| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| hh: | Bad or missing hs.cfg file creating new defaults. | 2 | 5 | B22822.223 | EUREK | #223 | 02:20:55 | | 1 | -1 |
| dp: | Doing dispersion with internal HG. | 1 | 99 | B22822.223 | EUREK | #223 | 02:42:44 | | 1 | -1 |
| rl: | 2022 228 16 23 23 Reset Tepid -> Tepid from 2022 228 16 19 17 until 2022 228 16 23 17 . Counts: 1,0 | 1 | 3 | B22822.223 | EUREK | #223 | 05:53:21 | | 1 | -1 |
| rl: | 2022 228 16 23 23 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B22822.223 | EUREK | #223 | 05:53:24 | | 1 | -1 |
| rl: | 2022 228 16 23 24 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B22822.223 | EUREK | #223 | 05:53:27 | | 1 | -1 |
| rl: | 2022 228 16 35 33 Reset Warm -> Warm from 2022 228 16 35 30 until 2022 228 16 35 31 . Counts: 0,1 | 3 | 3 | B22822.223 | EUREK | #223 | 05:53:33 | | 1 | -1 |
| rl: | 2022 228 16 42 02 MAIN.C : motor initialization timed out. | 1 | 5 | B22822.223 | EUREK | #223 | 05:53:44 | | 1 | -1 |
| cfg_out: | Illegal command (cfg | 1 | 99 | B22822.223 | EUREK | #223 | 05:54:18 | | 1 | -1 |
| ab_sk: | HOME key pressed | 1 | 99 | B22822.223 | EUREK | #223 | 16:42:24 | | 1 | -1 |
| az: | Azimuth discrepancy = -195 | 1 | 99 | B22822.223 | EUREK | #223 | 17:16:09 | -195 | -30 | 30 |
| si: | New SI, HC = 8, NC = 470 Old = 6 , 430 | 1 | 99 | B22822.223 | EUREK | #223 | 18:16:35 | | 1 | -1 |