| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2020 100 06 02 02 Motor #2: appears stuck with a reference sensor activated. | 2 | 1 | B10120.223 | EUREK | #223 | 06:02:07 | 1 | -1 | |
| rl: | 2020 100 06 18 52 New value set for watermark LOOP.RUN.TIME: 674.000025 millisec. | 7 | 3 | B10120.223 | EUREK | #223 | 06:02:12 | 1 | -1 | |
| rl: | 2020 100 06 18 52 New value set for watermark LOOP.RUN.TIME: 674.000025 millisec. | 7 | 3 | B10120.223 | EUREK | #223 | 06:02:12 | 1 | -1 | |
| rl: | 2020 100 06 43 54 PMT counter failure | 1 | 1 | B10120.223 | EUREK | #223 | 06:02:25 | 1 | -1 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2020 100 06 00 52 Reset Warm -> Tepid from 2020 100 06 00 46 until 2020 100 06 00 47 . Counts: 1,0 | 1 | 3 | B10120.223 | EUREK | #223 | 06:02:05 | 1 | -1 | |
| cfg_out: | Illegal command (cfg | 1 | 99 | B10120.223 | EUREK | #223 | 06:02:34 | 1 | -1 | |
| zs: | ZS intensity too low ( 419/cy), skipping. | 1 | 99 | B10120.223 | EUREK | #223 | 09:12:50 | 1 | -1 |
| _jday | _loc | _serial | _skc | aode | ds | dt | ed | fz | hg | hp | rs | sl | uv | zs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 101 | EUREKA PEARL | #223 | ecsc | 84 | 84 | 1 | 1 | 20 | 6 | 5 | 1 | 5 | 79 | 33 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 6.4 | 0.9 |