| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2018 270 13 27 27 Reset Tepid -> Tepid from 2018 270 13 26 34 until 2018 270 13 27 22 . Counts: 1,0 | 1 | 3 | B27018.223 | TORON | #223 | 05:15:53 | | 1 | -1 |
| rl: | 2018 270 13 27 28 New value set for watermark MOISTURE.HIGH: 10.420038 . | 3 | 3 | B27018.223 | TORON | #223 | 05:15:55 | | 1 | -1 |
| rl: | 2018 270 13 27 28 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B27018.223 | TORON | #223 | 05:15:57 | | 1 | -1 |
| rl: | 2018 270 13 27 28 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B27018.223 | TORON | #223 | 05:16:00 | | 1 | -1 |
| rl: | 2018 270 13 27 58 Reset Warm -> Warm from 2018 270 13 27 55 until 2018 270 13 27 55 . Counts: 1,1 | 1 | 3 | B27018.223 | TORON | #223 | 05:16:03 | | 1 | -1 |
| rl: | 2018 270 13 44 58 New value set for watermark LOOP.RUN.TIME: 791.999960 millisec. | 1 | 3 | B27018.223 | TORON | #223 | 05:16:09 | | 1 | -1 |
| cfg_out: | Illegal command (cfg | 1 | 99 | B27018.223 | TORON | #223 | 05:16:17 | | 1 | -1 |
| ds: | HOME key pressed | 2 | 99 | B27018.223 | TORON | #223 | 13:03:03 | | 1 | -1 |
| ds: | Going to menu | 2 | 99 | B27018.223 | TORON | #223 | 13:03:07 | | 1 | -1 |
| re: | Azimuth discrepancy = 3982 | 1 | 99 | B27018.223 | TORON | #223 | 13:27:30 | 3982 | -30 | 30 |
| ds: | DS intensity too high ( 424052/cy) quitting. | 2 | 99 | B27018.223 | TORON | #223 | 18:14:58 | | 1 | -1 |
| sc: | SC intensity too low ( 219/cy), skipping. | 2 | 3 | B27018.223 | TORON | #223 | 20:41:24 | | 1 | -1 |