| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| re: | Azimuth discrepancy = 1639 | 1 | 99 | B13324.206 | SATUR | #206 | 00:03:57 | 1639 | -30 | 30 |
| si: | New SI, HC = 14, NC = 1960 Old = 6 , 1950 | 1 | 99 | B13324.206 | SATUR | #206 | 00:07:46 | | 1 | -1 |
| ds: | DS intensity too low ( 162/cy), skipping. | 3 | 99 | B13324.206 | SATUR | #206 | 01:41:28 | | 1 | -1 |
| sc: | SC intensity too low ( 6/cy), skipping. | 1 | 3 | B13324.206 | SATUR | #206 | 01:47:10 | | 1 | -1 |
| zs: | ZS measurement terminated | 1 | 5 | B13324.206 | SATUR | #206 | 02:00:35 | | 1 | -1 |
| zs: | ZS intensity too low ( 1/cy), skipping. | 3 | 99 | B13324.206 | SATUR | #206 | 07:11:07 | | 1 | -1 |
| rl: | 2024 134 00 02 22 Checksum bad in low level command. | 1 | 3 | B13324.206 | SATUR | #206 | 08:14:28 | | 1 | -1 |
| rl: | 2024 134 00 02 22 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B13324.206 | SATUR | #206 | 08:14:30 | | 1 | -1 |
| rl: | 2024 134 00 02 23 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B13324.206 | SATUR | #206 | 08:14:34 | | 1 | -1 |
| rl: | 2024 134 02 45 19 Attempt to exceed min boundary | 1 | 3 | B13324.206 | SATUR | #206 | 08:15:07 | | 1 | -1 |
| rl: | 2024 134 02 45 19 <M,10, | 1 | 3 | B13324.206 | SATUR | #206 | 08:15:09 | | 1 | -1 |
| rl: | 2024 134 02 45 19 <M,10, | 1 | 5 | B13324.206 | SATUR | #206 | 08:15:09 | | 1 | -1 |
| hg: | DEL key pressed | 3 | 99 | B13324.206 | SATUR | #206 | 19:23:16 | | 1 | -1 |
| pd: | Going to menu | 3 | 99 | B13324.206 | SATUR | #206 | 19:43:10 | | 1 | -1 |
| dsp: | Doing dispersion test with Cd (UV port) | 2 | 99 | B13324.206 | SATUR | #206 | 21:01:50 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 1 | 1 | 99 | B13324.206 | SATUR | #206 | 23:00:19 | | 1 | -1 |
| ze: | Zenith discrepancy = 20 | 2 | 99 | B13324.206 | SATUR | #206 | 23:39:50 | 20 | -10 | 10 |