| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2018 186 11 48 21 Reset No -> Tepid from 2018 174 15 56 19 until 1992 186 11 48 15 . Counts: 1,0 | 1 | 3 | B18618.190 | ALERT | #190 | 04:18:33 | | 1 | -1 |
| rl: | 2018 186 11 48 22 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B18618.190 | ALERT | #190 | 04:18:36 | | 1 | -1 |
| rl: | 2018 186 21 04 35 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec. | 1 | 3 | B18618.190 | ALERT | #190 | 04:19:07 | | 1 | -1 |
| az: | Azimuth discrepancy = 129 | 1 | 99 | B18618.190 | ALERT | #190 | 12:49:21 | 129 | -30 | 30 |
| si: | New SI, HC = -16, NC = -1300 Old = -8 , -480 | 3 | 99 | B18618.190 | ALERT | #190 | 13:03:35 | | 1 | -1 |
| sc: | SC intensity too low ( 273/cy), skipping. | 2 | 3 | B18618.190 | ALERT | #190 | 21:00:16 | | 1 | -1 |
| rl: | 2018 185 04 34 13 Reset Warm -> Tepid from 2018 185 04 34 08 until 2018 185 04 34 08 . Counts: 1,0 | 1 | 3 | B18618.194 | ALERT | #194 | 04:32:53 | | 1 | -1 |
| rl: | 2018 186 08 22 30 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec. | 1 | 3 | B18618.194 | ALERT | #194 | 04:33:24 | | 1 | -1 |
| md: | Illegal command (md) in schedule idle, ignoring | 2 | 99 | B18618.021 | AMUND | #021 | 20:56:46 | | 1 | -1 |
| re: | Zenith discrepancy = 49 | 2 | 99 | B18618.026 | CHURC | #026 | 06:32:57 | 49 | -10 | 10 |
| fr: | HOME key pressed | 2 | 99 | B18618.026 | CHURC | #026 | 19:49:58 | | 1 | -1 |
| fr: | Going to menu | 1 | 99 | B18618.026 | CHURC | #026 | 19:50:01 | | 1 | -1 |
| rl: | 2018 185 06 33 51 Reset Warm -> Tepid from 2018 185 06 33 45 until 2018 185 06 33 45 . Counts: 1,0 | 1 | 3 | B18618.203 | CHURC | #203 | 06:31:16 | | 1 | -1 |
| rl: | 2018 186 21 15 05 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 2 | 3 | B18618.203 | CHURC | #203 | 06:31:50 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B18618.069 | EUREK | #069 | 19:33:52 | | 1 | -1 |
| ds: | DS intensity too high ( 214550/cy) quitting. | 1 | 99 | B18618.111 | EUREK | #111 | 16:26:21 | | 1 | -1 |
| rl: | 2018 185 06 05 29 Reset Warm -> Tepid from 2018 185 06 05 23 until 2018 185 06 05 24 . Counts: 1,0 | 1 | 3 | B18618.192 | EUREK | #192 | 06:02:10 | | 1 | -1 |
| rl: | 2018 186 08 25 06 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 2 | 3 | B18618.192 | EUREK | #192 | 06:02:12 | | 1 | -1 |
| rl: | 2018 186 08 25 06 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 2 | 3 | B18618.192 | EUREK | #192 | 06:02:12 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B18618.192 | EUREK | #192 | 19:17:13 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B18618.018 | GOOSE | #018 | 11:07:43 | | 1 | -1 |
| rl: | 2018 185 04 21 34 Reset Warm -> Tepid from 2018 185 04 21 28 until 2018 185 04 21 29 . Counts: 1,0 | 1 | 3 | B18618.204 | GOOSE | #204 | 04:16:45 | | 1 | -1 |
| rl: | 2018 186 07 53 48 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec. | 1 | 3 | B18618.204 | GOOSE | #204 | 04:16:48 | | 1 | -1 |
| rl: | 2018 186 07 53 48 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec. | 1 | 3 | B18618.204 | GOOSE | #204 | 04:16:48 | | 1 | -1 |
| sc: | Suppressed oscillation of filter wheel. | 1 | 5 | B18618.204 | GOOSE | #204 | 10:56:40 | | 1 | -1 |
| ds: | DS intensity too high ( 212377/cy) quitting. | 1 | 99 | B18618.204 | GOOSE | #204 | 21:59:17 | | 1 | -1 |
| uvfocusd: | Illegal command (uvfocusd) in schedule ecsc, ignoring | 1 | 99 | B18618.009 | MAUNA | #009 | 11:11:21 | | 1 | -1 |
| ds: | DS intensity too low ( 95/cy), skipping. | 3 | 99 | B18618.009 | MAUNA | #009 | 16:04:26 | | 1 | -1 |
| zs: | ZS intensity too low ( 229/cy), skipping. | 1 | 99 | B18618.009 | MAUNA | #009 | 16:04:41 | | 1 | -1 |
| fz: | Suppressed oscillation of filter wheel. | 3 | 5 | B18618.009 | MAUNA | #009 | 16:32:28 | | 1 | -1 |
| ga: | Illegal command (ga) in schedule ecsc, ignoring | 1 | 99 | B18618.119 | MAUNA | #119 | 11:16:58 | | 1 | -1 |
| ds: | DS intensity too low ( 10/cy), skipping. | 4 | 99 | B18618.119 | MAUNA | #119 | 15:51:31 | | 1 | -1 |
| zs: | ZS intensity too low ( 413/cy), skipping. | 3 | 99 | B18618.119 | MAUNA | #119 | 15:51:46 | | 1 | -1 |
| ds: | DS intensity too high ( 204647/cy) quitting. | 1 | 99 | B18618.119 | MAUNA | #119 | 19:13:33 | | 1 | -1 |
| td: | Time correction 41.2 seconds | 1 | 3 | B18618.031 | RESOL | #031 | 11:08:52 | 41.2 | -3 | 3 |
| rl: | 2018 185 06 41 00 Reset Warm -> Tepid from 2018 185 06 40 54 until 2018 185 06 40 55 . Counts: 1,0 | 1 | 3 | B18618.205 | RESOL | #205 | 06:34:54 | | 1 | -1 |
| rl: | 2018 186 10 06 00 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 2 | 3 | B18618.205 | RESOL | #205 | 06:34:56 | | 1 | -1 |
| rl: | 2018 186 10 06 00 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 2 | 3 | B18618.205 | RESOL | #205 | 06:34:56 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 1 | 5 | B18618.012 | SATUR | #012 | 01:55:03 | | 1 | -1 |
| ds: | DS intensity too high ( 319672/cy) quitting. | 2 | 99 | B18618.012 | SATUR | #012 | 15:24:30 | | 1 | -1 |
| rl: | 2018 185 08 31 26 Reset Warm -> Tepid from 2018 185 08 31 20 until 2018 185 08 31 21 . Counts: 1,0 | 1 | 3 | B18618.206 | SATUR | #206 | 08:28:42 | | 1 | -1 |
| rl: | 2018 186 13 25 49 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec. | 1 | 3 | B18618.206 | SATUR | #206 | 08:28:45 | | 1 | -1 |
| rl: | 2018 186 13 25 49 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec. | 1 | 3 | B18618.206 | SATUR | #206 | 08:28:45 | | 1 | -1 |
| ds: | DS intensity too high ( 250598/cy) quitting. | 1 | 99 | B18618.206 | SATUR | #206 | 14:35:41 | | 1 | -1 |
| re: | Zenith discrepancy = -1103 | 1 | 99 | B18618.055 | STONY | #055 | 00:07:45 | -1103 | -10 | 10 |
| re: | Azimuth discrepancy = 5335 | 1 | 99 | B18618.055 | STONY | #055 | 00:08:34 | 5335 | -30 | 30 |
| ds: | HOME key pressed | 3 | 99 | B18618.055 | STONY | #055 | 21:54:02 | | 1 | -1 |
| ds: | Going to menu | 2 | 99 | B18618.055 | STONY | #055 | 21:54:06 | | 1 | -1 |
| uv: | UV standard scan aborted | 1 | 3 | B18618.055 | STONY | #055 | 22:03:59 | | 1 | -1 |
| rl: | 2018 186 21 57 13 Reset No -> Tepid from 2018 186 21 55 27 until 2015 186 21 57 08 . Counts: 1,0 | 1 | 3 | B18618.195 | STONY | #195 | 07:49:52 | | 1 | -1 |
| rl: | 2018 186 21 57 13 Checksum bad in low level command. | 1 | 3 | B18618.195 | STONY | #195 | 07:49:54 | | 1 | -1 |
| rl: | 2018 186 21 57 14 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B18618.195 | STONY | #195 | 07:49:56 | | 1 | -1 |
| rl: | 2018 186 21 57 14 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B18618.195 | STONY | #195 | 07:49:59 | | 1 | -1 |
| rl: | 2018 186 01 00 17 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 1 | 3 | B18618.195 | STONY | #195 | 07:50:01 | | 1 | -1 |
| rl: | 2018 186 01 00 17 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 1 | 3 | B18618.195 | STONY | #195 | 07:50:01 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B18618.195 | STONY | #195 | 21:54:03 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B18618.195 | STONY | #195 | 21:54:07 | | 1 | -1 |
| si: | New SI, HC = 16, NC = -620 Old = 16 , -620 | 1 | 99 | B18618.195 | STONY | #195 | 22:02:51 | | 1 | -1 |
| ds: | DS intensity too high ( 244870/cy) quitting. | 2 | 99 | B18618.008 | TORON | #008 | 18:36:00 | | 1 | -1 |
| fr: | Micrometer #1 reference found at step 11029 (+CAL)= 12365 Now set to o3 offset = 12404 | 1 | 99 | B18618.011 | TORON | #011 | 05:37:04 | 12365 | 1000 | 9000 |
| ds: | Suppressed oscillation of filter wheel. | 3 | 5 | B18618.011 | TORON | #011 | 13:04:26 | | 1 | -1 |
| ds: | DS intensity too high ( 235420/cy) quitting. | 3 | 99 | B18618.011 | TORON | #011 | 18:36:11 | | 1 | -1 |
| sc: | SC intensity too low ( 269/cy), skipping. | 4 | 3 | B18618.011 | TORON | #011 | 20:55:09 | | 1 | -1 |
| zs: | ZS is not done when solar zenith angle less than 30 degrees. Skipping. | 3 | 10 | B18618.014 | TORON | #014 | 17:59:10 | | 1 | -1 |
| re: | Azimuth discrepancy = -78 | 1 | 99 | B18618.015 | TORON | #015 | 05:30:39 | -78 | -30 | 30 |
| ds: | DS intensity too high ( 333882/cy) quitting. | 1 | 99 | B18618.015 | TORON | #015 | 19:05:54 | | 1 | -1 |
| ds: | DS intensity too high ( 284751/cy) quitting. | 3 | 99 | B18618.039 | TORON | #039 | 18:08:16 | | 1 | -1 |
| ds: | DS intensity too high ( 210013/cy) quitting. | 3 | 99 | B18618.084 | TORON | #084 | 18:08:09 | | 1 | -1 |
| sc: | SC intensity too low ( 320/cy), skipping. | 3 | 3 | B18618.084 | TORON | #084 | 20:58:45 | | 1 | -1 |
| sl: | Will do AZ for #085 | 1 | 99 | B18618.085 | TORON | #085 | 04:36:57 | #085 | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B18618.085 | TORON | #085 | 11:12:41 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B18618.085 | TORON | #085 | 11:12:44 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B18618.085 | TORON | #085 | 16:36:11 | | 1 | -1 |
| ds: | DS intensity too high ( 264891/cy) quitting. | 1 | 99 | B18618.085 | TORON | #085 | 18:36:19 | | 1 | -1 |
| ds: | DS intensity too high ( 393062/cy) quitting. | 1 | 99 | B18618.145 | TORON | #145 | 18:35:47 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 4 | 5 | B18618.187 | TORON | #187 | 16:35:10 | | 1 | -1 |
| ds: | DS intensity too high ( 230024/cy) quitting. | 2 | 99 | B18618.187 | TORON | #187 | 18:35:49 | | 1 | -1 |
| rl: | 2018 185 05 27 18 Reset Warm -> Tepid from 2018 185 05 27 12 until 2018 185 05 27 13 . Counts: 1,0 | 1 | 3 | B18618.191 | TORON | #191 | 05:27:43 | | 1 | -1 |
| rl: | 2018 185 05 43 58 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 1 | 3 | B18618.191 | TORON | #191 | 05:27:44 | | 1 | -1 |
| rl: | 2018 185 05 43 58 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 3 | 3 | B18618.191 | TORON | #191 | 05:27:44 | | 1 | -1 |
| ds: | DS intensity too high ( 544067/cy) quitting. | 3 | 99 | B18618.191 | TORON | #191 | 18:08:25 | | 1 | -1 |
| rl: | 2018 185 10 16 55 Reset Tepid -> Tepid from 2018 170 07 23 09 until 2018 185 10 16 50 . Counts: 1,0 | 1 | 3 | B18618.223 | TORON | #223 | 05:25:09 | | 1 | -1 |
| rl: | 2018 185 10 16 56 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B18618.223 | TORON | #223 | 05:25:11 | | 1 | -1 |
| rl: | 2018 185 10 16 56 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B18618.223 | TORON | #223 | 05:25:14 | | 1 | -1 |
| rl: | 2018 185 11 43 17 New value set for watermark LOOP.RUN.TIME: 700.999975 millisec. | 4 | 3 | B18618.223 | TORON | #223 | 05:25:19 | | 1 | -1 |
| rl: | 2018 185 11 43 17 New value set for watermark LOOP.RUN.TIME: 700.999975 millisec. | 4 | 3 | B18618.223 | TORON | #223 | 05:25:19 | | 1 | -1 |
| rl: | 2018 185 12 07 55 Attempt to exceed min boundary | 4 | 3 | B18618.223 | TORON | #223 | 05:25:25 | | 1 | -1 |
| rl: | 2018 185 12 07 55 <M,10,-6310> | 4 | 3 | B18618.223 | TORON | #223 | 05:25:27 | | 1 | -1 |
| rl: | 2018 185 12 07 55 <M,10,-6310> | 4 | 5 | B18618.223 | TORON | #223 | 05:25:27 | | 1 | -1 |
| rl: | 2018 185 12 39 41 Reset Warm -> Warm from 2018 185 12 39 19 until 2018 185 12 39 20 . Counts: 0,1 | 1 | 3 | B18618.223 | TORON | #223 | 05:25:40 | | 1 | -1 |
| rl: | 2018 185 12 46 16 Reset No -> Warm from 2018 185 12 46 01 until 2018 185 12 39 20 . Counts: 0,1 | 1 | 3 | B18618.223 | TORON | #223 | 05:25:45 | | 1 | -1 |
| rl: | 2018 186 10 46 02 Reset Warm -> Warm from 2018 186 10 45 58 until 2018 186 10 45 59 . Counts: 0,1 | 1 | 3 | B18618.223 | TORON | #223 | 05:25:57 | | 1 | -1 |
| skc: | Going to menu | 1 | 99 | B18618.223 | TORON | #223 | 18:47:23 | | 1 | -1 |
| ds: | DS intensity too high ( 498849/cy) quitting. | 1 | 99 | B18618.223 | TORON | #223 | 19:06:01 | | 1 | -1 |
| rl: | 2018 186 12 44 07 Reset Warm -> Tepid from 2018 186 12 44 02 until 2018 186 12 44 02 . Counts: 1,5 | 2 | 3 | B18618.224 | TORON | #224 | 05:29:38 | | 1 | -1 |
| rl: | 2018 186 12 50 28 New value set for watermark LOOP.RUN.TIME: 769.000006 millisec. | 2 | 3 | B18618.224 | TORON | #224 | 05:29:42 | | 1 | -1 |
| rl: | 2018 186 12 50 28 New value set for watermark LOOP.RUN.TIME: 769.000006 millisec. | 2 | 3 | B18618.224 | TORON | #224 | 05:29:42 | | 1 | -1 |
| rl: | 2018 186 13 18 05 Motor #10: appears stuck with a reference sensor activated. | 1 | 3 | B18618.224 | TORON | #224 | 05:29:49 | | 1 | -1 |
| ab_sk: | HOME key pressed | 2 | 99 | B18618.224 | TORON | #224 | 12:39:06 | | 1 | -1 |
| re: | Azimuth discrepancy = 4249 | 1 | 99 | B18618.224 | TORON | #224 | 12:43:29 | 4249 | -30 | 30 |
| sc: | Going to menu | 1 | 99 | B18618.224 | TORON | #224 | 12:53:24 | | 1 | -1 |
| si: | New SI, HC = 9, NC = 565 Old = -29 , 415 | 1 | 99 | B18618.224 | TORON | #224 | 13:12:30 | | 1 | -1 |
| fr: | Micrometer #1 reference found at step-930 (+CAL)= 86 Now set to o3 offset = 0 | 1 | 99 | B18618.224 | TORON | #224 | 13:14:03 | 86 | 1000 | 9000 |
| ds: | DS intensity too high ( 478983/cy) quitting. | 3 | 99 | B18618.224 | TORON | #224 | 18:08:36 | | 1 | -1 |
| sc: | SC intensity too low ( 258/cy), skipping. | 4 | 3 | B18618.224 | TORON | #224 | 20:56:11 | | 1 | -1 |
| rl: | 2018 185 05 35 11 Reset Warm -> Tepid from 2018 185 05 35 05 until 2018 185 05 35 05 . Counts: 1,0 | 1 | 3 | B18618.235 | TORON | #235 | 05:31:40 | | 1 | -1 |
| rl: | 2018 186 12 12 38 New value set for watermark LOOP.RUN.TIME: 724.000025 millisec. | 3 | 3 | B18618.235 | TORON | #235 | 05:31:57 | | 1 | -1 |
| rl: | 2018 186 12 12 38 New value set for watermark LOOP.RUN.TIME: 724.000025 millisec. | 3 | 3 | B18618.235 | TORON | #235 | 05:31:57 | | 1 | -1 |
| hg: | HOME key pressed | 3 | 99 | B18618.235 | TORON | #235 | 10:55:03 | | 1 | -1 |
| hg: | Going to menu | 3 | 99 | B18618.235 | TORON | #235 | 10:55:05 | | 1 | -1 |
| ds: | DS intensity too high ( 218566/cy) quitting. | 1 | 99 | B18618.235 | TORON | #235 | 18:31:55 | | 1 | -1 |