| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2019 212 06 05 49 Motor #2: appears stuck with a reference sensor activated. | 2 | 1 | B21319.223 | EUREK | #223 | 06:02:45 | 1 | -1 | |
| rl: | 2019 212 07 10 49 PMT counter failure | 1 | 1 | B21319.223 | EUREK | #223 | 06:02:55 | 1 | -1 |
| Serial | YYYYJJJ | SL Current | SL Voltage |
|---|---|---|---|
| 223 | 2019206 | -12.18 | 24.37 |
| 223 | 2019207 | -12.18 | 24.37 |
| 223 | 2019208 | -12.17 | 24.4 |
| 223 | 2019209 | -12.18 | 24.37 |
| 223 | 2019210 | -12.17 | 24.4 |
| 223 | 2019211 | -12.17 | 24.4 |
| 223 | 2019212 | -12.17 | 24.4 |
| 223 | 2019213 | -12.17 | 24.37 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2019 212 06 04 40 Reset Warm -> Tepid from 2019 212 06 04 34 until 2019 212 06 04 35 . Counts: 1,0 | 1 | 3 | B21319.223 | EUREK | #223 | 06:02:42 | 1 | -1 | |
| rl: | 2019 212 06 25 41 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 3 | 3 | B21319.223 | EUREK | #223 | 06:02:49 | 1 | -1 | |
| rl: | 2019 212 06 25 41 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 3 | 3 | B21319.223 | EUREK | #223 | 06:02:49 | 1 | -1 | |
| cfg_out: | Illegal command (cfg | 1 | 99 | B21319.223 | EUREK | #223 | 06:03:02 | 1 | -1 | |
| ds: | DS intensity too high ( 204265/cy) quitting. | 1 | 99 | B21319.223 | EUREK | #223 | 20:55:04 | 1 | -1 |
| _jday | _loc | _serial | _skc | aode | ds | dt | ed | hg | hp | rs | sl | uv | zs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 213 | EUREKA PEARL | #223 | ecsc | 79 | 80 | 1 | 1 | 5 | 5 | 1 | 4 | 70 | 56 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 7.5 | 1.1 |