| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2022 335 14 59 47 Motor #10: appears stuck with a reference sensor activated. | 131 | 1 | B33522.204 | GOOSE | #204 | 04:01:21 | 1 | -1 | |
| rl: | 2022 335 14 59 47 Motor #10: appears stuck with a reference sensor activated. | 112 | 3 | B33522.204 | GOOSE | #204 | 04:01:21 | 1 | -1 | |
| rl: | 2022 335 15 01 31 MAIN.C : motor initialization timed out. | 17 | 5 | B33522.204 | GOOSE | #204 | 04:01:37 | 1 | -1 | |
| rl: | 2022 335 15 02 40 Bad command string. Command string buffer cleared. | 17 | 3 | B33522.204 | GOOSE | #204 | 04:01:40 | 1 | -1 | |
| rl: | 2022 335 15 02 40 Bad command string. Command string buffer cleared. | 17 | 3 | B33522.204 | GOOSE | #204 | 04:01:40 | 1 | -1 | |
| rl: | 2022 335 15 02 40 <A | 21 | 3 | B33522.204 | GOOSE | #204 | 04:01:42 | 1 | -1 | |
| rl: | 2022 335 15 02 57 Reset Warm -> Warm from 2022 335 15 02 53 until 2022 335 15 02 54 . Counts: 0,1 | 19 | 3 | B33522.204 | GOOSE | #204 | 04:01:45 | 1 | -1 | |
| rl: | 2022 335 15 02 58 Motor #11: appears stuck with a reference sensor activated. | 18 | 3 | B33522.204 | GOOSE | #204 | 04:01:51 | 1 | -1 | |
| rl: | 2022 335 15 23 18 Command not accepted while another in progress. | 2 | 1 | B33522.204 | GOOSE | #204 | 04:04:36 | 1 | -1 | |
| rl: | 2022 335 21 11 57 PMT counter failure | 1 | 1 | B33522.204 | GOOSE | #204 | 04:11:00 | 1 | -1 | |
| sl: | Lamp not on... sl test terminated F1= 0 F4= 1 | 1 | 1 | B33522.204 | GOOSE | #204 | 14:51:17 | 1 | -1 | |
| hp: | Spectrometer alignment trouble. | 4 | 1 | B33522.204 | GOOSE | #204 | 14:52:46 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 204 | 2022335 | 6 | 9.1 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | Log item overwritten by later entry. | 1 | 3 | B33522.204 | GOOSE | #204 | 04:01:18 | 1 | -1 | |
| rl: | 2022 335 16 39 13 Attempt to exceed min boundary | 4 | 3 | B33522.204 | GOOSE | #204 | 04:10:26 | 1 | -1 | |
| rl: | 2022 335 16 39 13 <M,10,-7288> | 4 | 5 | B33522.204 | GOOSE | #204 | 04:10:28 | 1 | -1 | |
| rl: | 2022 335 17 41 55 MOTOR.ORIGN: Symbol not found. | 2 | 3 | B33522.204 | GOOSE | #204 | 04:10:34 | 1 | -1 | |
| rl: | 2022 335 20 43 12 New value set for watermark LOOP.RUN.TIME: 715.000010 millisec. | 2 | 3 | B33522.204 | GOOSE | #204 | 04:10:58 | 1 | -1 | |
| rl: | 2022 335 20 43 12 New value set for watermark LOOP.RUN.TIME: 715.000010 millisec. | 2 | 3 | B33522.204 | GOOSE | #204 | 04:10:58 | 1 | -1 | |
| pd: | Going to menu | 3 | 99 | B33522.204 | GOOSE | #204 | 10:51:33 | 1 | -1 | |
| fr: | Micrometer #1 reference found at step-565 (+CAL)= 449 Now set to o3 offset = 7288 | 2 | 99 | B33522.204 | GOOSE | #204 | 11:19:03 | 449 | 1000 | 9000 |
| ds: | DS intensity too low ( 1/cy), skipping. | 1 | 99 | B33522.204 | GOOSE | #204 | 14:41:48 | 1 | -1 | |
| zs: | ZS intensity too low ( 1/cy), skipping. | 1 | 99 | B33522.204 | GOOSE | #204 | 14:42:03 | 1 | -1 |
| _jday | _loc | _serial | _skc | ed | fm | hg | hp | sl | uv |
|---|---|---|---|---|---|---|---|---|---|
| 335 | GOOSE BAY | #204 | ecsc,menu,Must do HG now,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 97.162) | 2 | 12 | 11 | 8 | 2 | 2 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 204 | 8.2 | 0.6 |