| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| ds: | DS intensity too high ( 253422/cy) quitting. | 1 | 99 | B18919.029 | ALERT | #029 | 15:53:37 | | 1 | -1 |
| ds: | DS intensity too low ( 165/cy), skipping. | 1 | 99 | B18919.029 | ALERT | #029 | 17:44:39 | | 1 | -1 |
| rl: | 2019 188 04 28 58 Reset Warm -> Tepid from 2019 188 04 28 52 until 2019 188 04 28 53 . Counts: 1,0 | 1 | 3 | B18919.194 | ALERT | #194 | 04:20:11 | | 1 | -1 |
| sr: | Azimuth Steps per revolution measured = 14596 | 1 | 99 | B18919.194 | ALERT | #194 | 05:18:53 | 14596 | 14600 | 14750 |
| sr: | Updating SR constant from 14595 to 14596 | 1 | 99 | B18919.194 | ALERT | #194 | 05:18:54 | 14596 | 14600 | 14800 |
| ds: | DS intensity too low ( 253/cy), skipping. | 1 | 99 | B18919.194 | ALERT | #194 | 14:19:09 | | 1 | -1 |
| ds: | DS intensity too low ( 147/cy), skipping. | 2 | 99 | B18919.145 | CARE | #145 | 10:29:17 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 3 | 5 | B18919.187 | CARE | #187 | 16:03:33 | | 1 | -1 |
| ds: | DS intensity too low ( 454/cy), skipping. | 2 | 99 | B18919.187 | CARE | #187 | 23:53:13 | | 1 | -1 |
| rl: | 2019 183 05 38 07 Reset Warm -> Tepid from 2019 183 05 38 01 until 2019 183 05 38 02 . Counts: 1,0 | 1 | 3 | B18919.191 | CARE | #191 | 05:29:56 | | 1 | -1 |
| rl: | 2019 189 13 26 49 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.021847 Volts. | 1 | 3 | B18919.191 | CARE | #191 | 05:31:32 | | 1 | -1 |
| rl: | 2019 188 06 28 47 Reset Warm -> Tepid from 2019 188 06 28 41 until 2019 188 06 28 42 . Counts: 1,0 | 1 | 3 | B18919.203 | CHURC | #203 | 06:27:10 | | 1 | -1 |
| rl: | 2019 189 23 31 57 New value set for watermark SUPPLY.VOLTAGE.HIGH[-12V]: -10.973561 Volts. | 2 | 3 | B18919.203 | CHURC | #203 | 06:27:12 | | 1 | -1 |
| ds: | DS intensity too high ( 380992/cy) quitting. | 1 | 99 | B18919.203 | CHURC | #203 | 13:47:02 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B18919.203 | CHURC | #203 | 15:44:32 | | 1 | -1 |
| rl: | 2019 188 06 24 05 Reset Warm -> Tepid from 2019 188 06 23 59 until 2019 188 06 24 00 . Counts: 1,0 | 1 | 3 | B18919.239 | CHURC | #239 | 06:24:50 | | 1 | -1 |
| rl: | 2019 188 06 24 06 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B18919.239 | CHURC | #239 | 06:24:51 | | 1 | -1 |
| rl: | 2019 188 06 40 46 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 3 | 3 | B18919.239 | CHURC | #239 | 06:24:53 | | 1 | -1 |
| rl: | 2019 188 06 40 46 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 3 | 3 | B18919.239 | CHURC | #239 | 06:24:53 | | 1 | -1 |
| ds: | DS intensity too high ( 358198/cy) quitting. | 3 | 99 | B18919.239 | CHURC | #239 | 13:56:44 | | 1 | -1 |
| sc: | HOME key pressed | 2 | 99 | B18919.246 | Delft | #246 | 07:13:29 | | 1 | -1 |
| sc: | Going to menu | 1 | 99 | B18919.246 | Delft | #246 | 07:13:53 | | 1 | -1 |
| rl: | 2019 189 00 00 00 Reset Warm -> Tepid from 2019 188 23 59 54 until 2019 188 23 59 54 . Counts: 1,0 | 1 | 3 | B18919.246 | Delft | #246 | 23:48:27 | | 1 | -1 |
| rl: | 2019 189 00 19 12 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 4 | 3 | B18919.246 | Delft | #246 | 23:48:29 | | 1 | -1 |
| rl: | 2019 189 00 19 12 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 4 | 3 | B18919.246 | Delft | #246 | 23:48:29 | | 1 | -1 |
| chk_cfg: | MOTOR.MAX.JERK[10]=(symbol not found) | 2 | 3 | B18919.246 | Delft | #246 | 23:48:42 | | 1 | -1 |
| sc: | SC intensity too low ( 109/cy), skipping. | 4 | 3 | B18919.069 | EUREK | #069 | 10:35:04 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B18919.069 | EUREK | #069 | 18:34:09 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B18919.069 | EUREK | #069 | 18:34:13 | | 1 | -1 |
| rl: | 2019 188 06 03 27 Reset Warm -> Tepid from 2019 188 06 03 22 until 2019 188 06 03 22 . Counts: 1,0 | 1 | 3 | B18919.192 | EUREK | #192 | 05:57:09 | | 1 | -1 |
| sc: | SC intensity too low ( 224/cy), skipping. | 2 | 3 | B18919.192 | EUREK | #192 | 10:34:33 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B18919.192 | EUREK | #192 | 18:33:38 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B18919.192 | EUREK | #192 | 18:33:42 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B18919.192 | EUREK | #192 | 20:51:31 | | 1 | -1 |
| re: | Azimuth discrepancy = -53 | 1 | 99 | B18919.018 | GOOSE | #018 | 04:23:16 | -53 | -30 | 30 |
| rl: | 2019 188 04 18 33 Reset Warm -> Tepid from 2019 188 04 18 28 until 2019 188 04 18 28 . Counts: 1,0 | 1 | 3 | B18919.204 | GOOSE | #204 | 04:14:17 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B18919.009 | MAUNA | #009 | 23:37:43 | | 1 | -1 |
| zs: | ZS intensity too low ( 70/cy), skipping. | 3 | 99 | B18919.119 | MAUNA | #119 | 05:16:48 | | 1 | -1 |
| sc: | Suppressed oscillation of filter wheel. | 1 | 5 | B18919.031 | RESOL | #031 | 00:41:49 | | 1 | -1 |
| w1: | HOME key pressed | 4 | 99 | B18919.031 | RESOL | #031 | 13:42:12 | | 1 | -1 |
| w1: | Going to menu | 4 | 99 | B18919.031 | RESOL | #031 | 13:42:12 | | 1 | -1 |
| re: | Azimuth discrepancy = -555 | 1 | 99 | B18919.031 | RESOL | #031 | 14:42:30 | -555 | -30 | 30 |
| si: | New SI, HC = 6, NC = 246 Old = 6 , 171 | 2 | 99 | B18919.031 | RESOL | #031 | 15:03:28 | | 1 | -1 |
| sc: | SC intensity too low ( 422/cy), skipping. | 2 | 3 | B18919.031 | RESOL | #031 | 15:07:29 | | 1 | -1 |
| ds: | DS intensity too high ( 205381/cy) quitting. | 1 | 99 | B18919.031 | RESOL | #031 | 21:58:22 | | 1 | -1 |
| sc: | SC intensity too low ( 1/cy), skipping. | 2 | 3 | B18919.205 | RESOL | #205 | 00:09:20 | | 1 | -1 |
| rl: | 2019 190 00 23 39 Reset No -> Tepid from 2019 190 00 22 12 until 2057 153 17 55 18 . Counts: 1,0 | 1 | 3 | B18919.205 | RESOL | #205 | 06:28:39 | | 1 | -1 |
| rl: | 2019 190 00 23 40 New value set for watermark MOISTURE.HIGH: 20.372398 . | 1 | 3 | B18919.205 | RESOL | #205 | 06:28:41 | | 1 | -1 |
| rl: | 2019 190 00 23 40 Checksum bad in low level command. | 1 | 3 | B18919.205 | RESOL | #205 | 06:28:43 | | 1 | -1 |
| rl: | 2019 190 00 23 40 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B18919.205 | RESOL | #205 | 06:28:46 | | 1 | -1 |
| rl: | 2019 190 00 23 40 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B18919.205 | RESOL | #205 | 06:28:48 | | 1 | -1 |
| dsp: | Doing dispersion test with Hg (UV port) | 4 | 99 | B18919.205 | RESOL | #205 | 14:32:44 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 1 | 1 | 99 | B18919.205 | RESOL | #205 | 15:19:03 | | 1 | -1 |
| ez: | Illegal command (ez) in schedule , ignoring | 2 | 99 | B18919.205 | RESOL | #205 | 15:51:52 | | 1 | -1 |
| da_lo: | DEL key pressed | 2 | 99 | B18919.205 | RESOL | #205 | 22:23:45 | | 1 | -1 |
| az: | Azimuth discrepancy = 16000 | 4 | 99 | B18919.205 | RESOL | #205 | 22:30:00 | 16000 | -30 | 30 |
| si: | New SI, HC = 21, NC = 570 Old = 23 , 550 | 1 | 99 | B18919.205 | RESOL | #205 | 22:55:11 | | 1 | -1 |
| ds: | DS intensity too high ( 200604/cy) quitting. | 1 | 99 | B18919.205 | RESOL | #205 | 23:55:39 | | 1 | -1 |
| hg: | HOME key pressed | 2 | 99 | B18919.235 | RESOL | #235 | 00:04:00 | | 1 | -1 |
| hg: | Going to menu | 2 | 99 | B18919.235 | RESOL | #235 | 00:04:02 | | 1 | -1 |
| rl: | 2019 188 06 35 16 Reset Warm -> Tepid from 2019 188 06 35 10 until 2019 188 06 35 11 . Counts: 1,0 | 1 | 3 | B18919.235 | RESOL | #235 | 06:31:02 | | 1 | -1 |
| rl: | 2019 189 07 37 06 New value set for watermark LOOP.RUN.TIME: 703.000021 millisec. | 2 | 3 | B18919.235 | RESOL | #235 | 06:31:18 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B18919.235 | RESOL | #235 | 19:30:31 | | 1 | -1 |
| ds: | DS intensity too high ( 215993/cy) quitting. | 3 | 99 | B18919.235 | RESOL | #235 | 20:48:29 | | 1 | -1 |
| ds: | DS intensity too high ( 215180/cy) quitting. | 4 | 99 | B18919.012 | SATUR | #012 | 16:45:48 | | 1 | -1 |
| rl: | 2019 188 08 27 40 Reset Warm -> Tepid from 2019 188 08 27 35 until 2019 188 08 27 35 . Counts: 1,0 | 1 | 3 | B18919.206 | SATUR | #206 | 08:23:44 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B18919.206 | SATUR | #206 | 17:56:09 | | 1 | -1 |
| rl: | 2019 188 07 49 10 Reset Warm -> Tepid from 2019 188 07 49 04 until 2019 188 07 49 05 . Counts: 1,0 | 1 | 3 | B18919.195 | STONY | #195 | 07:48:29 | | 1 | -1 |
| zs: | ZS intensity too low ( 432/cy), skipping. | 1 | 99 | B18919.008 | TORON | #008 | 00:25:20 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 4 | 10 | B18919.008 | TORON | #008 | 18:50:00 | | 1 | -1 |
| zs: | ZS intensity too low ( 490/cy), skipping. | 2 | 99 | B18919.014 | TORON | #014 | 00:20:03 | | 1 | -1 |
| re: | Azimuth discrepancy = 33 | 2 | 99 | B18919.015 | TORON | #015 | 05:37:38 | 33 | -30 | 30 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 1 | 10 | B18919.039 | TORON | #039 | 15:55:10 | | 1 | -1 |
| re: | Azimuth discrepancy = 48 | 1 | 99 | B18919.046 | TORON | #046 | 05:40:31 | 48 | -30 | 30 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B18919.046 | TORON | #046 | 20:42:59 | | 1 | -1 |
| rl: | 2019 188 05 36 04 Reset Warm -> Tepid from 2019 188 05 35 59 until 2019 188 05 35 59 . Counts: 1,0 | 1 | 3 | B18919.224 | TORON | #224 | 05:32:04 | | 1 | -1 |
| rl: | 2019 188 05 54 03 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 3 | 3 | B18919.224 | TORON | #224 | 05:32:11 | | 1 | -1 |
| rl: | 2019 188 05 54 03 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 3 | 3 | B18919.224 | TORON | #224 | 05:32:11 | | 1 | -1 |
| rl: | 2019 189 13 55 18 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec. | 2 | 3 | B18919.224 | TORON | #224 | 05:32:21 | | 1 | -1 |
| rl: | 2019 189 13 55 18 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec. | 2 | 3 | B18919.224 | TORON | #224 | 05:32:21 | | 1 | -1 |