| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2023 148 21 30 41 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B14823.195 | STONY | #195 | 07:46:34 | | 1 | -1 |
| rl: | 2023 148 21 30 41 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B14823.195 | STONY | #195 | 07:46:37 | | 1 | -1 |
| rl: | 2023 148 21 33 18 MAIN.C : motor initialization timed out. | 1 | 5 | B14823.195 | STONY | #195 | 07:46:45 | | 1 | -1 |
| rl: | 2023 148 21 34 25 Bad command string. Command string buffer cleared. | 1 | 3 | B14823.195 | STONY | #195 | 07:46:49 | | 1 | -1 |
| rl: | 2023 148 21 34 25 Bad command string. Command string buffer cleared. | 1 | 3 | B14823.195 | STONY | #195 | 07:46:49 | | 1 | -1 |
| rl: | 2023 148 21 34 25 <^H> | 1 | 3 | B14823.195 | STONY | #195 | 07:46:51 | | 1 | -1 |
| dp: | Doing dispersion with internal HG. | 1 | 99 | B14823.195 | STONY | #195 | 09:58:38 | | 1 | -1 |
| pd: | Command file pd not found | 1 | 99 | B14823.195 | STONY | #195 | 13:16:28 | found | 1 | -1 |
| ua: | DEL key pressed | 1 | 99 | B14823.195 | STONY | #195 | 17:09:05 | | 1 | -1 |
| dsp: | Doing dispersion test with Cd (UV port) | 2 | 99 | B14823.195 | STONY | #195 | 18:05:08 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 1 | 2 | 99 | B14823.195 | STONY | #195 | 19:27:24 | | 1 | -1 |
| si: | New SI, HC = 13, NC = | 2 | 99 | B14823.195 | STONY | #195 | 20:43:37 | | 1 | -1 |