| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| ci: | Going to menu | 2 | 99 | B08518.223 | Delft | #223 | 07:53:05 | | 1 | -1 |
| ci: | HOME key pressed | 2 | 99 | B08518.223 | Delft | #223 | 07:53:07 | | 1 | -1 |
| hg: | DEL key pressed | 2 | 99 | B08518.223 | Delft | #223 | 07:59:52 | | 1 | -1 |
| ls: | Illegal command (ls) in schedule dsmk3ec2, ignoring | 1 | 99 | B08518.223 | Delft | #223 | 08:50:13 | | 1 | -1 |
| ds: | DS intensity too high ( 553225/cy) quitting. | 1 | 99 | B08518.223 | Delft | #223 | 10:45:45 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B08518.223 | Delft | #223 | 14:11:40 | | 1 | -1 |
| fr: | Micrometer #1 discrepancy= 13 Now set to o3 offset = 0 | 1 | 99 | B08518.223 | Delft | #223 | 18:21:18 | 13 | -10 | 10 |
| rl: | 2018 085 09 32 31 Reset Tepid -> Tepid from 2018 085 09 27 36 until 2018 085 09 32 26 . Counts: 1,0 | 1 | 3 | B08518.223 | Delft | #223 | 23:48:21 | | 1 | -1 |
| rl: | 2018 085 09 32 32 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B08518.223 | Delft | #223 | 23:48:23 | | 1 | -1 |
| rl: | 2018 085 09 32 32 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B08518.223 | Delft | #223 | 23:48:25 | | 1 | -1 |
| rl: | 2018 085 09 33 17 Motor #9: appears stuck with a reference sensor activated. | 3 | 3 | B08518.223 | Delft | #223 | 23:48:27 | | 1 | -1 |
| chk_cfg: | MOTOR.MAX.JERK[10]=(symbol not found) | 2 | 3 | B08518.223 | Delft | #223 | 23:48:44 | | 1 | -1 |