Analysing b-file records for potential instrument or data problems.

Critical warnings from b-files' comments for days between 2019104 and 2019104 (2 sec, 25 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
ds:	Suppressed oscillation of filter wheel.	9	5	B10419.029	ALERT	#029	15:31:56		1	-1
rl:	2019 103 05 40 16 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.683193 Volts.	16	3	B10419.191	CARE	#191	05:33:53		1	-1
ds:	Suppressed oscillation of filter wheel.	11	5	B10419.203	CHURC	#203	13:31:12		1	-1
rl:	2019 104 14 22 37 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.699324 Volts.	8	3	B10419.192	EUREK	#192	05:47:46		1	-1
ds:	Suppressed oscillation of filter wheel.	10	5	B10419.009	MAUNA	#009	19:21:47		1	-1
ds:	Suppressed oscillation of filter wheel.	74	5	B10419.119	MAUNA	#119	18:46:48		1	-1
hg:	Lamp not on... hg test terminated F1= 3 F4= 32	1	1	B10419.013	RESOL	#013	11:00:15		1	-1
hg:	Lamp not detected f1= 3 f4= 32	1	1	B10419.013	RESOL	#013	11:00:16		1	-1
rl:	2019 103 21 00 15 Reset No -> Tepid from 2019 103 20 59 32 until 2057 067 14 31 54 . Counts: 1,0	18	3	B10419.205	RESOL	#205	06:23:39		1	-1
rl:	2019 103 21 00 16 Motor #3: appears stuck with a reference sensor activated.	2	1	B10419.205	RESOL	#205	06:23:43		1	-1
rl:	2019 103 21 01 39 Command not accepted while another in progress.	7	1	B10419.205	RESOL	#205	06:23:49		1	-1
hg:	Lamp not on... hg test terminated F1= 1 F4= 3	22	1	B10419.026	TORON	#026	05:32:44		1	-1
hg:	Lamp not detected f1= 1 f4= 3	22	1	B10419.026	TORON	#026	05:32:45		1	-1
hg:	HG failed	6	1	B10419.026	TORON	#026	05:32:45	failed	1	-1
hg:	HG cal too far off limits - resetting micrometer(s)	1	1	B10419.026	TORON	#026	10:45:40		1	-1
hg:	No intensity detected. Check PMT.	2	1	B10419.026	TORON	#026	10:59:32		1	-1
hgfw2:	HG FW#2 at step 192	24	5	B10419.083	TORON	#083	05:48:35	192	0	129
rl:	2019 103 06 25 38 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.667063 Volts.	15	3	B10419.190	TORON	#190	05:29:14		1	-1
rl:	2019 103 05 31 48 Motor #2: appears stuck with a reference sensor activated.	2	1	B10419.223	TORON	#223	05:26:14		1	-1
rl:	2019 104 06 46 08 PMT counter failure	1	1	B10419.223	TORON	#223	05:26:28		1	-1
rl:	2019 103 05 33 41 Motor #2: appears stuck with a reference sensor activated.	2	1	B10419.224	TORON	#224	05:24:15		1	-1
rl:	2019 103 05 54 46 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec.	5	3	B10419.224	TORON	#224	05:24:20		1	-1
rl:	2019 103 05 54 46 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec.	5	3	B10419.224	TORON	#224	05:24:20		1	-1
rl:	2019 103 05 51 45 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec.	5	3	B10419.235	TORON	#235	05:25:05		1	-1
rl:	2019 103 05 51 45 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec.	5	3	B10419.235	TORON	#235	05:25:05		1	-1

Instrument constant changes for the week before 2019104 (3 sec, 0 rows)

Serial	YYYYJJJ	SL Current	SL Voltage
223	2019097	-12.17	24.4
224	2019097	-12.11	23.9
235	2019097	-11.89	24.25
223	2019098	-12.15	24.4
224	2019098	-12.1	23.9
235	2019098	-11.89	24.22
223	2019099	-12.17	24.4
224	2019099	-12.1	23.9
235	2019099	-11.89	24.22
223	2019100	-12.15	24.4
224	2019100	-12.1	23.93
235	2019100	-11.88	24.25
223	2019101	-12.15	24.4
224	2019101	-12.08	23.93
235	2019101	-11.88	24.22
223	2019102	-12.15	24.4
224	2019102	-12.1	23.93
235	2019102	-11.88	24.22
223	2019103	-12.17	24.4
224	2019103	-12.11	23.93
235	2019103	-11.89	24.22
223	2019104	-12.15	24.4
224	2019104	-12.1	23.93
235	2019104	-11.88	24.22

Serial	YYYYJJJ	HG large	max correction
013	2019104	2	8.5
026	2019104	13	919.0
031	2019104	1	12.3
187	2019104	2	3.0
223	2019104	1	16.9

Serial	YYYYJJJ	HP large	max correction
111	2019104	2	79.9

Non-critical warnings from b-files' comments for days between 2019104 and 2019104 (1 sec, 56 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
zs:	ZS intensity too low ( 488/cy), skipping.	3	99	B10419.194	ALERT	#194	03:25:59		1	-1
rl:	2019 103 04 19 57 Reset Warm -> Tepid from 2019 103 04 19 51 until 2019 103 04 19 52 . Counts: 1,0	1	3	B10419.194	ALERT	#194	04:15:33		1	-1
zs:	ZS intensity too low ( 455/cy), skipping.	3	99	B10419.187	CARE	#187	23:18:01		1	-1
rl:	2019 103 05 39 14 Reset Warm -> Tepid from 2019 103 05 39 09 until 2019 103 05 39 09 . Counts: 1,0	1	3	B10419.191	CARE	#191	05:33:50		1	-1
rl:	2019 104 06 57 34 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.473498 Volts.	2	3	B10419.191	CARE	#191	05:34:25		1	-1
rl:	2019 103 06 34 11 Reset Warm -> Tepid from 2019 103 06 34 05 until 2019 103 06 34 06 . Counts: 1,0	1	3	B10419.203	CHURC	#203	06:19:49		1	-1
re:	Azimuth discrepancy = 37	1	99	B10419.069	EUREK	#069	06:02:55	37	-30	30
ds:	HOME key pressed	1	99	B10419.069	EUREK	#069	17:46:11		1	-1
skc:	Going to menu	1	99	B10419.069	EUREK	#069	17:46:15		1	-1
si:	New SI, HC = 6, NC = 755 Old = 6 , 760	1	99	B10419.069	EUREK	#069	18:08:01		1	-1
hh:	Illegal command (hh) in schedule ecsc, ignoring	1	99	B10419.111	EUREK	#111	06:26:14		1	-1
rl:	2019 103 05 59 27 Reset Warm -> Tepid from 2019 103 05 59 21 until 2019 103 05 59 22 . Counts: 1,0	1	3	B10419.192	EUREK	#192	05:47:44		1	-1
ab_sk:	HOME key pressed	1	99	B10419.192	EUREK	#192	18:01:29		1	-1
si:	New SI, HC = 4, NC = 1090 Old = 4 , 1090	1	99	B10419.192	EUREK	#192	18:07:46		1	-1
ds:	DS intensity too high ( 242037/cy) quitting.	1	99	B10419.018	GOOSE	#018	15:32:42		1	-1
rl:	2019 103 04 17 44 Reset Warm -> Tepid from 2019 103 04 17 38 until 2019 103 04 17 39 . Counts: 1,0	1	3	B10419.204	GOOSE	#204	04:13:42		1	-1
ds:	DS intensity too high ( 339069/cy) quitting.	3	99	B10419.204	GOOSE	#204	15:44:42		1	-1
ds:	DS intensity too low ( 3/cy), skipping.	4	99	B10419.009	MAUNA	#009	16:04:26		1	-1
zs:	ZS intensity too low ( 45/cy), skipping.	2	99	B10419.009	MAUNA	#009	16:04:41		1	-1
zs:	ZS is not done when solar zenith angle less than 30 degrees. Skipping.	1	10	B10419.119	MAUNA	#119	20:32:16		1	-1
re:	Zenith discrepancy = -2132	1	99	B10419.013	RESOL	#013	10:55:38	-2132	-10	10
re:	Azimuth discrepancy = -9761	1	99	B10419.013	RESOL	#013	10:56:53	-9761	-30	30
rl:	2019 103 21 00 16 Checksum bad in low level command.	1	3	B10419.205	RESOL	#205	06:23:40		1	-1
rl:	2019 103 21 00 16 Motor #3: appears stuck with a reference sensor activated.	1	3	B10419.205	RESOL	#205	06:23:43		1	-1
rl:	2019 103 21 00 16 Motor #11: appears stuck with a reference sensor activated.	1	3	B10419.205	RESOL	#205	06:23:45		1	-1
rl:	2019 103 21 07 05 Bad command string. Command string buffer cleared.	1	3	B10419.205	RESOL	#205	06:24:37		1	-1
rl:	2019 103 21 07 05 Bad command string. Command string buffer cleared.	1	3	B10419.205	RESOL	#205	06:24:37		1	-1
sc:	SC intensity too low ( 5/cy), skipping.	2	3	B10419.012	SATUR	#012	01:21:09		1	-1
ds:	DS intensity too high ( 202870/cy) quitting.	1	99	B10419.012	SATUR	#012	17:36:36		1	-1
zs:	ZS intensity too low ( 47/cy), skipping.	2	99	B10419.206	SATUR	#206	03:15:10		1	-1
rl:	2019 103 08 30 29 Reset Warm -> Tepid from 2019 103 08 30 23 until 2019 103 08 30 24 . Counts: 1,0	1	3	B10419.206	SATUR	#206	08:23:52		1	-1
ds:	DS intensity too high ( 206772/cy) quitting.	2	99	B10419.206	SATUR	#206	19:13:46		1	-1
ds:	Suppressed oscillation of filter wheel.	1	5	B10419.055	STONY	#055	20:30:33		1	-1
rl:	2019 103 07 50 54 Reset Warm -> Tepid from 2019 103 07 50 49 until 2019 103 07 50 49 . Counts: 1,0	1	3	B10419.195	STONY	#195	07:49:24		1	-1
ds:	Suppressed oscillation of filter wheel.	1	5	B10419.195	STONY	#195	15:47:35		1	-1
ds:	DS intensity too high ( 311138/cy) quitting.	4	99	B10419.195	STONY	#195	16:06:18		1	-1
fr:	Micrometer #1 reference found at step 9006 (+CAL)= 9925 Now set to o3 offset = 2936	4	99	B10419.026	TORON	#026	05:30:31	9925	1000	9000
mf:	Illegal command (mf) in schedule calsc, ignoring	2	99	B10419.190	TORON	#190	03:10:32		1	-1
rl:	2019 103 05 32 13 Reset Warm -> Tepid from 2019 103 05 32 07 until 2019 103 05 32 08 . Counts: 1,0	1	3	B10419.190	TORON	#190	05:29:12		1	-1
rl:	2019 104 07 44 37 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.392846 Volts.	4	3	B10419.190	TORON	#190	05:29:40		1	-1
sc:	SC intensity too low ( 174/cy), skipping.	1	3	B10419.190	TORON	#190	12:31:31		1	-1
rl:	2019 103 05 29 43 Reset Warm -> Tepid from 2019 103 05 29 37 until 2019 103 05 29 38 . Counts: 1,0	1	3	B10419.223	TORON	#223	05:26:12		1	-1
rl:	2019 103 05 58 37 New value set for watermark LOOP.RUN.TIME: 655.000019 millisec.	4	3	B10419.223	TORON	#223	05:26:19		1	-1
rl:	2019 103 05 58 37 New value set for watermark LOOP.RUN.TIME: 655.000019 millisec.	4	3	B10419.223	TORON	#223	05:26:19		1	-1
cfg_out:	Illegal command (cfg	1	99	B10419.223	TORON	#223	05:26:34		1	-1
rl:	2019 103 05 32 42 Reset Warm -> Tepid from 2019 103 05 32 36 until 2019 103 05 32 36 . Counts: 1,0	1	3	B10419.224	TORON	#224	05:24:13		1	-1
rl:	2019 103 05 54 46 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec.	4	3	B10419.224	TORON	#224	05:24:20		1	-1
rl:	2019 103 05 54 46 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec.	4	3	B10419.224	TORON	#224	05:24:20		1	-1
rl:	2019 104 06 43 18 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	1	3	B10419.224	TORON	#224	05:24:30		1	-1
rl:	2019 104 06 43 18 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	1	3	B10419.224	TORON	#224	05:24:30		1	-1
rl:	2019 103 05 34 02 Reset Warm -> Tepid from 2019 103 05 33 56 until 2019 103 05 33 57 . Counts: 1,0	1	3	B10419.235	TORON	#235	05:25:02		1	-1
rl:	2019 103 05 51 45 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec.	3	3	B10419.235	TORON	#235	05:25:05		1	-1
rl:	2019 103 05 51 45 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec.	3	3	B10419.235	TORON	#235	05:25:05		1	-1
rl:	2019 104 19 37 54 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	2	3	B10419.235	TORON	#235	05:25:12		1	-1
rl:	2019 104 19 37 54 New value set for watermark LOOP.RUN.TIME: 716.999960 millisec.	2	3	B10419.235	TORON	#235	05:25:12		1	-1
zs:	ZS intensity too low ( 316/cy), skipping.	4	99	B10419.235	TORON	#235	23:12:16		1	-1

Measurements and tests summary.

_jday	_loc	_serial	_skc	aode	ds	dt	ed	fm	fz	hg	hp	rs	sl	um	uv	zs
104	TORONTO	#008	s60mk2nv,Waiting until ZA = 92 now 88.8,Waiting until ZA = 92 now 90.8,Waiting until ZA = -85 now -86.7,Waiting until ZA = -85 now -88.4		25	3	1	28		32		3	9			112
104	MAUNA LOA OBS	#009	ecsc	90	94	2	1	28	1	15		2	6		56	13
104	SATURNA	#012	ecsc	88	89	2	1	22	1	22		2	6		60	20
104	RESOLUTE	#013	ecsc	88	88		1		9	23			6		86	30
104	TORONTO	#014	S60MK2			1	1	27		22		1	6		57	87
104	TORONTO	#015	to4mk2um,Waiting until ZA = 98 now 94.6,Waiting until ZA = 98 now 96.3			1	1			45		1	14	64	75	77
104	GOOSE BAY	#018	ecsc	93	94	2	1	23	3	17		2	6		60	27
104	ALERT	#019	ecsc	153	153	1	1		22	17		1	6		90	27
104	AMUNDSEN-SCOTT	#021	idle,Next schedule will be idle (now idle ZS= 0 ZS= 99.335),The next day will run schedule idle,Waiting until end of local day.,Waiting until ZA = 0 now -99.2,Waiting until ZA = 0 now -99.3,Waiting until ZA = 0 now -99.4			1	1			3	2	1	1
104	TORONTO	#026	ecsc,Waiting until ZA = -87 now -88.6	62	62	2	1	24		29		2	6		55	42
104	ALERT	#029	ecsc	88	88	1	1		23	14		1	6		90	69
104	RESOLUTE	#031	ecsc	107	107	2	1		10	31		2	6		93	37
104	TORONTO	#039	menu
104	TORONTO	#046	ecsc	38	38	2	1	26	3	13		2	5		58	64
104	STONY PLAIN	#055	ecsc	88	90	2	1	25	4	19		2	5		64	23
104	EUREKA	#069	ecsc,Going to menu,Starting schedule ecsc	129	129	1	1		23	13		1	6		94	38
104	TORONTO	#083	calsc			2	1	26	7	25		2	6		25	98
104	TORONTO	#084	calsc			2	1	26	6	31		2	7		26	92
104	TORONTO	#085	ecsc	18	18	2	1	25	3	15	14	2	6		59	69
104	EUREKA PEARL	#111	ecsc	121	121	1	1		25	17	19	1	7		93	42
104	MAUNA LOA OBS	#119	eceu		154	2	1	28	14	21	21	2	6			11
104	CARE	#145	S60MK3		34	1	1	26		11	21	1	4	24	52	64
104	CARE	#187	S60MK3	13	13	1	1	25		15	20	1	5	24	51	76
104	TORONTO	#190	calsc	49	49	2	1	24	7	20	20	2	7		25	44
104	CARE	#191	ecnouv	35	35	1	1	25	10	14	11	1	7			93
104	EUREKA	#192	ecsc,Starting schedule ecsc	101	101	1	1		26	9	8	1	5		85	22
104	ALERT	#194	ecsc	72	72	1	1		16	7	6	1	6		78	59
104	STONY PLAIN	#195	ecsc	68	69	2	1	20	4	8	9	2	6		59	17
104	CHURCHILL	#203	ecsc	67	67	2	1	18	3	13	11	2	4		57	18
104	GOOSE BAY	#204	ecsc	58	60	2	1	20	3	9	8	2	5		55	24
104	RESOLUTE	#205	ecsc	73	73		1		8	7	6		6		75	25
104	SATURNA	#206	ecsc		54	2	1	21		12	11	2	6		53	24
104	TORONTO	#223	ecsc		39	2	1	21	2	11	10	2	5		52	34
104	TORONTO	#224	ecsc		46	2	1	21		11	10	2	6		51	34
104	TORONTO	#235	ecauto	26	26	1	1	23		9	8	1	5		45	57
104	CHURCHILL	#239	menu
104	DelftKZ	#246	dsmk3ux		95	3				22	20	3	7		10	60

(2 sec)

Operator	Serial
Time	008
(CUT)	008
(HH:MM)	008
Time	009
(CUT)	009
(HH:MM)	009
Time	011
(CUT)	011
(HH:MM)	011
Time	012
(CUT)	012
(HH:MM)	012
Time	013
(CUT)	013
Time	014
(CUT)	014
(HH:MM)	014
Time	015
(CUT)	015
(HH:MM)	015
Time	017
(CUT)	017
(HH:MM)	017
Time	018
(CUT)	018
(HH:MM)	018
Time	019
(CUT)	019
(CUT)	021
(HH:MM)	021
Time	026
(CUT)	026
(HH:MM)	026
Time	029
(CUT)	029
Time	031
(CUT)	031
Time	046
(CUT)	046
(HH:MM)	046
(CUT)	055
(HH:MM)	055
(CUT)	069
(HH:MM)	069
(CUT)	084
(HH:MM)	084
Time	085
(CUT)	085
(HH:MM)	085
Time	111
(CUT)	111
(HH:MM)	111
Time	119
(CUT)	119
(HH:MM)	119
Time	145
(CUT)	145
(HH:MM)	145
Time	187
(CUT)	187
(HH:MM)	187
Time	190
(CUT)	190
(HH:MM)	190
Time	191
(CUT)	191
(HH:MM)	191
Time	194
(CUT)	194
(HH:MM)	194
Time	195
(CUT)	195
(HH:MM)	195
Time	203
(CUT)	203
(HH:MM)	203
Time	204
(CUT)	204
(HH:MM)	204
Time	205
(CUT)	205
(HH:MM)	205
Time	206
(CUT)	206
(HH:MM)	206
Time	235
(CUT)	235
(HH:MM)	235
Time	239
(CUT)	239
(HH:MM)	239

Database last updated on Sat, 12 Sep 2026 18:10:59 +0000 by localhost

Critical warnings from b-files' comments for days between 2019104 and 2019104 (2 sec, 25 rows)

Instrument constant changes for the week before 2019104 (3 sec, 0 rows)

SL burned out? (AP results when SL is ON) (0 sec, 24 rows)

Hg with step corrections larger than 10 steps or multiple corrections larger than 2.5 steps (0 sec, 5 rows)

HP with step corrections larger than 20 steps (0 sec, 1 rows)

Non-critical warnings from b-files' comments for days between 2019104 and 2019104 (1 sec, 56 rows)

Measurements and tests summary.

New operators? (0 sec, 91 rows)

Relative and absolute humidity for day 2019104 (2 sec, 31 rows)