| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2022 358 16 33 23 Reset Tepid -> Tepid from 2022 358 14 41 48 until 2022 358 16 33 18 . Counts: 1,0 | 1 | 3 | B35822.204 | GOOSE | #204 | 04:05:49 | | 1 | -1 |
| rl: | 2022 358 16 33 24 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B35822.204 | GOOSE | #204 | 04:05:51 | | 1 | -1 |
| rl: | 2022 358 16 34 44 Reset Warm -> Warm from 2022 358 16 34 40 until 2022 358 16 34 41 . Counts: 0,1 | 1 | 3 | B35822.204 | GOOSE | #204 | 04:05:54 | | 1 | -1 |
| rl: | 2022 358 16 34 45 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B35822.204 | GOOSE | #204 | 04:05:57 | | 1 | -1 |
| rl: | 2022 358 16 36 24 Bad command string. Command string buffer cleared. | 1 | 3 | B35822.204 | GOOSE | #204 | 04:06:00 | | 1 | -1 |
| rl: | 2022 358 16 36 24 Bad command string. Command string buffer cleared. | 1 | 3 | B35822.204 | GOOSE | #204 | 04:06:00 | | 1 | -1 |
| rl: | 2022 358 16 36 24 < | 1 | 3 | B35822.204 | GOOSE | #204 | 04:06:01 | | 1 | -1 |
| rl: | 2022 358 17 21 06 New value set for watermark LOOP.RUN.TIME: 688.000011 millisec. | 1 | 3 | B35822.204 | GOOSE | #204 | 04:06:04 | | 1 | -1 |
| rl: | 2022 358 17 21 06 New value set for watermark LOOP.RUN.TIME: 688.000011 millisec. | 1 | 3 | B35822.204 | GOOSE | #204 | 04:06:04 | | 1 | -1 |
| zs: | ZS intensity too low ( 243/cy), skipping. | 4 | 99 | B35822.204 | GOOSE | #204 | 19:33:08 | | 1 | -1 |