| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| hg: | Lamp not detected f1= 0 f4= 31 | 2 | 1 | B02418.223 | Delft | #223 | 06:18:53 | 1 | -1 | |
| hg: | Lamp not on... hg test terminated F1= 0 F4= 31 | 3 | 1 | B02418.223 | Delft | #223 | 06:18:53 | 1 | -1 | |
| sl: | SL lamp is dead: the current is 0 | 1 | 1 | B02418.223 | Delft | #223 | 21:58:58 | 1 | -1 | |
| rl: | 2018 024 00 11 42 Motor #2: appears stuck with a reference sensor activated. | 3 | 1 | B02418.223 | Delft | #223 | 23:55:03 | 1 | -1 | |
| rl: | 2018 024 00 30 14 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 10 | 3 | B02418.223 | Delft | #223 | 23:55:05 | 1 | -1 | |
| rl: | 2018 024 00 30 14 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 10 | 3 | B02418.223 | Delft | #223 | 23:55:05 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 223 | 2018024 | 9 | 28.0 |
| Serial | YYYYJJJ | HP large | max correction |
|---|---|---|---|
| 223 | 2018024 | 6 | 60.3 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| td: | Time correction 3.4 seconds | 1 | 3 | B02418.223 | Delft | #223 | 02:10:08 | 3.4 | -3 | 3 |
| rl: | 2018 024 00 10 49 Reset Warm -> Tepid from 2018 024 00 10 43 until 2018 024 00 10 43 . Counts: 1,0 | 1 | 3 | B02418.223 | Delft | #223 | 23:55:02 | 1 | -1 | |
| chk_cfg: | MOTOR.MAX.JERK[10]=(symbol not found) | 2 | 3 | B02418.223 | Delft | #223 | 23:55:26 | 1 | -1 |
| _jday | _loc | _serial | _skc | dt | ed | hg | hp | rs | sl | uv |
|---|---|---|---|---|---|---|---|---|---|---|
| 024 | Delft | #223 | dsmk3ec | 9 | 1 | 31 | 30 | 9 | 33 | 6 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 21.7 | 2.9 |