| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2019 356 04 14 54 Reset Warm -> Tepid from 2019 356 04 14 49 until 2019 356 04 14 49 . Counts: 1,0 | 1 | 3 | B35719.194 | ALERT | #194 | 04:13:51 | | 1 | -1 |
| sr: | Azimuth Steps per revolution measured = 14593 | 1 | 99 | B35719.194 | ALERT | #194 | 05:04:58 | 14593 | 14600 | 14750 |
| sr: | Updating SR constant from 14593 to 14593 | 1 | 99 | B35719.194 | ALERT | #194 | 05:04:59 | 14593 | 14600 | 14800 |
| ds: | DS intensity too high ( 344591/cy) quitting. | 4 | 99 | B35719.021 | AMUND | #021 | 07:44:24 | | 1 | -1 |
| ds: | Will do AZ for SPO | 1 | 99 | B35719.021 | AMUND | #021 | 14:40:53 | SPO | 1 | -1 |
| ds: | DS intensity too high ( 239318/cy) quitting. | 1 | 99 | B35719.145 | CARE | #145 | 16:12:47 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 4 | 5 | B35719.145 | CARE | #145 | 16:23:11 | | 1 | -1 |
| ds: | DS intensity too low ( 66/cy), skipping. | 3 | 99 | B35719.187 | CARE | #187 | 13:42:31 | | 1 | -1 |
| rl: | 2019 356 05 29 17 Reset Warm -> Tepid from 2019 356 05 29 11 until 2019 356 05 29 12 . Counts: 1,0 | 1 | 3 | B35719.191 | CARE | #191 | 05:23:42 | | 1 | -1 |
| rl: | 2019 357 18 27 06 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.242296 Volts. | 4 | 3 | B35719.191 | CARE | #191 | 05:24:43 | | 1 | -1 |
| ds: | DS intensity too high ( 237181/cy) quitting. | 1 | 99 | B35719.191 | CARE | #191 | 16:12:32 | | 1 | -1 |
| rl: | 2019 356 06 21 06 Reset Warm -> Tepid from 2019 356 06 21 00 until 2019 356 06 21 01 . Counts: 1,0 | 1 | 3 | B35719.239 | CHURC | #239 | 06:19:38 | | 1 | -1 |
| rl: | 2019 356 06 21 07 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B35719.239 | CHURC | #239 | 06:19:40 | | 1 | -1 |
| rl: | 2019 356 06 37 47 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 3 | 3 | B35719.239 | CHURC | #239 | 06:19:41 | | 1 | -1 |
| rl: | 2019 356 06 37 47 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 3 | 3 | B35719.239 | CHURC | #239 | 06:19:41 | | 1 | -1 |
| rl: | 2019 357 18 56 12 New value set for watermark LOOP.RUN.TIME: 719.999981 millisec. | 1 | 3 | B35719.239 | CHURC | #239 | 06:19:45 | | 1 | -1 |
| rl: | 2019 357 18 56 12 New value set for watermark LOOP.RUN.TIME: 719.999981 millisec. | 1 | 3 | B35719.239 | CHURC | #239 | 06:19:45 | | 1 | -1 |
| rl: | 2019 356 05 50 03 Reset Warm -> Tepid from 2019 356 05 49 57 until 2019 356 05 49 58 . Counts: 1,0 | 1 | 3 | B35719.192 | EUREK | #192 | 05:48:31 | | 1 | -1 |
| rl: | 2019 357 06 52 53 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.672440 Volts. | 2 | 3 | B35719.192 | EUREK | #192 | 05:48:45 | | 1 | -1 |
| rl: | 2019 356 05 56 17 Reset Warm -> Tepid from 2019 356 05 56 11 until 2019 356 05 56 12 . Counts: 1,0 | 1 | 3 | B35719.223 | EUREK | #223 | 05:49:21 | | 1 | -1 |
| rl: | 2019 357 12 32 25 New value set for watermark LOOP.RUN.TIME: 715.000010 millisec. | 1 | 3 | B35719.223 | EUREK | #223 | 05:49:41 | | 1 | -1 |
| rl: | 2019 357 12 32 25 New value set for watermark LOOP.RUN.TIME: 715.000010 millisec. | 1 | 3 | B35719.223 | EUREK | #223 | 05:49:41 | | 1 | -1 |
| cfg_out: | Illegal command (cfg | 1 | 99 | B35719.223 | EUREK | #223 | 05:49:49 | | 1 | -1 |
| ds: | DS intensity too low ( 1/cy), skipping. | 3 | 99 | B35719.018 | GOOSE | #018 | 12:10:51 | | 1 | -1 |
| zs: | ZS intensity too low ( 59/cy), skipping. | 4 | 99 | B35719.018 | GOOSE | #018 | 12:11:07 | | 1 | -1 |
| zs: | HOME key pressed | 1 | 99 | B35719.018 | GOOSE | #018 | 12:35:23 | | 1 | -1 |
| zs: | ZS measurement terminated | 1 | 5 | B35719.018 | GOOSE | #018 | 12:35:26 | | 1 | -1 |
| zs: | Going to menu | 1 | 99 | B35719.018 | GOOSE | #018 | 12:35:27 | | 1 | -1 |
| si: | New SI, HC = -1, NC = -570 Old = -1 , -570 | 1 | 99 | B35719.018 | GOOSE | #018 | 12:43:46 | | 1 | -1 |
| rl: | 2019 356 04 13 59 Reset Warm -> Tepid from 2019 356 04 13 53 until 2019 356 04 13 54 . Counts: 1,0 | 1 | 3 | B35719.204 | GOOSE | #204 | 04:04:58 | | 1 | -1 |
| rl: | 2019 357 12 37 02 Reset Warm -> Warm from 2019 357 12 36 58 until 2019 357 12 36 59 . Counts: 0,1 | 1 | 3 | B35719.204 | GOOSE | #204 | 04:05:01 | | 1 | -1 |
| zs: | ZS intensity too low ( 93/cy), skipping. | 3 | 99 | B35719.204 | GOOSE | #204 | 12:13:26 | | 1 | -1 |
| ux: | HOME key pressed | 2 | 99 | B35719.204 | GOOSE | #204 | 12:35:18 | | 1 | -1 |
| ux: | UV extended scan aborted | 1 | 3 | B35719.204 | GOOSE | #204 | 12:35:19 | | 1 | -1 |
| si: | New SI, HC = 13, NC = -395 Old = 13 , -395 | 1 | 99 | B35719.204 | GOOSE | #204 | 12:42:26 | | 1 | -1 |
| ds: | DS intensity too high ( 242268/cy) quitting. | 1 | 99 | B35719.009 | MAUNA | #009 | 18:31:54 | | 1 | -1 |
| ds: | DS intensity too low ( 5/cy), skipping. | 1 | 99 | B35719.119 | MAUNA | #119 | 03:39:18 | | 1 | -1 |
| rl: | 2019 356 06 27 24 Reset Warm -> Tepid from 2019 356 06 27 18 until 2019 356 06 27 19 . Counts: 1,0 | 1 | 3 | B35719.205 | RESOL | #205 | 06:24:16 | | 1 | -1 |
| rl: | 2019 356 06 24 23 Reset Warm -> Tepid from 2019 356 06 24 17 until 2019 356 06 24 18 . Counts: 1,0 | 1 | 3 | B35719.235 | RESOL | #235 | 06:20:26 | | 1 | -1 |
| rl: | 2019 356 06 41 55 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 3 | 3 | B35719.235 | RESOL | #235 | 06:20:28 | | 1 | -1 |
| rl: | 2019 356 06 41 55 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 3 | 3 | B35719.235 | RESOL | #235 | 06:20:28 | | 1 | -1 |
| rl: | 2019 356 08 21 39 Reset Warm -> Tepid from 2019 356 08 21 34 until 2019 356 08 21 34 . Counts: 1,0 | 1 | 3 | B35719.206 | SATUR | #206 | 08:17:20 | | 1 | -1 |
| ds: | DS intensity too low ( 97/cy), skipping. | 2 | 99 | B35719.055 | STONY | #055 | 16:04:25 | | 1 | -1 |
| zs: | ZS intensity too low ( 180/cy), skipping. | 2 | 99 | B35719.055 | STONY | #055 | 16:04:41 | | 1 | -1 |
| re: | Illegal command (re) in schedule s60mk2nv, ignoring | 1 | 99 | B35719.008 | TORON | #008 | 05:24:38 | | 1 | -1 |
| ds: | DS intensity too low ( 182/cy), skipping. | 3 | 99 | B35719.008 | TORON | #008 | 13:32:21 | | 1 | -1 |
| re: | Illegal command (re) in schedule S60MK2, ignoring | 1 | 99 | B35719.014 | TORON | #014 | 05:27:21 | | 1 | -1 |
| ds: | DS intensity too low ( 119/cy), skipping. | 4 | 99 | B35719.014 | TORON | #014 | 13:33:38 | | 1 | -1 |
| sr: | Azimuth discrepancy = 31 | 1 | 99 | B35719.015 | TORON | #015 | 05:51:30 | 31 | -30 | 30 |
| ds: | HOME key pressed | 1 | 99 | B35719.015 | TORON | #015 | 18:58:02 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B35719.015 | TORON | #015 | 18:58:04 | | 1 | -1 |
| re: | Illegal command (re) in schedule calo3, ignoring | 1 | 99 | B35719.039 | TORON | #039 | 05:28:28 | | 1 | -1 |
| ds: | HOME key pressed | 2 | 99 | B35719.039 | TORON | #039 | 15:20:01 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B35719.039 | TORON | #039 | 15:20:58 | | 1 | -1 |
| rl: | 2019 357 18 35 46 Reset No -> Tepid from 2019 357 18 03 17 until 1992 357 18 35 41 . Counts: 1,0 | 1 | 3 | B35719.190 | TORON | #190 | 05:18:29 | | 1 | -1 |
| rl: | 2019 357 18 35 47 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B35719.190 | TORON | #190 | 05:18:30 | | 1 | -1 |
| ds: | DS intensity too high ( 226445/cy) quitting. | 1 | 99 | B35719.190 | TORON | #190 | 15:39:35 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B35719.190 | TORON | #190 | 17:16:57 | | 1 | -1 |
| ua: | HOME key pressed | 1 | 99 | B35719.190 | TORON | #190 | 17:59:54 | | 1 | -1 |
| ua: | Going to menu | 1 | 99 | B35719.190 | TORON | #190 | 18:00:28 | | 1 | -1 |
| si: | New SI, HC = -10, NC = 225 Old = -10 , 145 | 1 | 99 | B35719.190 | TORON | #190 | 19:07:34 | | 1 | -1 |
| rl: | 2019 356 05 29 17 Reset Warm -> Tepid from 2019 356 05 29 11 until 2019 356 05 29 11 . Counts: 1,0 | 1 | 3 | B35719.195 | TORON | #195 | 05:25:29 | | 1 | -1 |
| rl: | 2019 356 05 40 31 <M,6,242> | 1 | 3 | B35719.224 | TORON | #224 | 05:22:44 | | 1 | -1 |
| rl: | 2019 356 05 40 31 <M,6,242> | 1 | 5 | B35719.224 | TORON | #224 | 05:22:44 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B35719.224 | TORON | #224 | 05:27:49 | | 1 | -1 |