| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2020 226 06 04 32 Motor #2: appears stuck with a reference sensor activated. | 2 | 1 | B23020.223 | EUREK | #223 | 06:00:53 | 1 | -1 | |
| rl: | 2020 226 06 33 11 New value set for watermark LOOP.RUN.TIME: 655.000019 millisec. | 7 | 3 | B23020.223 | EUREK | #223 | 06:00:57 | 1 | -1 | |
| rl: | 2020 226 06 33 11 New value set for watermark LOOP.RUN.TIME: 655.000019 millisec. | 7 | 3 | B23020.223 | EUREK | #223 | 06:00:57 | 1 | -1 | |
| rl: | 2020 226 07 12 59 PMT counter failure | 1 | 1 | B23020.223 | EUREK | #223 | 06:01:08 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 223 | 2020230 | 2 | 8.2 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| zs: | ZS intensity too low ( 496/cy), skipping. | 3 | 99 | B23020.223 | EUREK | #223 | 05:14:11 | 1 | -1 | |
| rl: | 2020 226 06 03 23 Reset Warm -> Tepid from 2020 226 06 03 17 until 2020 226 06 03 18 . Counts: 1,0 | 1 | 3 | B23020.223 | EUREK | #223 | 06:00:50 | 1 | -1 | |
| cfg_out: | Illegal command (cfg | 1 | 99 | B23020.223 | EUREK | #223 | 06:01:19 | 1 | -1 | |
| zs: | ZS measurement terminated | 1 | 5 | B23020.223 | EUREK | #223 | 10:11:37 | 1 | -1 | |
| zs: | Going to menu | 2 | 99 | B23020.223 | EUREK | #223 | 10:11:39 | 1 | -1 | |
| ux: | UV extended scan aborted | 1 | 3 | B23020.223 | EUREK | #223 | 10:14:35 | 1 | -1 | |
| ds: | DS intensity too high ( 220424/cy) quitting. | 1 | 99 | B23020.223 | EUREK | #223 | 15:59:51 | 1 | -1 |
| _jday | _loc | _serial | _skc | aode | ds | ed | fz | hg | hp | sl | uv | zs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 230 | EUREKA PEARL | #223 | ecsc | 94 | 95 | 1 | 8 | 7 | 5 | 4 | 68 | 26 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 12.9 | 2.1 |