| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2020 101 06 06 20 Motor #2: appears stuck with a reference sensor activated. | 2 | 1 | B10220.223 | EUREK | #223 | 05:58:12 | 1 | -1 | |
| rl: | 2020 101 06 23 12 New value set for watermark LOOP.RUN.TIME: 680.999994 millisec. | 6 | 3 | B10220.223 | EUREK | #223 | 05:58:16 | 1 | -1 | |
| rl: | 2020 101 06 23 12 New value set for watermark LOOP.RUN.TIME: 680.999994 millisec. | 6 | 3 | B10220.223 | EUREK | #223 | 05:58:16 | 1 | -1 | |
| rl: | 2020 101 07 14 25 PMT counter failure | 1 | 1 | B10220.223 | EUREK | #223 | 05:58:29 | 1 | -1 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2020 101 06 05 11 Reset Warm -> Tepid from 2020 101 06 05 05 until 2020 101 06 05 06 . Counts: 1,0 | 1 | 3 | B10220.223 | EUREK | #223 | 05:58:09 | 1 | -1 | |
| cfg_out: | Illegal command (cfg | 1 | 99 | B10220.223 | EUREK | #223 | 05:58:36 | 1 | -1 | |
| zs: | ZS intensity too low ( 240/cy), skipping. | 3 | 99 | B10220.223 | EUREK | #223 | 08:12:47 | 1 | -1 |
| _jday | _loc | _serial | _skc | aode | ds | dt | ed | fz | hg | hp | rs | sl | uv | zs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 102 | EUREKA PEARL | #223 | ecsc | 84 | 84 | 1 | 1 | 19 | 6 | 5 | 1 | 5 | 77 | 41 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 6.8 | 1.0 |