Analysing b-file records for potential instrument or data problems.

Database last updated on Thu, 29 Jan 2026 07:10:50 +0000 by localhost

Critical warnings from b-files' comments for days between 2024352 and 2024352 (0 sec, 13 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
rl:	2024 350 14 51 49 Motor #3: appears stuck with a reference sensor activated.	29	1	B35224.204	GOOSE	#204	04:05:27		1	-1
rl:	2024 350 14 51 50 Motor #10: appears stuck with a reference sensor activated.	23	3	B35224.204	GOOSE	#204	04:05:29		1	-1
rl:	2024 352 12 44 42 Attempt to exceed max boundary	16	3	B35224.204	GOOSE	#204	04:06:58		1	-1
rl:	2024 352 12 44 42 <M,10,-1:M,10,501>	16	3	B35224.204	GOOSE	#204	04:07:00		1	-1
rl:	2024 352 12 44 42 <M,10,-1:M,10,501>	16	5	B35224.204	GOOSE	#204	04:07:00		1	-1
rl:	2024 352 13 10 57 New value set for watermark LOOP.RUN.TIME: 683.000040 millisec.	6	3	B35224.204	GOOSE	#204	04:07:59		1	-1
rl:	2024 352 13 10 57 New value set for watermark LOOP.RUN.TIME: 683.000040 millisec.	6	3	B35224.204	GOOSE	#204	04:07:59		1	-1
rl:	2024 352 22 01 45 PMT counter failure	1	1	B35224.204	GOOSE	#204	04:08:14		1	-1
hp:	Spectrometer alignment trouble.	1	1	B35224.204	GOOSE	#204	12:08:23		1	-1
re:	Previous RE didn	1	1	B35224.204	GOOSE	#204	12:12:01		1	-1
fr:	11000 steps - QUIT - Micrometer #1 reference not found	1	1	B35224.204	GOOSE	#204	12:45:00		1	-1
hg:	Lamp not on... hg test terminated F1= 53 F4= 48	1	1	B35224.204	GOOSE	#204	13:17:29		1	-1
hg:	Lamp not detected f1= 53 f4= 48	1	1	B35224.204	GOOSE	#204	13:17:30		1	-1

Instrument constant changes for the week before 2024352 (4 sec, 0 rows)

SL burned out? (AP results when SL is ON) (0 sec, 3 rows)

Serial	YYYYJJJ	SL Current	SL Voltage
204	2024348	0	10.83
204	2024351	1.52	10.84
204	2024352	1.52	10.83

HG burned out? (AP results when HG is ON) (0 sec, 1 rows)

Hg with step corrections larger than 10 steps or multiple corrections larger than 2.5 steps (0 sec, 1 rows)

Serial	YYYYJJJ	HG large	max correction
204	2024352	2	5.3

Non-critical warnings from b-files' comments for days between 2024352 and 2024352 (1 sec, 13 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
rl:	2024 350 14 51 49 Reset Tepid -> Tepid from 2024 350 14 51 42 until 2024 350 14 51 43 . Counts: 1,0	1	3	B35224.204	GOOSE	#204	04:05:24		1	-1
rl:	2024 350 14 51 49 Motor #3: appears stuck with a reference sensor activated.	1	3	B35224.204	GOOSE	#204	04:05:27		1	-1
rl:	2024 350 14 51 50 Motor #11: appears stuck with a reference sensor activated.	2	3	B35224.204	GOOSE	#204	04:05:32		1	-1
rl:	2024 350 14 53 42 Reset Warm -> Warm from 2024 350 14 53 38 until 2024 350 14 53 39 . Counts: 1,1	1	3	B35224.204	GOOSE	#204	04:05:46		1	-1
rl:	2024 350 14 55 51 MAIN.C : motor initialization timed out.	1	5	B35224.204	GOOSE	#204	04:06:06		1	-1
rl:	2024 351 12 12 19 Reset Warm -> Warm from 2024 351 12 12 16 until 2024 351 12 12 17 . Counts: 0,1	1	3	B35224.204	GOOSE	#204	04:06:12		1	-1
rl:	2024 351 12 14 29 MAIN.C : motor initialization timed out.	1	5	B35224.204	GOOSE	#204	04:06:32		1	-1
rl:	2024 352 12 09 00 Reset Warm -> Warm from 2024 352 12 08 57 until 2024 352 12 08 57 . Counts: 0,1	1	3	B35224.204	GOOSE	#204	04:06:35		1	-1
rl:	2024 352 12 11 10 MAIN.C : motor initialization timed out.	1	5	B35224.204	GOOSE	#204	04:06:56		1	-1
pd:	Going to menu	2	99	B35224.204	GOOSE	#204	12:12:02		1	-1
si:	New SI, HC = 16, NC = -1350 Old = 16 , -1350. SZA= 87.75701	1	99	B35224.204	GOOSE	#204	12:38:01		1	-1
mm:	HOME key pressed	2	99	B35224.204	GOOSE	#204	12:49:27		1	-1
ux:	UV extended scan aborted	1	3	B35224.204	GOOSE	#204	14:25:38		1	-1

Measurements and tests summary.

_jday	_loc	_serial	_skc	aode	ds	ed	fm	fz	hg	hp	sl	uv	zs
352	GOOSE BAY	#204	menu,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 93.262)	3	3	2	13	10	15	12	4	16	30

(1 sec)

Relative and absolute humidity for day 2024352 (2 sec, 1 rows)

Serial	RH, %	AH, g/m3	7-day RH history	Des-nt replcd days ago
204	8.0	1.2