| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2026 152 19 43 21 Reset Tepid -> Tepid from 2026 152 19 23 20 until 2026 152 19 43 15 . Counts: 1,0 | 1 | 3 | B15226.195 | STONY | #195 | 07:44:04 | | 1 | -1 |
| rl: | 2026 152 19 43 25 Reset No -> Warm from 2026 152 19 43 21 until 2026 152 19 43 22 . Counts: 1,1 | 3 | 3 | B15226.195 | STONY | #195 | 07:44:07 | | 1 | -1 |
| rl: | 2026 152 19 43 25 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B15226.195 | STONY | #195 | 07:44:10 | | 1 | -1 |
| rl: | 2026 152 19 43 26 Motor #11: appears stuck with a reference sensor activated. | 2 | 3 | B15226.195 | STONY | #195 | 07:44:13 | | 1 | -1 |
| rl: | 2026 152 19 44 51 Reset Warm -> Warm from 2026 152 19 44 47 until 2026 152 19 44 48 . Counts: 0,1 | 1 | 3 | B15226.195 | STONY | #195 | 07:44:28 | | 1 | -1 |
| rl: | 2026 152 20 35 19 Attempt to exceed min boundary | 1 | 3 | B15226.195 | STONY | #195 | 07:44:42 | | 1 | -1 |
| rl: | 2026 152 20 35 19 <M,9,-1740> | 1 | 3 | B15226.195 | STONY | #195 | 07:44:44 | | 1 | -1 |
| rl: | 2026 152 20 35 19 <M,9,-1740> | 1 | 5 | B15226.195 | STONY | #195 | 07:44:44 | | 1 | -1 |
| re: | Zenith discrepancy = -14 | 1 | 99 | B15226.195 | STONY | #195 | 07:48:31 | -14 | -10 | 10 |
| dp: | Doing dispersion with internal HG. | 1 | 99 | B15226.195 | STONY | #195 | 10:48:06 | | 1 | -1 |
| sc: | SC intensity too low ( 7/cy), skipping. | 1 | 3 | B15226.195 | STONY | #195 | 13:13:47 | | 1 | -1 |
| ab_sk: | HOME key pressed | 1 | 99 | B15226.195 | STONY | #195 | 19:48:23 | | 1 | -1 |