| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2025 135 07 48 57 Reset Warm -> Tepid from 2025 135 07 48 51 until 2025 135 07 48 52 . Counts: 1,0 | 1 | 3 | B13625.195 | STONY | #195 | 07:39:34 | | 1 | -1 |
| rl: | 2025 135 08 10 08 New value set for watermark LOOP.RUN.TIME: 700.000000 millisec. | 4 | 3 | B13625.195 | STONY | #195 | 07:39:42 | | 1 | -1 |
| rl: | 2025 135 08 10 08 New value set for watermark LOOP.RUN.TIME: 700.000000 millisec. | 4 | 3 | B13625.195 | STONY | #195 | 07:39:42 | | 1 | -1 |
| rl: | 2025 136 10 29 40 Attempt to exceed min boundary | 1 | 3 | B13625.195 | STONY | #195 | 07:39:53 | | 1 | -1 |
| rl: | 2025 136 10 29 40 <M,9,-1740> | 1 | 3 | B13625.195 | STONY | #195 | 07:39:54 | | 1 | -1 |
| rl: | 2025 136 10 29 40 <M,9,-1740> | 1 | 5 | B13625.195 | STONY | #195 | 07:39:54 | | 1 | -1 |
| rl: | 2025 136 11 47 06 Reset No -> Warm from 2025 136 11 47 02 until 2025 136 11 47 03 . Counts: 0,1 | 2 | 3 | B13625.195 | STONY | #195 | 07:39:57 | | 1 | -1 |
| rl: | 2025 136 11 47 14 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B13625.195 | STONY | #195 | 07:40:03 | | 1 | -1 |
| rl: | 2025 136 11 48 32 New value set for watermark LOOP.RUN.TIME: 831.999969 millisec. | 2 | 3 | B13625.195 | STONY | #195 | 07:40:09 | | 1 | -1 |
| rl: | 2025 136 11 48 32 New value set for watermark LOOP.RUN.TIME: 831.999969 millisec. | 2 | 3 | B13625.195 | STONY | #195 | 07:40:09 | | 1 | -1 |
| fz: | Suppressed oscillation of filter wheel. | 2 | 5 | B13625.195 | STONY | #195 | 13:26:44 | | 1 | -1 |
| sc: | SC intensity too low ( 288/cy), skipping. | 1 | 3 | B13625.195 | STONY | #195 | 16:19:47 | | 1 | -1 |