| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2018 307 05 19 53 Motor #2: appears stuck with a reference sensor activated. | 3 | 1 | B30818.223 | TORON | #223 | 05:09:17 | 1 | -1 | |
| rl: | 2018 307 05 41 46 New value set for watermark LOOP.RUN.TIME: 669.000006 millisec. | 8 | 3 | B30818.223 | TORON | #223 | 05:09:22 | 1 | -1 | |
| rl: | 2018 307 05 41 46 New value set for watermark LOOP.RUN.TIME: 669.000006 millisec. | 8 | 3 | B30818.223 | TORON | #223 | 05:09:22 | 1 | -1 | |
| rl: | 2018 308 13 25 25 PMT counter failure | 1 | 1 | B30818.223 | TORON | #223 | 05:09:43 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 223 | 2018308 | 1 | 16.3 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2018 307 05 18 45 Reset Warm -> Tepid from 2018 307 05 18 39 until 2018 307 05 18 40 . Counts: 1,0 | 1 | 3 | B30818.223 | TORON | #223 | 05:09:15 | 1 | -1 | |
| cfg_out: | Illegal command (cfg | 1 | 99 | B30818.223 | TORON | #223 | 05:09:49 | 1 | -1 | |
| ds: | DS intensity too high ( 223459/cy) quitting. | 1 | 99 | B30818.223 | TORON | #223 | 18:30:52 | 1 | -1 | |
| sc: | SC intensity too low ( 195/cy), skipping. | 2 | 3 | B30818.223 | TORON | #223 | 19:03:26 | 1 | -1 |
| _jday | _loc | _serial | _skc | ds | dt | ed | fz | hg | hp | rs | sl | uv | zs |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 308 | TORONTO | #223 | calsc | 53 | 2 | 1 | 9 | 21 | 20 | 2 | 9 | 17 | 23 |
| Operator | Serial |
|---|---|
| RS | 223 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 14.0 | 2.0 |