| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
| rl: | 2022 361 12 37 46 Attempt to exceed max boundary | 59 | 3 | B36122.223 | EUREK | #223 | 05:51:00 | | 1 | -1 |
| rl: | 2022 361 12 37 46 <M,9,-1:M,9,501> | 60 | 3 | B36122.223 | EUREK | #223 | 05:51:02 | | 1 | -1 |
| rl: | 2022 361 12 37 46 <M,9,-1:M,9,501> | 59 | 5 | B36122.223 | EUREK | #223 | 05:51:02 | | 1 | -1 |
| rl: | 2022 361 13 58 42 Command not accepted while another in progress. | 1 | 1 | B36122.223 | EUREK | #223 | 05:55:47 | | 1 | -1 |
| rl: | 2022 361 15 11 39 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 5 | 3 | B36122.223 | EUREK | #223 | 05:55:54 | | 1 | -1 |
| rl: | 2022 361 15 11 39 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 5 | 3 | B36122.223 | EUREK | #223 | 05:55:54 | | 1 | -1 |
| rl: | 2022 361 15 21 09 PMT counter failure | 1 | 1 | B36122.223 | EUREK | #223 | 05:56:05 | | 1 | -1 |
| rl: | 2022 361 15 56 07 Motor #2: appears stuck with a reference sensor activated. | 2 | 1 | B36122.223 | EUREK | #223 | 05:56:11 | | 1 | -1 |
| fr: | 11000 steps - QUIT - Micrometer #2 reference not found | 6 | 1 | B36122.223 | EUREK | #223 | 12:07:25 | | 1 | -1 |
| hp: | Spectrometer alignment trouble. | 1 | 1 | B36122.223 | EUREK | #223 | 12:08:58 | | 1 | -1 |
| hg: | Lamp not on... hg test terminated F1= 0 F4= 0 | 4 | 1 | B36122.223 | EUREK | #223 | 12:11:41 | | 1 | -1 |
| hg: | No intensity detected. Check PMT. | 1 | 1 | B36122.223 | EUREK | #223 | 12:11:42 | | 1 | -1 |
| hg: | Lamp not detected f1= 0 f4= 0 | 1 | 1 | B36122.223 | EUREK | #223 | 12:11:43 | | 1 | -1 |
| skc: | Azimuth drive turned OFF in op | 2 | 2 | B36122.223 | EUREK | #223 | 14:49:27 | | 1 | -1 |
| pd: | Command file pd not found --- continuing | 1 | 1 | B36122.223 | EUREK | #223 | 15:44:49 | | 1 | -1 |