| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| hg: | Lamp not detected f1= 0 f4= 53 | 3 | 1 | B01618.223 | Delft | #223 | 00:48:42 | 1 | -1 | |
| hg: | Lamp not on... hg test terminated F1= 0 F4= 53 | 4 | 1 | B01618.223 | Delft | #223 | 00:48:42 | 1 | -1 | |
| sl: | SL lamp is dead: the current is 0 | 1 | 1 | B01618.223 | Delft | #223 | 21:43:13 | 1 | -1 | |
| rl: | 2018 016 00 09 09 Motor #2: appears stuck with a reference sensor activated. | 3 | 1 | B01618.223 | Delft | #223 | 23:52:47 | 1 | -1 | |
| rl: | 2018 016 00 22 56 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 7 | 3 | B01618.223 | Delft | #223 | 23:52:50 | 1 | -1 | |
| rl: | 2018 016 00 22 56 New value set for watermark LOOP.RUN.TIME: 699.000025 millisec. | 7 | 3 | B01618.223 | Delft | #223 | 23:52:50 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 223 | 2018016 | 3 | 22.4 |
| Serial | YYYYJJJ | HP large | max correction |
|---|---|---|---|
| 223 | 2018016 | 5 | 58.4 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| td: | Time correction 3.1 seconds | 1 | 3 | B01618.223 | Delft | #223 | 00:43:48 | 3.1 | -3 | 3 |
| rl: | 2018 016 00 08 18 Reset Warm -> Tepid from 2018 016 00 08 12 until 2018 016 00 08 13 . Counts: 1,0 | 1 | 3 | B01618.223 | Delft | #223 | 23:52:46 | 1 | -1 | |
| chk_cfg: | MOTOR.MAX.JERK[10]=(symbol not found) | 2 | 3 | B01618.223 | Delft | #223 | 23:53:06 | 1 | -1 |
| _jday | _loc | _serial | _skc | ds | dt | ed | hg | hp | rs | sl | uv |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 016 | Delft | #223 | dsmk3ec | 4 | 9 | 1 | 26 | 28 | 9 | 33 | 6 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 19.5 | 1.8 |