Analysing b-file records for potential instrument or data problems.

Critical warnings from b-files' comments for days between 2026158 and 2026158 (0 sec, 3 rows)

Type	Comment	count	priority	fname	location	serial	time	min	max
rl:	2026 158 23 34 53 Motor #3: appears stuck with a reference sensor activated.	2	1	B15826.195	STONY	#195	07:42:55	1	-1
hg:	Lamp not on... hg test terminated F1= 1 F4= 6	1	1	B15826.195	STONY	#195	18:26:11	1	-1
hg:	Lamp not detected f1= 1 f4= 6	1	1	B15826.195	STONY	#195	18:26:12	1	-1

Instrument constant changes for the week before 2026158 (2 sec, 0 rows)

Serial	YYYYJJJ	HP large	max correction
195	2026158	2	23.4

Non-critical warnings from b-files' comments for days between 2026158 and 2026158 (0 sec, 20 rows)

Type	Comment	count	priority	fname	location	serial	time	min	max
sc:	SC intensity too low ( 74/cy), skipping.	2	3	B15826.195	STONY	#195	00:23:03	1	-1
rl:	2026 158 23 34 52 Reset No -> Tepid from 2026 158 23 26 56 until 2028 158 23 34 47 . Counts: 1,0	1	3	B15826.195	STONY	#195	07:42:50	1	-1
rl:	2026 158 23 34 53 Checksum bad in low level command.	1	3	B15826.195	STONY	#195	07:42:52	1	-1
rl:	2026 158 23 34 53 Motor #3: appears stuck with a reference sensor activated.	1	3	B15826.195	STONY	#195	07:42:55	1	-1
rl:	2026 158 23 34 53 Motor #11: appears stuck with a reference sensor activated.	1	3	B15826.195	STONY	#195	07:42:57	1	-1
rl:	2026 158 23 36 15 Reset Warm -> Warm from 2026 158 23 36 11 until 2026 158 23 36 12 . Counts: 0,1	1	3	B15826.195	STONY	#195	07:43:00	1	-1
rl:	2026 158 00 57 26 New value set for watermark SUPPLY.VOLTAGE.HIGH	2	3	B15826.195	STONY	#195	07:43:03	1	-1
dp:	Doing dispersion with internal HG.	1	99	B15826.195	STONY	#195	09:31:34	1	-1
sl:	HOME key pressed	3	99	B15826.195	STONY	#195	14:06:43	1	-1
pd:	Going to menu	3	99	B15826.195	STONY	#195	14:06:47	1	-1
rl:	2026 157 07 53 00 Reset Warm -> Tepid from 2026 157 07 52 55 until 2026 157 07 52 55 . Counts: 1,0	1	3	B15826.195	STONY	#195	15:21:27	1	-1
rl:	2026 157 08 24 28 Attempt to exceed min boundary	1	3	B15826.195	STONY	#195	15:21:28	1	-1
rl:	2026 157 08 24 28 <M,9,-1740>	1	3	B15826.195	STONY	#195	15:21:30	1	-1
rl:	2026 157 08 24 28 <M,9,-1740>	1	5	B15826.195	STONY	#195	15:21:30	1	-1
rl:	2026 158 09 36 46 Attempt to exceed min boundary	2	3	B15826.195	STONY	#195	15:21:32	1	-1
rl:	2026 158 09 36 46 <M,9,-1740>	2	3	B15826.195	STONY	#195	15:21:33	1	-1
rl:	2026 158 09 36 46 <M,9,-1740>	2	5	B15826.195	STONY	#195	15:21:33	1	-1
rl:	2026 158 14 07 38 MOTOR.POS.MIN: Symbol not found.	1	3	B15826.195	STONY	#195	15:21:38	1	-1
dsp:	Doing dispersion test with Cd (UV port)	2	99	B15826.195	STONY	#195	15:22:01	1	-1
si:	New SI, HC = 6, NC = -620 Old = 6 , -620. SZA= 54.924	1	99	B15826.195	STONY	#195	23:40:59	1	-1

Measurements and tests summary.

_jday	_loc	_serial	_skc	aode	ds	dt	ed	hg	hp	rs	sl	uv	zs
158	STONY PLAIN	#195	inside,menu,Next schedule will be calsc (now calsc ZS= 90 ZS= 90.546),Next schedule will be calsc (now calsc ZS= 90 ZS= 90.953),Saving backup OP,Starting schedule calsc,Waiting until ZA = -75 now -76.1,Waiting until ZA = -80 now -80.5,Waiting until ZA = -80 now -81.8,Waiting until ZA = -80 now -83.1,Waiting until ZA = -85 now -85.9,Waiting until ZA = -85 now -87.1,Waiting until ZA = -85 now -88.2,Waiting until ZA = -85 now -89.3,Waiting until ZA = -85 now -90.8,Waiting until ZA = -85 now -91.9,Waiting until ZA = -85 now -93,Waiting until ZA = -85 now -94,Waiting until ZA = -85 now -95,Waiting until ZA = -85 now -95.9,Waiting until ZA = -85 now -96.8	34	44	3	2	42	46	3	5	5	24

(0 sec)

Database last updated on Wed, 26 Aug 2026 18:11:12 +0000 by localhost

Critical warnings from b-files' comments for days between 2026158 and 2026158 (0 sec, 3 rows)

Instrument constant changes for the week before 2026158 (2 sec, 0 rows)

SL burned out? (AP results when SL is ON) (0 sec, 6 rows)

HP with step corrections larger than 20 steps (0 sec, 1 rows)

Non-critical warnings from b-files' comments for days between 2026158 and 2026158 (0 sec, 20 rows)

Measurements and tests summary.

Relative and absolute humidity for day 2026158 (2 sec, 1 rows)