Analysing b-file records for potential instrument or data problems.

Database last updated on Tue, 27 Jan 2026 16:10:08 +0000 by localhost

Critical warnings from b-files' comments for days between 2025106 and 2025106 (0 sec, 6 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
rl:	2025 106 21 17 52 Motor #3: appears stuck with a reference sensor activated.	6	1	B10625.195	STONY	#195	07:43:39		1	-1
rl:	2025 106 21 53 22 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	5	3	B10625.195	STONY	#195	07:43:58		1	-1
rl:	2025 106 21 53 22 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec.	5	3	B10625.195	STONY	#195	07:43:58		1	-1
hg:	Lamp not on... hg test terminated F1= 2 F4= 93	1	1	B10625.195	STONY	#195	12:43:55		1	-1
hg:	Lamp not detected f1= 2 f4= 93	1	1	B10625.195	STONY	#195	12:43:56		1	-1
si:	Azimuth drive turned OFF in op	1	2	B10625.195	STONY	#195	20:51:31		1	-1

Instrument constant changes for the week before 2025106 (1 sec, 0 rows)

SL burned out? (AP results when SL is ON) (0 sec, 8 rows)

HG burned out? (AP results when HG is ON) (0 sec, 11 rows)

Serial	YYYYJJJ	HG Current	HG Voltage
195	2025104	0	14.11
195	2025105	0.32	9.95
195	2025105	0.32	9.92
195	2025105	0	0.04
195	2025105	0.32	9.99
195	2025105	0.32	9.84
195	2025105	0.32	9.87
195	2025105	0.32	9.86
195	2025106	0.32	9.96
195	2025106	0.32	10.03
195	2025106	0.32	9.86

Hg with step corrections larger than 10 steps or multiple corrections larger than 2.5 steps (0 sec, 1 rows)

Serial	YYYYJJJ	HG large	max correction
195	2025106	18	15.8

HP with step corrections larger than 20 steps (0 sec, 1 rows)

Serial	YYYYJJJ	HP large	max correction
195	2025106	1	50.0

Non-critical warnings from b-files' comments for days between 2025106 and 2025106 (0 sec, 14 rows)

Type	Comment	count	priority	fname	location	serial	time	value	min	max
rl:	2025 106 21 17 51 Reset Tepid -> Tepid from 2025 106 21 17 37 until 2025 106 21 17 46 . Counts: 1,0	1	3	B10625.195	STONY	#195	07:43:36		1	-1
rl:	2025 106 21 17 52 Motor #3: appears stuck with a reference sensor activated.	1	3	B10625.195	STONY	#195	07:43:39		1	-1
rl:	2025 106 21 17 52 Motor #11: appears stuck with a reference sensor activated.	1	3	B10625.195	STONY	#195	07:43:42		1	-1
rl:	2025 106 21 18 54 Reset Warm -> Warm from 2025 106 21 18 51 until 2025 106 21 18 51 . Counts: 1,1	1	3	B10625.195	STONY	#195	07:43:47		1	-1
rl:	2025 106 21 18 55 Motor #9: appears stuck with a reference sensor activated.	1	3	B10625.195	STONY	#195	07:43:50		1	-1
rl:	2025 106 21 18 55 Motor #10: appears stuck with a reference sensor activated.	1	3	B10625.195	STONY	#195	07:43:53		1	-1
fz:	HOME key pressed	4	99	B10625.195	STONY	#195	12:09:14		1	-1
pd:	Going to menu	3	99	B10625.195	STONY	#195	12:09:52		1	-1
dp:	Doing dispersion with internal HG.	1	99	B10625.195	STONY	#195	12:10:14		1	-1
ux:	UV extended scan aborted	1	3	B10625.195	STONY	#195	14:20:03		1	-1
re:	Zenith discrepancy = 214	2	99	B10625.195	STONY	#195	15:26:14	214	-10	10
dsp:	Doing dispersion test with Cd (UV port)	2	99	B10625.195	STONY	#195	17:30:56		1	-1
checkhg:	Last HG had to adjust the micrometer by at least 1	2	99	B10625.195	STONY	#195	18:58:36		1	-1
si:	New SI, HC = 7, NC = -605 Old = 4 , -605. SZA= 48.116	1	99	B10625.195	STONY	#195	21:23:21		1	-1

Measurements and tests summary.

_jday	_loc	_serial	_skc	aode	ds	dt	ed	fz	hg	hp	rs	sl	uv	zs
106	STONY PLAIN	#195	Attempting recovery FR,ecsc,menu,Must do HG now (C,Next schedule will be ecsc (now ecsc ZS= 93 ZS= 94.13301),Saving backup OP,Starting schedule ecsc	30	30	3	2	3	30	6	3	6	15	11

(1 sec)

Relative and absolute humidity for day 2025106 (1 sec, 1 rows)

Serial	RH, %	AH, g/m3	7-day RH history	Des-nt replcd days ago
195	14.0	2.3