| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2020 254 04 30 25 Reset No -> Tepid from 2020 254 04 30 15 until 2028 254 04 30 20 . Counts: 1,0 | 1 | 3 | B25520.204 | GOOSE | #204 | 04:08:47 | | 1 | -1 |
| rl: | 2020 254 04 30 25 Checksum bad in low level command. | 1 | 3 | B25520.204 | GOOSE | #204 | 04:08:49 | | 1 | -1 |
| rl: | 2020 254 04 30 26 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B25520.204 | GOOSE | #204 | 04:08:51 | | 1 | -1 |
| rl: | 2020 254 04 30 26 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B25520.204 | GOOSE | #204 | 04:08:53 | | 1 | -1 |
| rl: | 2020 254 04 31 38 Reset Warm -> Warm from 2020 254 04 31 35 until 2020 254 04 31 36 . Counts: 0,1 | 1 | 3 | B25520.204 | GOOSE | #204 | 04:08:56 | | 1 | -1 |
| rl: | 2020 254 04 32 04 <L,20392,101,19810,192,19811,79,19812,148> | 3 | 3 | B25520.204 | GOOSE | #204 | 04:09:11 | | 1 | -1 |
| zs: | ZS intensity too low ( 125/cy), skipping. | 2 | 99 | B25520.204 | GOOSE | #204 | 09:40:08 | | 1 | -1 |
| ds: | DS intensity too high ( 212439/cy) quitting. | 2 | 99 | B25520.204 | GOOSE | #204 | 17:19:38 | | 1 | -1 |