| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2018 139 18 40 20 Reset No -> Tepid from 2018 139 18 26 09 until 2042 103 12 11 59 . Counts: 1,0 | 1 | 3 | B13918.206 | SATUR | #206 | 08:18:34 | | 1 | -1 |
| rl: | 2018 139 18 40 20 Checksum bad in low level command. | 1 | 3 | B13918.206 | SATUR | #206 | 08:18:35 | | 1 | -1 |
| rl: | 2018 139 18 40 21 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B13918.206 | SATUR | #206 | 08:18:37 | | 1 | -1 |
| rl: | 2018 139 18 40 21 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B13918.206 | SATUR | #206 | 08:18:40 | | 1 | -1 |
| rl: | 2018 139 18 42 29 MAIN.C : motor initialization timed out. | 1 | 5 | B13918.206 | SATUR | #206 | 08:18:42 | | 1 | -1 |
| rl: | 2018 139 02 25 32 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 1 | 3 | B13918.206 | SATUR | #206 | 08:18:46 | | 1 | -1 |
| rl: | 2018 139 02 25 32 New value set for watermark LOOP.RUN.TIME: 659.000015 millisec. | 1 | 3 | B13918.206 | SATUR | #206 | 08:18:46 | | 1 | -1 |
| dsp: | Doing dispersion test with Hg (UV port) | 1 | 99 | B13918.206 | SATUR | #206 | 14:25:55 | | 1 | -1 |
| re: | Azimuth discrepancy = -16000 | 1 | 99 | B13918.206 | SATUR | #206 | 15:37:46 | -16000 | -30 | 30 |
| ze: | Zenith discrepancy = 1507 | 1 | 99 | B13918.206 | SATUR | #206 | 16:18:24 | 1507 | -10 | 10 |
| pz: | HOME key pressed | 2 | 99 | B13918.206 | SATUR | #206 | 16:29:02 | | 1 | -1 |
| pz: | Going to menu | 2 | 99 | B13918.206 | SATUR | #206 | 16:29:04 | | 1 | -1 |
| si: | New SI, HC = 22, NC = -2965 Old = 13 , -2950 | 2 | 99 | B13918.206 | SATUR | #206 | 19:05:15 | | 1 | -1 |
| sc: | Suppressed oscillation of filter wheel. | 1 | 5 | B13918.206 | SATUR | #206 | 21:29:22 | | 1 | -1 |