Analysing b-file records for potential instrument or data problems.

Critical warnings from b-files' comments for days between 2018025 and 2018025 (1 sec, 17 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
rl:	2018 024 05 01 14 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.645555 Volts.	16	3	B02518.190	ALERT	#190	04:26:34		1	-1
sl:	Lamp not on... sl test terminated F1= 1 F4= 333	67	1	B02518.026	CHURC	#026	14:40:27		1	-1
hg:	Lamp not detected f1= 1 f4= 437	60	1	B02518.026	CHURC	#026	19:22:01		1	-1
hg:	HG failed	30	1	B02518.026	CHURC	#026	19:25:46	failed	1	-1
rl:	2018 025 16 34 50 PMT counter failure	1	1	B02518.203	CHURC	#203	06:44:17		1	-1
hg:	Lamp not detected f1= 0 f4= 90	1	1	B02518.223	Delft	#223	01:51:21		1	-1
hg:	Lamp not on... hg test terminated F1= 0 F4= 90	1	1	B02518.223	Delft	#223	01:51:21		1	-1
rl:	2018 025 15 08 52 Attempt to exceed min boundary	10	3	B02518.195	STONY	#195	08:04:13		1	-1
rl:	2018 025 15 08 52 <M,2,-43:M,1, 546>	10	3	B02518.195	STONY	#195	08:04:15		1	-1
rl:	2018 025 15 08 52 <M,2,-43:M,1, 546>	10	5	B02518.195	STONY	#195	08:04:15		1	-1
hg:	No intensity detected. Check PMT.	1	1	B02518.011	TORON	#011	06:11:40		1	-1
rl:	2018 024 05 51 45 New value set for watermark SUPPLY.VOLTAGE.HIGH[-5VSEC]: -4.613295 Volts.	14	3	B02518.194	TORON	#194	05:40:01		1	-1
rl:	2018 024 06 01 30 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	6	3	B02518.235	TORON	#235	05:39:25		1	-1
rl:	2018 024 06 01 30 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	6	3	B02518.235	TORON	#235	05:39:25		1	-1
rl:	2018 024 05 40 54 Motor #11: appears stuck with a reference sensor activated.	1	1	B02518.239	TORON	#239	05:37:20		1	-1
rl:	2018 024 06 04 57 New value set for watermark LOOP.RUN.TIME: 683.000040 millisec.	7	3	B02518.239	TORON	#239	05:37:21		1	-1
rl:	2018 024 06 04 57 New value set for watermark LOOP.RUN.TIME: 683.000040 millisec.	7	3	B02518.239	TORON	#239	05:37:21		1	-1

Instrument constant changes for the week before 2018025 (3 sec, 0 rows)

Serial	YYYYJJJ	HG large	max correction
011	2018025	4	24.0
012	2018025	1	12.1
015	2018025	2	9.7
018	2018025	1	18.5
031	2018025	1	10.4
046	2018025	1	32.0
119	2018025	16	92.0
223	2018025	6	12.0

Serial	YYYYJJJ	HP large	max correction
085	2018025	1	20.3
111	2018025	2	79.9
119	2018025	6	80.0
223	2018025	1	36.1

Non-critical warnings from b-files' comments for days between 2018025 and 2018025 (1 sec, 57 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
rl:	2018 024 04 29 55 Reset Warm -> Tepid from 2018 024 04 29 49 until 2018 024 04 29 50 . Counts: 1,0	1	3	B02518.190	ALERT	#190	04:26:32		1	-1
rl:	2018 024 05 14 55 New value set for watermark LOOP.RUN.TIME: 665.000010 millisec.	1	3	B02518.190	ALERT	#190	04:26:46		1	-1
ds:	DS intensity too high ( 229640/cy) quitting.	4	99	B02518.021	AMUND	#021	05:14:53		1	-1
hg:	HOME key pressed	4	99	B02518.026	CHURC	#026	22:27:34		1	-1
ze:	Zenith discrepancy = 287	1	99	B02518.026	CHURC	#026	22:29:42	287	-10	10
rl:	2018 024 06 40 31 Reset Warm -> Tepid from 2018 024 06 40 25 until 2018 024 06 40 26 . Counts: 1,0	1	3	B02518.203	CHURC	#203	06:44:13		1	-1
rl:	2018 025 08 17 50 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.203	CHURC	#203	06:44:15		1	-1
rl:	2018 025 08 17 50 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.203	CHURC	#203	06:44:15		1	-1
zs:	ZS intensity too low ( 203/cy), skipping.	3	99	B02518.203	CHURC	#203	14:40:00		1	-1
skc:	Going to menu	2	99	B02518.223	Delft	#223	11:49:50		1	-1
hg:	DEL key pressed	1	99	B02518.223	Delft	#223	12:22:43		1	-1
sl:	HOME key pressed	1	99	B02518.223	Delft	#223	12:35:49		1	-1
rl:	2018 024 06 03 05 Reset Warm -> Tepid from 2018 024 06 02 59 until 2018 024 06 03 00 . Counts: 1,0	1	3	B02518.192	EUREK	#192	06:01:51		1	-1
rl:	2018 025 02 29 09 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.192	EUREK	#192	06:01:53		1	-1
rl:	2018 025 02 29 09 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.192	EUREK	#192	06:01:53		1	-1
rl:	2018 024 04 26 22 Reset Warm -> Tepid from 2018 024 04 26 17 until 2018 024 04 26 17 . Counts: 1,0	1	3	B02518.204	GOOSE	#204	04:19:37		1	-1
rl:	2018 025 19 51 07 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec.	1	3	B02518.204	GOOSE	#204	04:19:39		1	-1
rl:	2018 025 19 51 07 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec.	1	3	B02518.204	GOOSE	#204	04:19:39		1	-1
ds:	DS intensity too high ( 216434/cy) quitting.	1	99	B02518.009	MAUNA	#009	02:08:58		1	-1
uvfocusd:	Illegal command (uvfocusd) in schedule ecsc, ignoring	1	99	B02518.009	MAUNA	#009	11:19:11		1	-1
zs:	ZS intensity too low ( 225/cy), skipping.	1	99	B02518.009	MAUNA	#009	17:04:41		1	-1
zs:	ZS intensity too low ( 204/cy), skipping.	1	99	B02518.119	MAUNA	#119	17:40:57		1	-1
rl:	2018 024 06 45 38 Reset Warm -> Tepid from 2018 024 06 45 32 until 2018 024 06 45 33 . Counts: 1,0	1	3	B02518.205	RESOL	#205	06:46:00		1	-1
rl:	2018 025 09 59 56 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.205	RESOL	#205	06:46:02		1	-1
rl:	2018 025 09 59 56 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.205	RESOL	#205	06:46:02		1	-1
rl:	2018 024 08 44 20 Reset Warm -> Tepid from 2018 024 08 44 14 until 2018 024 08 44 15 . Counts: 1,0	1	3	B02518.206	SATUR	#206	08:39:10		1	-1
rl:	2018 025 10 25 17 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.206	SATUR	#206	08:39:13		1	-1
rl:	2018 025 10 25 17 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.206	SATUR	#206	08:39:13		1	-1
zs:	ZS intensity too low ( 332/cy), skipping.	1	99	B02518.206	SATUR	#206	16:10:00		1	-1
rl:	2018 024 08 04 59 Reset Warm -> Tepid from 2018 024 08 04 53 until 2018 024 08 04 54 . Counts: 1,0	1	3	B02518.195	STONY	#195	08:04:12		1	-1
rl:	2018 025 17 52 58 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.195	STONY	#195	08:04:47		1	-1
rl:	2018 025 17 52 58 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.195	STONY	#195	08:04:47		1	-1
fr:	Micrometer #1 reference found at step 11046 (+CAL)= 12377 Now set to o3 offset = 12394	1	99	B02518.011	TORON	#011	05:50:38	12377	1000	9000
hg:	Illegal command (hg) in schedule s60mk2, ignoring	1	99	B02518.011	TORON	#011	05:50:51		1	-1
ds:	Suppressed oscillation of filter wheel.	2	5	B02518.011	TORON	#011	16:42:06		1	-1
re:	Azimuth discrepancy = -60	1	99	B02518.015	TORON	#015	05:34:43	-60	-30	30
um:	HOME key pressed	1	99	B02518.015	TORON	#015	13:40:16		1	-1
skc:	Going to menu	1	99	B02518.015	TORON	#015	13:40:33		1	-1
ds:	Suppressed oscillation of filter wheel.	1	5	B02518.085	TORON	#085	15:54:12		1	-1
ds:	Suppressed oscillation of filter wheel.	1	5	B02518.187	TORON	#187	15:59:25		1	-1
rl:	2018 024 05 35 19 Reset Warm -> Tepid from 2018 024 05 35 13 until 2018 024 05 35 14 . Counts: 1,0	1	3	B02518.191	TORON	#191	05:37:50		1	-1
ds:	DS intensity too high ( 238913/cy) quitting.	1	99	B02518.191	TORON	#191	14:55:17		1	-1
rl:	2018 024 05 50 41 Reset Warm -> Tepid from 2018 024 05 50 35 until 2018 024 05 50 36 . Counts: 1,0	1	3	B02518.194	TORON	#194	05:39:59		1	-1
rl:	2018 025 21 42 15 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.194	TORON	#194	05:40:32		1	-1
rl:	2018 025 21 42 15 New value set for watermark LOOP.RUN.TIME: 659.999990 millisec.	1	3	B02518.194	TORON	#194	05:40:32		1	-1
ds:	Suppressed oscillation of filter wheel.	1	5	B02518.194	TORON	#194	17:17:44		1	-1
rl:	2018 024 05 40 54 Reset Warm -> Tepid from 2018 024 05 40 48 until 2018 024 05 40 49 . Counts: 1,0	1	3	B02518.235	TORON	#235	05:39:23		1	-1
rl:	2018 024 06 01 30 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	3	3	B02518.235	TORON	#235	05:39:25		1	-1
rl:	2018 024 06 01 30 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	3	3	B02518.235	TORON	#235	05:39:25		1	-1
rl:	2018 025 12 59 00 New value set for watermark LOOP.RUN.TIME: 723.000050 millisec.	3	3	B02518.235	TORON	#235	05:39:32		1	-1
rl:	2018 025 12 59 00 New value set for watermark LOOP.RUN.TIME: 723.000050 millisec.	3	3	B02518.235	TORON	#235	05:39:32		1	-1
rl:	2018 024 05 40 52 Reset Warm -> Tepid from 2018 024 05 40 47 until 2018 024 05 40 47 . Counts: 1,0	1	3	B02518.239	TORON	#239	05:37:19		1	-1
rl:	2018 024 05 40 54 Motor #11: appears stuck with a reference sensor activated.	1	3	B02518.239	TORON	#239	05:37:20		1	-1
rl:	2018 025 13 30 02 New value set for watermark LOOP.RUN.TIME: 723.000050 millisec.	1	3	B02518.239	TORON	#239	05:37:29		1	-1
rl:	2018 025 13 30 02 New value set for watermark LOOP.RUN.TIME: 723.000050 millisec.	1	3	B02518.239	TORON	#239	05:37:29		1	-1
ds:	DS intensity too high ( 213836/cy) quitting.	2	99	B02518.239	TORON	#239	14:42:40		1	-1
ds:	Suppressed oscillation of filter wheel.	1	5	B02518.239	TORON	#239	14:42:57		1	-1

Measurements and tests summary.

_jday	_loc	_serial	_skc	aode	ds	dt	ed	fm	fz	hg	hp	rs	sl	um	uv	zs
025	TORONTO	#008	s60mk2nv,Waiting until ZA = 92 now 89,Waiting until ZA = 92 now 91,Waiting until ZA = -85 now -86,Waiting until ZA = -85 now -87.5,Waiting until ZA = -85 now -89		48	3	1	36		25		3	8			60
025	MAUNA LOA OBS	#009	ecsc		72	2	1	32		11		2	5		50	23
025	TORONTO	#011	s60mk2	27	27	1	1	36		25		1	6		43	39
025	SATURNA	#012	ecsc		12	2	1	38		14		2	6		38	59
025	RESOLUTE	#013	ecsc			2	1	53		15		2	5		16
025	TORONTO	#014	s60mk2	27	27	1	1	35		20		1	6		43	40
025	TORONTO	#015	Going to menu,to1mk2um,Waiting until ZA = 98 now 94.2,Waiting until ZA = 98 now 95.9,Waiting until ZA = 98 now 97.6	19	19	1	1			41		1	17	261	67	15
025	GOOSE BAY	#018	ecsc	37	37	2	1	37	6	11		2	6		39	35
025	ALERT	#019	ecsc			2	1	47		9		2	5
025	AMUNDSEN-SCOTT	#021	spsun		309	1	1			10	9	1	2			49
025	CHURCHILL	#026	ecsc	2	2		1	38		18			2		29	22
025	ALERT	#029	ecsc			2	1	47		7		2	5
025	RESOLUTE	#031	ecsc	1	1	2	1	53		22		2	5		16
025	TORONTO	#046	ecsc	66	66	2	1	36	4	11		2	6		47	17
025	STONY PLAIN	#055	ecsc	19	19	2	1	38	6	11		2	4		45	42
025	EUREKA	#069	ECSC			2	1	52		10		2	5
025	TORONTO	#085	ecsc	27	27	2	1	35	4	12	13	2	5		48	34
025	EUREKA	#111	ECSC			2	1	51		8	10	2	5
025	MAUNA LOA OBS	#119	ecsc		53	2	1	31	1	30	24	2	5		49	23
025	TORONTO	#145	s60mk3		24	1	1	34		19	18	1	4	26	37	40
025	TORONTO	#187	S60MK3		27	1	1	34		22	18	1	4	24	37	37
025	ALERT	#190	ecnouv			1	1	38		13	12	1	5
025	TORONTO	#191	ecnouv	61	61	1	1	34	11	12	10	1	6			47
025	EUREKA	#192	ecsc			2	1	48		7	7	2	5
025	TORONTO	#194	ecsc	30	30	2	1	30	3	9	8	2	5		43	24
025	STONY PLAIN	#195	ecsc	38	38	2	1	34	5	10	9	2	5		39	12
025	CHURCHILL	#203	ecsc	15	15	2	1	36	6	10	8	2	6		31	26
025	GOOSE BAY	#204	ecsc	6	6	2	1	33	5	9	8	2	5		34	36
025	RESOLUTE	#205	ecsc			2	1	49		12	12	2	6		12
025	SATURNA	#206	ecsc		15	2	1	33		15	10	2	4		31	42
025	Delft	#223	dsmk3ec,Going to menu			5				17	16	5	11		4
025	Delft	#224	dsmk3ec			6				15	15	6	13		4
025	TORONTO	#235	ecsc	22	22	2	1	31	3	8	8	2	5		42	29
025	TORONTO	#239	ecsc	50	51	2	1	32	3	10	10	2	6		42	10

(2 sec)

Days ago	Date	Serial	Time	Operator	Comment
001	2018024	#192	06:36	ES	SOFTWARE UPDATE ERROR. BREWER OFFLINE 0412Z. SOFTWARE RESET 0636Z.
003	2018022	#192	17:23	MM	HOME @ 1723Z, AZTDZE @ 1724Z, NO SIM DUE TO NO MOON, SKC @ 1726Z

Database last updated on Tue, 15 Sep 2026 01:41:06 +0000 by localhost

Critical warnings from b-files' comments for days between 2018025 and 2018025 (1 sec, 17 rows)

Instrument constant changes for the week before 2018025 (3 sec, 0 rows)

Hg with step corrections larger than 10 steps or multiple corrections larger than 2.5 steps (0 sec, 8 rows)

HP with step corrections larger than 20 steps (0 sec, 4 rows)

Non-critical warnings from b-files' comments for days between 2018025 and 2018025 (1 sec, 57 rows)

Measurements and tests summary.

Operator comments in the log-files for the week before 2018025 (0 sec, 2 rows)

New operators? (0 sec, 9 rows)

Relative and absolute humidity for day 2018025 (2 sec, 30 rows)

Operator	Serial
5:19	055
11:33	055
9:17	055
4:45	055
5:30	111
6:42	111
6:47	111
MM	192
12:18	195