 3 | B05120.223 | EUREK | #223 | 06:04:45 | | 1 | -1 |
| rl: | 2020 050 06 29 06 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 4 | 3 | B05120.223 | EUREK | #223 | 06:04:52 | | 1 | -1 |
| rl: | 2020 050 06 29 06 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 4 | 3 | B05120.223 | EUREK | #223 | 06:04:52 | | 1 | -1 |
| cfg_out: | Illegal command (cfg | 1 | 99 | B05120.223 | EUREK | #223 | 06:05:06 | | 1 | -1 |
| zs: | ZS intensity too low ( 38/cy), skipping. | 4 | 99 | B05120.018 | GOOSE | #018 | 11:06:01 | | 1 | -1 |
| ds: | DS intensity too low ( 140/cy), skipping. | 3 | 99 | B05120.009 | MAUNA | #009 | 04:04:28 | | 1 | -1 |
| zs: | ZS intensity too low ( 364/cy), skipping. | 3 | 99 | B05120.009 | MAUNA | #009 | 04:09:43 | | 1 | -1 |
| ds: | DS intensity too low ( 47/cy), skipping. | 2 | 99 | B05120.119 | MAUNA | #119 | 04:09:10 | | 1 | -1 |
| ux: | UV extended scan finished, incident DUV = 487.3262 mW/m^2 | 1 | 99 | B05120.119 | MAUNA | #119 | 23:52:48 | 487.3262 | -1 | 450 |
| rl: | 2020 051 08 54 27 Checksum bad in low level command. | 1 | 3 | B05120.205 | RESOL | #205 | 06:37:04 | | 1 | -1 |
| rl: | 2020 051 08 54 28 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B05120.205 | RESOL | #205 | 06:37:06 | | 1 | -1 |
| rl: | 2020 051 08 54 28 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B05120.205 | RESOL | #205 | 06:37:08 | | 1 | -1 |
| rl: | 2020 051 16 07 16 Bad command string. Command string buffer cleared. | 1 | 3 | B05120.205 | RESOL | #205 | 06:37:23 | | 1 | -1 |
| rl: | 2020 051 16 07 16 Bad command string. Command string buffer cleared. | 1 | 3 | B05120.205 | RESOL | #205 | 06:37:23 | | 1 | -1 |
| ab_sk: | HOME key pressed | 1 | 99 | B05120.205 | RESOL | #205 | 16:07:41 | | 1 | -1 |
| rl: | 2020 050 06 42 14 Reset Warm -> Tepid from 2020 050 06 42 09 until 2020 050 06 42 09 . Counts: 1,0 | 1 | 3 | B05120.235 | RESOL | #235 | 06:40:38 | | 1 | -1 |
| rl: | 2020 050 07 01 24 New value set for watermark LOOP.RUN.TIME: 714.000034 millisec. | 1 | 3 | B05120.235 | RESOL | #235 | 06:40:40 | | 1 | -1 |
| rl: | 2020 050 07 01 24 New value set for watermark LOOP.RUN.TIME: 714.000034 millisec. | 1 | 3 | B05120.235 | RESOL | #235 | 06:40:40 | | 1 | -1 |
| rl: | 2020 051 16 43 26 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec. | 2 | 3 | B05120.235 | RESOL | #235 | 06:40:42 | | 1 | -1 |
| rl: | 2020 051 16 43 26 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec. | 2 | 3 | B05120.235 | RESOL | #235 | 06:40:42 | | 1 | -1 |
| rl: | 2020 050 08 33 54 Reset Warm -> Tepid from 2020 050 08 33 49 until 2020 050 08 33 49 . Counts: 1,0 | 1 | 3 | B05120.206 | SATUR | #206 | 08:30:35 | | 1 | -1 |
| zs: | ZS intensity too low ( 83/cy), skipping. | 2 | 99 | B05120.206 | SATUR | #206 | 15:11:11 | | 1 | -1 |
| ds: | DS intensity too low ( 249/cy), skipping. | 3 | 99 | B05120.055 | STONY | #055 | 15:04:25 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B05120.055 | STONY | #055 | 19:49:15 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B05120.055 | STONY | #055 | 19:49:19 | | 1 | -1 |
| si: | New SI, HC = 22, NC = 920 Old = 22 , 920 | 1 | 99 | B05120.055 | STONY | #055 | 19:52:07 | | 1 | -1 |
| re: | Illegal command (re) in schedule s60mk2nv, ignoring | 1 | 99 | B05120.008 | TORON | #008 | 05:34:17 | | 1 | -1 |
| ds: | DS intensity too high ( 223522/cy) quitting. | 2 | 99 | B05120.008 | TORON | #008 | 18:09:54 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B05120.008 | TORON | #008 | 18:18:26 | | 1 | -1 |
| re: | Illegal command (re) in schedule s60mk2, ignoring | 1 | 99 | B05120.014 | TORON | #014 | 05:42:27 | | 1 | -1 |
| re: | Azimuth discrepancy = -2649 | 1 | 99 | B05120.014 | TORON | #014 | 10:28:13 | -2649 | -30 | 30 |
| ds: | DS intensity too high ( 217272/cy) quitting. | 3 | 99 | B05120.014 | TORON | #014 | 15:12:17 | | 1 | -1 |
| zs: | ZS intensity too low ( 468/cy), skipping. | 2 | 99 | B05120.014 | TORON | #014 | 22:16:55 | | 1 | -1 |
| re: | Illegal command (re) in schedule to3mk2um, ignoring | 1 | 99 | B05120.015 | TORON | #015 | 05:34:08 | | 1 | -1 |
| az: | Azimuth discrepancy = -38 | 1 | 99 | B05120.015 | TORON | #015 | 05:34:11 | -38 | -30 | 30 |
| ds: | DS intensity too high ( 268164/cy) quitting. | 1 | 99 | B05120.015 | TORON | #015 | 17:35:46 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 3 | 5 | B05120.015 | TORON | #015 | 17:57:36 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B05120.083 | TORON | #083 | 05:37:51 | | 1 | -1 |
| re: | Azimuth discrepancy = -1335 | 1 | 99 | B05120.083 | TORON | #083 | 12:02:34 | -1335 | -30 | 30 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B05120.190 | TORON | #190 | 05:37:40 | | 1 | -1 |
| zs: | ZS intensity too low ( 85/cy), skipping. | 3 | 99 | B05120.190 | TORON | #190 | 12:10:56 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 3 | 5 | B05120.190 | TORON | #190 | 17:31:46 | | 1 | -1 |
| ds: | DS intensity too high ( 269151/cy) quitting. | 3 | 99 | B05120.190 | TORON | #190 | 18:11:14 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B05120.195 | TORON | #195 | 05:37:35 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B05120.195 | TORON | #195 | 18:09:40 | | 1 | -1 |
| re: | Zenith discrepancy = -496 | 1 | 99 | B05120.224 | TORON | #224 | 17:10:53 | -496 | -10 | 10 |
| re: | Azimuth discrepancy = 3812 | 1 | 99 | B05120.224 | TORON | #224 | 17:10:56 | 3812 | -30 | 30 |