Analysing b-file records for potential instrument or data problems.

Critical warnings from b-files' comments for days between 2019192 and 2019192 (1 sec, 32 rows)

Type	Comment	count	priority	fname	location	serial	time	min	max
ds:	Suppressed oscillation of filter wheel.	7	5	B19219.019	ALERT	#019	09:31:07	1	-1
rl:	2019 191 04 25 39 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.597164 Volts.	16	3	B19219.194	ALERT	#194	04:23:48	1	-1
zs:	ZS is not done when solar zenith angle less than 30 degrees. Skipping.	14	10	B19219.145	CARE	#145	15:58:32	1	-1
ds:	Suppressed oscillation of filter wheel.	10	5	B19219.187	CARE	#187	14:41:53	1	-1
zs:	ZS is not done when solar zenith angle less than 30 degrees. Skipping.	13	10	B19219.187	CARE	#187	16:03:05	1	-1
rl:	2019 191 05 45 19 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.672440 Volts.	22	3	B19219.191	CARE	#191	05:37:56	1	-1
rl:	2019 192 15 46 16 PMT counter failure	1	1	B19219.191	CARE	#191	05:38:37	1	-1
ds:	Suppressed oscillation of filter wheel.	6	5	B19219.191	CARE	#191	14:02:36	1	-1
rl:	2019 192 12 32 57 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.699324 Volts.	6	3	B19219.203	CHURC	#203	06:28:40	1	-1
ds:	Suppressed oscillation of filter wheel.	10	5	B19219.203	CHURC	#203	17:05:55	1	-1
rl:	2019 191 06 26 16 Motor #11: appears stuck with a reference sensor activated.	1	1	B19219.239	CHURC	#239	06:23:56	1	-1
sc:	SC intensity too low ( 3/cy), skipping.	32	3	B19219.246	Delft	#246	05:40:06	1	-1
rl:	2019 192 00 26 20 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec.	9	3	B19219.246	Delft	#246	23:48:56	1	-1
rl:	2019 192 00 26 20 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec.	9	3	B19219.246	Delft	#246	23:48:56	1	-1
hg:	Lamp not on... hg test terminated F1= 0 F4= 310	1	1	B19219.018	GOOSE	#018	14:51:36	1	-1
hg:	Lamp not detected f1= 0 f4= 310	1	1	B19219.018	GOOSE	#018	14:51:37	1	-1
sc:	Suppressed oscillation of filter wheel.	6	5	B19219.009	MAUNA	#009	19:07:04	1	-1
fz:	Suppressed oscillation of filter wheel.	6	5	B19219.119	MAUNA	#119	16:22:48	1	-1
zs:	ZS is not done when solar zenith angle less than 30 degrees. Skipping.	23	10	B19219.008	TORON	#008	16:03:41	1	-1
zs:	ZS is not done when solar zenith angle less than 30 degrees. Skipping.	13	10	B19219.014	TORON	#014	15:52:59	1	-1
zs:	ZS is not done when solar zenith angle less than 30 degrees. Skipping.	6	10	B19219.015	TORON	#015	16:02:32	1	-1
ds:	Suppressed oscillation of filter wheel.	7	5	B19219.039	TORON	#039	18:37:48	1	-1
hg:	Lamp not on... hg test terminated F1= 10 F4= 8	2	1	B19219.046	TORON	#046	00:02:13	1	-1
hg:	Lamp not detected f1= 10 f4= 8	2	1	B19219.046	TORON	#046	00:02:14	1	-1
ds:	Suppressed oscillation of filter wheel.	7	5	B19219.085	TORON	#085	16:08:20	1	-1
rl:	2019 192 23 41 44 Motor #3: appears stuck with a reference sensor activated.	5	1	B19219.223	TORON	#223	05:54:31	1	-1
rl:	2019 193 00 21 23 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec.	6	3	B19219.223	TORON	#223	05:54:44	1	-1
rl:	2019 193 00 21 23 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec.	6	3	B19219.223	TORON	#223	05:54:44	1	-1
rl:	2019 192 03 25 33 PMT counter failure	1	1	B19219.223	TORON	#223	05:54:55	1	-1
rl:	2019 191 05 40 54 Motor #2: appears stuck with a reference sensor activated.	2	1	B19219.224	TORON	#224	05:33:57	1	-1
rl:	2019 191 05 57 53 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec.	8	3	B19219.224	TORON	#224	05:34:01	1	-1
rl:	2019 191 05 57 53 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec.	8	3	B19219.224	TORON	#224	05:34:01	1	-1

Instrument constant changes for the week before 2019192 (3 sec, 0 rows)

Serial	YYYYJJJ	SL Current	SL Voltage
224	2019185	-12.14	23.93
239	2019185	-12.01	24.22
224	2019186	-12.14	23.87
235	2019186	-11.88	24.25
239	2019186	-11.99	24.22
224	2019187	-12.15	23.87
235	2019187	-11.88	24.25
239	2019187	-12.01	24.22
224	2019188	-12.14	23.87
235	2019188	-11.88	24.22
239	2019188	-12.01	24.2
224	2019189	-12.13	23.87
235	2019189	-11.88	24.22
239	2019189	-12.01	24.2
224	2019190	-12.13	23.87
235	2019190	-11.88	24.22
239	2019190	-11.99	24.22
224	2019191	-12.14	23.93
235	2019191	-11.89	24.25
239	2019191	-12.01	24.2
223	2019192	-12.17	24.4
224	2019192	-12.14	24.05
235	2019192	-11.89	24.22
239	2019192	-12.01	24.2

Serial	YYYYJJJ	HG large	max correction
008	2019192	1	19.3
012	2019192	1	12.0
015	2019192	2	11.7
018	2019192	3	15.7
021	2019192	2	3.5
046	2019192	3	6.5
069	2019192	2	5.0
203	2019192	5	5.4
204	2019192	2	10.6
223	2019192	2	20.3
224	2019192	2	18.4

Non-critical warnings from b-files' comments for days between 2019192 and 2019192 (2 sec, 73 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
ds:	Suppressed oscillation of filter wheel.	3	5	B19219.029	ALERT	#029	00:44:45		1	-1
ds:	DS intensity too high ( 232190/cy) quitting.	1	99	B19219.029	ALERT	#029	15:54:21		1	-1
ds:	DS intensity too low ( 161/cy), skipping.	2	99	B19219.029	ALERT	#029	17:44:35		1	-1
ds:	DS intensity too low ( 312/cy), skipping.	1	99	B19219.194	ALERT	#194	02:51:09		1	-1
rl:	2019 191 04 24 37 Reset Warm -> Tepid from 2019 191 04 24 31 until 2019 191 04 24 32 . Counts: 1,0	1	3	B19219.194	ALERT	#194	04:23:45		1	-1
ds:	Suppressed oscillation of filter wheel.	3	5	B19219.194	ALERT	#194	18:11:44		1	-1
skc:	HOME key pressed	1	99	B19219.021	AMUND	#021	19:14:12		1	-1
skc:	Going to menu	1	99	B19219.021	AMUND	#021	19:14:13		1	-1
az:	Azimuth discrepancy = -1340	1	99	B19219.021	AMUND	#021	19:14:49	-1340	-30	30
ds:	Suppressed oscillation of filter wheel.	1	5	B19219.145	CARE	#145	17:29:59		1	-1
ds:	DS intensity too high ( 320073/cy) quitting.	4	99	B19219.187	CARE	#187	13:57:26		1	-1
rl:	2019 191 05 44 04 Reset Warm -> Tepid from 2019 191 05 43 58 until 2019 191 05 43 59 . Counts: 1,0	1	3	B19219.191	CARE	#191	05:37:54		1	-1
rl:	2019 193 00 16 33 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.339078 Volts.	1	3	B19219.191	CARE	#191	05:38:47		1	-1
re:	Azimuth discrepancy = -32	1	99	B19219.191	CARE	#191	05:45:34	-32	-30	30
rl:	2019 191 06 33 36 Reset Warm -> Tepid from 2019 191 06 33 30 until 2019 191 06 33 30 . Counts: 1,0	1	3	B19219.203	CHURC	#203	06:28:37		1	-1
ds:	DS intensity too high ( 265116/cy) quitting.	4	99	B19219.203	CHURC	#203	13:16:50		1	-1
rl:	2019 191 06 26 14 Reset Warm -> Tepid from 2019 191 06 26 08 until 2019 191 06 26 09 . Counts: 1,0	1	3	B19219.239	CHURC	#239	06:23:55		1	-1
rl:	2019 191 06 26 16 Motor #11: appears stuck with a reference sensor activated.	1	3	B19219.239	CHURC	#239	06:23:56		1	-1
rl:	2019 191 06 42 55 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	3	3	B19219.239	CHURC	#239	06:23:57		1	-1
rl:	2019 191 06 42 55 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	3	3	B19219.239	CHURC	#239	06:23:57		1	-1
ds:	Suppressed oscillation of filter wheel.	2	5	B19219.239	CHURC	#239	12:20:37		1	-1
ds:	DS intensity too high ( 202813/cy) quitting.	4	99	B19219.239	CHURC	#239	13:22:00		1	-1
ds:	Suppressed oscillation of filter wheel.	3	5	B19219.246	Delft	#246	08:58:58		1	-1
rl:	2019 192 00 00 34 Reset Warm -> Tepid from 2019 192 00 00 28 until 2019 192 00 00 28 . Counts: 1,0	1	3	B19219.246	Delft	#246	23:48:55		1	-1
rl:	2019 192 18 17 01 Bad command string. Command string buffer cleared.	1	3	B19219.246	Delft	#246	23:49:09		1	-1
rl:	2019 192 18 17 01 Bad command string. Command string buffer cleared.	1	3	B19219.246	Delft	#246	23:49:09		1	-1
rl:	2019 192 18 17 01 <>	1	3	B19219.246	Delft	#246	23:49:10		1	-1
chk_cfg:	MOTOR.MAX.JERK[10]=(symbol not found)	2	3	B19219.246	Delft	#246	23:49:19		1	-1
rl:	2019 191 05 58 41 Reset Warm -> Tepid from 2019 191 05 58 35 until 2019 191 05 58 36 . Counts: 1,0	1	3	B19219.192	EUREK	#192	05:54:06		1	-1
re:	Zenith discrepancy = -2116	1	99	B19219.018	GOOSE	#018	14:47:24	-2116	-10	10
re:	Azimuth discrepancy = -5219	1	99	B19219.018	GOOSE	#018	14:48:04	-5219	-30	30
ds:	Suppressed oscillation of filter wheel.	3	5	B19219.018	GOOSE	#018	18:17:50		1	-1
ds:	DS intensity too low ( 2/cy), skipping.	2	99	B19219.204	GOOSE	#204	07:50:58		1	-1
zs:	ZS intensity too low ( 94/cy), skipping.	3	99	B19219.204	GOOSE	#204	07:51:12		1	-1
ds:	Suppressed oscillation of filter wheel.	2	5	B19219.204	GOOSE	#204	13:02:28		1	-1
ds:	DS intensity too high ( 475979/cy) quitting.	1	99	B19219.204	GOOSE	#204	13:45:26		1	-1
zs:	ZS intensity too low ( 407/cy), skipping.	4	99	B19219.119	MAUNA	#119	05:02:05		1	-1
ds:	Suppressed oscillation of filter wheel.	2	5	B19219.031	RESOL	#031	15:27:59		1	-1
rl:	2019 191 06 43 58 Reset Warm -> Tepid from 2019 191 06 43 53 until 2019 191 06 43 53 . Counts: 1,0	1	3	B19219.205	RESOL	#205	06:33:53		1	-1
ds:	DS intensity too high ( 316825/cy) quitting.	2	99	B19219.205	RESOL	#205	13:56:31		1	-1
ds:	Suppressed oscillation of filter wheel.	3	5	B19219.205	RESOL	#205	16:21:19		1	-1
rl:	2019 191 06 33 33 Reset Warm -> Tepid from 2019 191 06 33 27 until 2019 191 06 33 27 . Counts: 1,0	1	3	B19219.235	RESOL	#235	06:30:55		1	-1
rl:	2019 191 06 51 15 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec.	4	3	B19219.235	RESOL	#235	06:30:57		1	-1
rl:	2019 191 06 51 15 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec.	4	3	B19219.235	RESOL	#235	06:30:57		1	-1
ds:	Suppressed oscillation of filter wheel.	1	5	B19219.235	RESOL	#235	15:26:52		1	-1
ds:	DS intensity too high ( 242541/cy) quitting.	1	99	B19219.235	RESOL	#235	16:13:33		1	-1
ds:	Suppressed oscillation of filter wheel.	2	5	B19219.206	SATUR	#206	00:17:48		1	-1
rl:	2019 191 08 26 25 Reset Warm -> Tepid from 2019 191 08 26 20 until 2019 191 08 26 20 . Counts: 1,0	1	3	B19219.206	SATUR	#206	08:25:22		1	-1
rl:	2019 191 07 51 48 Reset Warm -> Tepid from 2019 191 07 51 43 until 2019 191 07 51 43 . Counts: 1,0	1	3	B19219.195	STONY	#195	07:46:07		1	-1
ux:	HOME key pressed	1	99	B19219.195	STONY	#195	20:21:32		1	-1
ux:	UV extended scan aborted	1	3	B19219.195	STONY	#195	20:21:34		1	-1
ux:	Going to menu	1	99	B19219.195	STONY	#195	20:22:05		1	-1
ds:	Suppressed oscillation of filter wheel.	2	5	B19219.195	STONY	#195	21:53:19		1	-1
ds:	DS intensity too high ( 365676/cy) quitting.	3	99	B19219.008	TORON	#008	18:45:06		1	-1
ds:	DS intensity too high ( 363312/cy) quitting.	3	99	B19219.014	TORON	#014	18:45:44		1	-1
re:	Azimuth discrepancy = -63	1	99	B19219.015	TORON	#015	05:37:11	-63	-30	30
ds:	DS intensity too high ( 225290/cy) quitting.	4	99	B19219.015	TORON	#015	15:53:24		1	-1
zs:	ZS intensity too low ( 364/cy), skipping.	4	99	B19219.046	TORON	#046	00:30:31		1	-1
sc:	SC intensity too low ( 308/cy), skipping.	1	3	B19219.083	TORON	#083	18:15:08		1	-1
sc:	SC intensity too low ( 209/cy), skipping.	2	3	B19219.084	TORON	#084	18:13:24		1	-1
ds:	DS intensity too high ( 232733/cy) quitting.	4	99	B19219.085	TORON	#085	18:39:43		1	-1
si:	New SI, HC = 9, NC = -1950 Old = 9 , 590	2	99	B19219.223	TORON	#223	00:04:34		1	-1
ds:	HOME key pressed	1	99	B19219.223	TORON	#223	00:19:46		1	-1
ds:	Going to menu	1	99	B19219.223	TORON	#223	00:20:40		1	-1
ds:	DS intensity too low ( 218/cy), skipping.	1	99	B19219.223	TORON	#223	02:21:09		1	-1
rl:	2019 192 23 41 43 Reset Tepid -> Tepid from 2019 142 12 22 16 until 2019 192 23 41 38 . Counts: 1,0	1	3	B19219.223	TORON	#223	05:54:29		1	-1
rl:	2019 192 23 41 44 Motor #3: appears stuck with a reference sensor activated.	1	3	B19219.223	TORON	#223	05:54:31		1	-1
rl:	2019 192 23 41 44 Motor #11: appears stuck with a reference sensor activated.	1	3	B19219.223	TORON	#223	05:54:34		1	-1
rl:	2019 192 04 58 44 New value set for watermark LOOP.RUN.TIME: 721.000004 millisec.	1	3	B19219.223	TORON	#223	05:54:58		1	-1
rl:	2019 192 04 58 44 New value set for watermark LOOP.RUN.TIME: 721.000004 millisec.	1	3	B19219.223	TORON	#223	05:54:58		1	-1
cfg_out:	Illegal command (cfg	1	99	B19219.223	TORON	#223	05:55:05		1	-1
az:	Azimuth discrepancy = -219	2	99	B19219.223	TORON	#223	23:58:58	-219	-30	30
rl:	2019 191 05 40 01 Reset Warm -> Tepid from 2019 191 05 39 55 until 2019 191 05 39 56 . Counts: 1,0	1	3	B19219.224	TORON	#224	05:33:54		1	-1

Measurements and tests summary.

_jday	_loc	_serial	_skc	aode	ds	dt	ed	fm	fz	hg	hp	rs	sl	um	uv	zs
192	TORONTO	#008	s60mk2nv,Waiting until ZA = 92 now 88.5,Waiting until ZA = 92 now 89.8,Waiting until ZA = 92 now 91.9,Waiting until ZA = -85 now -86.2,Waiting until ZA = -85 now -87.7,Waiting until ZA = -85 now -89.1		83	3	1	19		33		3	9			94
192	MAUNA LOA OBS	#009	calsc	75	77	2	1	27	3	28		2	6		66
192	SATURNA	#012	ecsc	101	106	2	1	13	3	18		2	6		72	25
192	TORONTO	#014	S60MK2	38	38	1	1	19		24		1	5		69	66
192	TORONTO	#015	to4mk2um,Waiting until ZA = 98 now 94.5,Waiting until ZA = 98 now 96,Waiting until ZA = 98 now 97.4	53	56	1	1			45		1	12	72	76	42
192	GOOSE BAY	#018	ecsc	92	96	2	1	7	5	24		2	5		72	35
192	ALERT	#019	ecsc	169	169	1	1			16		1	6		85	20
192	AMUNDSEN-SCOTT	#021	Going to menu,HOME key pressed,idle,menu,Next schedule will be idle (now idle ZS= 0 ZS= 112.127),Next schedule will be spmoon (now spmoon ZS= 0 ZS= 112.068),The next day will run schedule idle,Waiting until end of local day.,Waiting until ZA = 0 now -112.2			1	1	1		3	4	1	1
192	ALERT	#029	ecsc	156	157	1	1			15		1	6		86	20
192	RESOLUTE	#031	ecsc	113	116	1	1			18		1	6		88	72
192	TORONTO	#038	menu
192	TORONTO	#039	calo3	153	160	2	1	18	2	24		2	6		2	34
192	TORONTO	#046	ecsc	93	95	2	1	18		21		2	5		67	26
192	EUREKA	#069	calsc	161	161	1	1			25		1	8		96	14
192	TORONTO	#083	calsc	96	101	2	1	18	6	30		2	7		33	38
192	TORONTO	#084	calsc	87	91	2	1	18	4	30		2	7		32	41
192	TORONTO	#085	ecsc	77	78	2	1	15	3	21	20	2	5		69	24
192	MAUNA LOA OBS	#119	calsc		95		1	26	5		36		6		25	4
192	CARE	#145	S60MK3		52	1	1	18		22	22	1	4	24	64	51
192	CARE	#187	S60MK3	46	48	1	1	18		22	23	1	4	24	61	53
192	CARE	#191	ecnouv	134	144	1	1	16	11	21	20	1	6			30
192	EUREKA	#192	calsc	122	122	1	1			18	18	1	7		77
192	ALERT	#194	ecsc	121	121	1	1			3	4	1	5		84	17
192	STONY PLAIN	#195	ecsc,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.625)	72	78	2	1	5	4	10	11	2	6		69	16
192	CHURCHILL	#203	ecsc	79	83	1	1		5	17	10	1	4		74	21
192	GOOSE BAY	#204	ecsc	26	26	2			5	7	5	2	2		22	10
192	RESOLUTE	#205	ecsc	78	80	1	1			8	5	1	5		72	57
192	SATURNA	#206	ecsc		71	2	1	11	2	13	11	2	5		62	22
192	TORONTO	#223	menu,Starting schedule calsc	51	51	1	1			4	3	1	2		6	1
192	TORONTO	#224	calsc		74	2	1	16	6	31	29	2	5		30	20
192	RESOLUTE	#235	ecsc	71	71	1	1			5	5	1	5		73	64
192	CHURCHILL	#239	ecsc	86	89	2	1		7	11	11	1	4		79	22
192	DelftKZ	#246	scmk3		135	3	1			33	32	3	12			13

(2 sec)

Operator	Serial
Time	008
(CUT)	008
(HH:MM)	008
Time	009
(CUT)	009
(HH:MM)	009
Time	011
(CUT)	011
(HH:MM)	011
Time	012
(CUT)	012
(HH:MM)	012
Time	013
(CUT)	013
Time	014
(CUT)	014
(HH:MM)	014
Time	015
(CUT)	015
(HH:MM)	015
Time	017
(CUT)	017
(HH:MM)	017
Time	018
(CUT)	018
(HH:MM)	018
Time	019
(CUT)	019
(CUT)	021
(HH:MM)	021
Time	026
(CUT)	026
(HH:MM)	026
Time	029
(CUT)	029
Time	031
(CUT)	031
Time	046
(CUT)	046
(HH:MM)	046
(CUT)	055
(HH:MM)	055
(CUT)	069
(HH:MM)	069
(CUT)	084
(HH:MM)	084
Time	085
(CUT)	085
(HH:MM)	085
Time	119
(CUT)	119
(HH:MM)	119
Time	145
(CUT)	145
(HH:MM)	145
Time	187
(CUT)	187
(HH:MM)	187
Time	191
(CUT)	191
(HH:MM)	191
Time	194
(CUT)	194
(HH:MM)	194
Time	195
(CUT)	195
(HH:MM)	195
Time	203
(CUT)	203
(HH:MM)	203
Time	204
(CUT)	204
(HH:MM)	204
Time	205
(CUT)	205
(HH:MM)	205
Time	206
(CUT)	206
(HH:MM)	206
Time	235
(CUT)	235
(HH:MM)	235
Time	239
(CUT)	239
(HH:MM)	239

Database last updated on Thu, 10 Sep 2026 06:11:02 +0000 by localhost

Critical warnings from b-files' comments for days between 2019192 and 2019192 (1 sec, 32 rows)

Instrument constant changes for the week before 2019192 (3 sec, 0 rows)

SL burned out? (AP results when SL is ON) (0 sec, 24 rows)

Hg with step corrections larger than 10 steps or multiple corrections larger than 2.5 steps (0 sec, 11 rows)

Non-critical warnings from b-files' comments for days between 2019192 and 2019192 (2 sec, 73 rows)

Measurements and tests summary.

New operators? (0 sec, 85 rows)

Relative and absolute humidity for day 2019192 (2 sec, 26 rows)