| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2023 011 21 59 55 Motor #3: appears stuck with a reference sensor activated. | 2 | 1 | B01123.204 | GOOSE | #204 | 04:23:10 | 1 | -1 | |
| rl: | 2023 011 22 40 14 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 5 | 3 | B01123.204 | GOOSE | #204 | 04:23:15 | 1 | -1 | |
| rl: | 2023 011 22 40 14 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 5 | 3 | B01123.204 | GOOSE | #204 | 04:23:15 | 1 | -1 | |
| rl: | 2023 011 23 40 06 PMT counter failure | 1 | 1 | B01123.204 | GOOSE | #204 | 04:23:26 | 1 | -1 | |
| skc: | Azimuth drive turned OFF in op | 6 | 2 | B01123.204 | GOOSE | #204 | 11:03:33 | 1 | -1 | |
| hp: | Spectrometer alignment trouble. | 1 | 1 | B01123.204 | GOOSE | #204 | 19:43:42 | 1 | -1 | |
| sl: | Lamp not on... sl test terminated F1= 0 F4= 319 | 9 | 1 | B01123.204 | GOOSE | #204 | 19:57:00 | 1 | -1 | |
| pd: | Command file pd not found --- continuing | 1 | 1 | B01123.204 | GOOSE | #204 | 22:08:04 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 204 | 2023011 | 6 | 5.3 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2023 011 21 59 54 Reset Tepid -> Tepid from 2023 011 21 03 38 until 2023 011 21 59 49 . Counts: 1,0 | 1 | 3 | B01123.204 | GOOSE | #204 | 04:23:07 | 1 | -1 | |
| rl: | 2023 011 21 59 55 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B01123.204 | GOOSE | #204 | 04:23:10 | 1 | -1 | |
| rl: | 2023 011 21 59 55 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B01123.204 | GOOSE | #204 | 04:23:13 | 1 | -1 | |
| rl: | 2023 011 22 40 14 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 4 | 3 | B01123.204 | GOOSE | #204 | 04:23:15 | 1 | -1 | |
| rl: | 2023 011 22 40 14 New value set for watermark LOOP.RUN.TIME: 673.000050 millisec. | 4 | 3 | B01123.204 | GOOSE | #204 | 04:23:15 | 1 | -1 | |
| rl: | 2023 012 01 11 25 New value set for watermark LOOP.RUN.TIME: 794.999981 millisec. | 1 | 3 | B01123.204 | GOOSE | #204 | 04:23:29 | 1 | -1 | |
| rl: | 2023 012 01 11 25 New value set for watermark LOOP.RUN.TIME: 794.999981 millisec. | 1 | 3 | B01123.204 | GOOSE | #204 | 04:23:29 | 1 | -1 | |
| si: | User confirmed doing sighting without azimuth tracker. | 1 | 10 | B01123.204 | GOOSE | #204 | 22:06:30 | 1 | -1 | |
| si: | New SI, HC = 31, NC = -1385 Old = 41 , -1385 | 1 | 99 | B01123.204 | GOOSE | #204 | 22:07:13 | 1 | -1 | |
| pd: | Command file pd not found --- continuing | 1 | 99 | B01123.204 | GOOSE | #204 | 22:08:04 | continuing | 1 | -1 |
| az: | Azimuth discrepancy = 750 | 1 | 99 | B01123.204 | GOOSE | #204 | 22:21:38 | 750 | -30 | 30 |
| _jday | _loc | _serial | _skc | dt | ed | fm | hg | hp | rs | sl |
|---|---|---|---|---|---|---|---|---|---|---|
| 011 | GOOSE BAY | #204 | Azimuth drive turned OFF in op,HOME key pressed,inside,menu,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 107.318),Next schedule will be ecsc (now ecsc ZS= 93 ZS= 143.349),Starting schedule ecsc | 3 | 2 | 3 | 26 | 25 | 3 | 4 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 204 | 9.3 | 1.9 |