| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2020 106 06 02 57 Motor #2: appears stuck with a reference sensor activated. | 2 | 1 | B10720.223 | EUREK | #223 | 05:56:07 | 1 | -1 | |
| rl: | 2020 107 09 04 21 PMT counter failure | 1 | 1 | B10720.223 | EUREK | #223 | 05:56:20 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 223 | 2020107 | 2 | 5.3 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2020 106 06 01 47 Reset Warm -> Tepid from 2020 106 06 01 41 until 2020 106 06 01 42 . Counts: 1,0 | 1 | 3 | B10720.223 | EUREK | #223 | 05:56:05 | 1 | -1 | |
| rl: | 2020 106 06 25 08 New value set for watermark LOOP.RUN.TIME: 680.000019 millisec. | 4 | 3 | B10720.223 | EUREK | #223 | 05:56:12 | 1 | -1 | |
| rl: | 2020 106 06 25 08 New value set for watermark LOOP.RUN.TIME: 680.000019 millisec. | 4 | 3 | B10720.223 | EUREK | #223 | 05:56:12 | 1 | -1 | |
| cfg_out: | Illegal command (cfg | 1 | 99 | B10720.223 | EUREK | #223 | 05:56:27 | 1 | -1 | |
| zs: | ZS intensity too low ( 335/cy), skipping. | 4 | 99 | B10720.223 | EUREK | #223 | 07:13:48 | 1 | -1 |
| _jday | _loc | _serial | _skc | aode | ds | dt | ed | fz | hg | hp | rs | sl | uv | zs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 107 | EUREKA PEARL | #223 | ecsc | 79 | 79 | 1 | 1 | 24 | 7 | 5 | 1 | 6 | 80 | 44 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 5.9 | 0.9 |