| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2020 232 06 05 59 Motor #3: appears stuck with a reference sensor activated. | 3 | 1 | B23620.223 | EUREK | #223 | 05:53:46 | 1 | -1 | |
| rl: | 2020 236 20 13 05 New value set for watermark LOOP.RUN.TIME: 674.000025 millisec. | 7 | 3 | B23620.223 | EUREK | #223 | 05:53:53 | 1 | -1 | |
| rl: | 2020 236 20 13 05 New value set for watermark LOOP.RUN.TIME: 674.000025 millisec. | 7 | 3 | B23620.223 | EUREK | #223 | 05:53:53 | 1 | -1 | |
| rl: | 2020 236 05 31 46 PMT counter failure | 1 | 1 | B23620.223 | EUREK | #223 | 05:54:08 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 223 | 2020236 | 2 | 1027.0 |
| Serial | YYYYJJJ | HP large | max correction |
|---|---|---|---|
| 223 | 2020236 | 1 | 37.8 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| zs: | ZS intensity too low ( 480/cy), skipping. | 1 | 99 | B23620.223 | EUREK | #223 | 05:16:28 | 1 | -1 | |
| rl: | 2020 232 06 05 58 Reset Tepid -> Tepid from 2020 232 00 07 49 until 2020 232 06 05 53 . Counts: 1,0 | 1 | 3 | B23620.223 | EUREK | #223 | 05:53:43 | 1 | -1 | |
| rl: | 2020 232 06 05 59 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B23620.223 | EUREK | #223 | 05:53:46 | 1 | -1 | |
| rl: | 2020 232 06 05 59 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B23620.223 | EUREK | #223 | 05:53:48 | 1 | -1 | |
| cfg_out: | Illegal command (cfg | 1 | 99 | B23620.223 | EUREK | #223 | 05:54:15 | 1 | -1 |
| _jday | _loc | _serial | _skc | aode | ds | ed | fz | hg | hp | sl | uv | zs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 236 | EUREKA PEARL | #223 | ecsc | 7 | 7 | 1 | 8 | 5 | 4 | 3 | 30 | 44 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 12.8 | 2.0 |