| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| sl: | Lamp not on... sl test terminated F1= 0 F4= 0 | 2 | 1 | B01318.223 | Delft | #223 | 21:38:14 | 1 | -1 | |
| sl: | SL lamp is dead: the current is 0 | 1 | 1 | B01318.223 | Delft | #223 | 21:38:14 | 1 | -1 | |
| hg: | Lamp not detected f1= 0 f4= 322 | 1 | 1 | B01318.223 | Delft | #223 | 22:16:09 | 1 | -1 | |
| rl: | 2018 013 00 08 38 Motor #2: appears stuck with a reference sensor activated. | 3 | 1 | B01318.223 | Delft | #223 | 23:51:44 | 1 | -1 | |
| rl: | 2018 013 00 30 49 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 8 | 3 | B01318.223 | Delft | #223 | 23:51:46 | 1 | -1 | |
| rl: | 2018 013 00 30 49 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 8 | 3 | B01318.223 | Delft | #223 | 23:51:46 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 223 | 2018013 | 7 | 12.0 |
| Serial | YYYYJJJ | HP large | max correction |
|---|---|---|---|
| 223 | 2018013 | 1 | 33.0 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| td: | Time correction 3.4 seconds | 1 | 3 | B01318.223 | Delft | #223 | 00:37:17 | 3.4 | -3 | 3 |
| rl: | 2018 013 00 07 47 Reset Warm -> Tepid from 2018 013 00 07 41 until 2018 013 00 07 42 . Counts: 1,0 | 1 | 3 | B01318.223 | Delft | #223 | 23:51:43 | 1 | -1 | |
| chk_cfg: | MOTOR.MAX.JERK[10]=(symbol not found) | 2 | 3 | B01318.223 | Delft | #223 | 23:52:04 | 1 | -1 |
| _jday | _loc | _serial | _skc | dt | ed | hg | hp | rs | sl | uv |
|---|---|---|---|---|---|---|---|---|---|---|
| 013 | Delft | #223 | dsmk3ec | 9 | 1 | 28 | 25 | 9 | 35 | 6 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 223 | 16.5 | 1.6 |