| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2026 152 07 54 41 Motor #2: appears stuck with a reference sensor activated. | 2 | 1 | B15326.195 | STONY | #195 | 07:41:28 | 1 | -1 | |
| rl: | 2026 152 08 12 51 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 9 | 3 | B15326.195 | STONY | #195 | 07:41:33 | 1 | -1 | |
| rl: | 2026 152 08 12 51 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 9 | 3 | B15326.195 | STONY | #195 | 07:41:33 | 1 | -1 | |
| rl: | 2026 152 08 56 49 Attempt to exceed min boundary | 8 | 3 | B15326.195 | STONY | #195 | 07:41:52 | 1 | -1 | |
| rl: | 2026 152 08 56 49 <M,9,-1740> | 8 | 3 | B15326.195 | STONY | #195 | 07:41:54 | 1 | -1 | |
| rl: | 2026 152 08 56 49 <M,9,-1740> | 8 | 5 | B15326.195 | STONY | #195 | 07:41:54 | 1 | -1 | |
| skc: | Azimuth drive turned OFF in op | 2 | 2 | B15326.195 | STONY | #195 | 20:19:15 | 1 | -1 |
| Serial | YYYYJJJ | HG large | max correction |
|---|---|---|---|
| 195 | 2026153 | 36 | 4.6 |
| Serial | YYYYJJJ | HP large | max correction |
|---|---|---|---|
| 195 | 2026153 | 11 | 30.0 |
| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|---|---|---|---|---|---|---|---|---|---|
| rl: | 2026 152 07 53 31 Reset Warm -> Tepid from 2026 152 07 53 25 until 2026 152 07 53 25 . Counts: 1,0 | 1 | 3 | B15326.195 | STONY | #195 | 07:41:25 | 1 | -1 | |
| rl: | 2026 152 08 56 49 Attempt to exceed min boundary | 3 | 3 | B15326.195 | STONY | #195 | 07:41:52 | 1 | -1 | |
| rl: | 2026 152 08 56 49 <M,9,-1740> | 3 | 3 | B15326.195 | STONY | #195 | 07:41:54 | 1 | -1 | |
| rl: | 2026 152 08 56 49 <M,9,-1740> | 3 | 5 | B15326.195 | STONY | #195 | 07:41:54 | 1 | -1 | |
| rl: | 2026 153 11 57 03 New value set for watermark LOOP.RUN.TIME: 719.999981 millisec. | 2 | 3 | B15326.195 | STONY | #195 | 07:42:05 | 1 | -1 | |
| rl: | 2026 153 11 57 03 New value set for watermark LOOP.RUN.TIME: 719.999981 millisec. | 2 | 3 | B15326.195 | STONY | #195 | 07:42:05 | 1 | -1 | |
| re: | Zenith discrepancy = -14 | 1 | 99 | B15326.195 | STONY | #195 | 07:54:50 | -14 | -10 | 10 |
| dp: | Doing dispersion with internal HG. | 1 | 99 | B15326.195 | STONY | #195 | 09:53:53 | 1 | -1 | |
| sc: | SC intensity too low ( 2/cy), skipping. | 2 | 3 | B15326.195 | STONY | #195 | 13:12:12 | 1 | -1 | |
| ds: | HOME key pressed | 2 | 99 | B15326.195 | STONY | #195 | 14:10:48 | 1 | -1 | |
| pd: | Going to menu | 1 | 99 | B15326.195 | STONY | #195 | 14:10:59 | 1 | -1 | |
| dsp: | Doing dispersion test with Cd (UV port) | 2 | 99 | B15326.195 | STONY | #195 | 14:12:21 | 1 | -1 |
| _jday | _loc | _serial | _skc | ds | dt | ed | hg | hp | rs | sl | zs |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 153 | STONY PLAIN | #195 | Azimuth drive turned OFF in op,calscnuv,menu,Saving backup OP,Starting schedule inside,Waiting until ZA = 85 now 62.4,Waiting until ZA = 85 now 63.9,Waiting until ZA = 85 now 65.4,Waiting until ZA = 85 now 66.9,Waiting until ZA = 85 now 68.4,Waiting until ZA = 85 now 69.8,Waiting until ZA = 85 now 71.3,Waiting until ZA = 85 now 72.7,Waiting until ZA = 85 now 74.2,Waiting until ZA = 85 now 75.6,Waiting until ZA = 85 now 77,Waiting until ZA = 85 now 78.4,Waiting until ZA = 85 now 79.8,Waiting until ZA = 85 now 81.1,Waiting until ZA = 85 now 82.4,Waiting until ZA = 85 now 83.7,Waiting until ZA = 95 now 92.1,Waiting until ZA = 95 now 93.2,Waiting until ZA = 95 now 94.2,Waiting until ZA = -90 now -90.9,Waiting until ZA = -90 now -92,Waiting until ZA = -90 now -93.1,Waiting until ZA = -90 now -94.1,Waiting until ZA = -90 now -95.1 | 104 | 11 | 2 | 37 | 43 | 11 | 13 | 166 |
| Serial | RH, % | AH, g/m3 | 7-day RH history | Des-nt replcd days ago |
|---|---|---|---|---|
| 195 | 6.5 | 2.0 |