| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2023 144 15 59 59 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B14423.195 | STONY | #195 | 07:43:37 | | 1 | -1 |
| rl: | 2023 144 15 59 59 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B14423.195 | STONY | #195 | 07:43:39 | | 1 | -1 |
| rl: | 2023 144 16 03 30 MAIN.C : motor initialization timed out. | 1 | 5 | B14423.195 | STONY | #195 | 07:43:44 | | 1 | -1 |
| rl: | 2023 144 16 04 37 Bad command string. Command string buffer cleared. | 1 | 3 | B14423.195 | STONY | #195 | 07:43:47 | | 1 | -1 |
| rl: | 2023 144 16 04 37 Bad command string. Command string buffer cleared. | 1 | 3 | B14423.195 | STONY | #195 | 07:43:47 | | 1 | -1 |
| rl: | 2023 144 16 04 37 <= | 1 | 3 | B14423.195 | STONY | #195 | 07:43:49 | | 1 | -1 |
| rl: | 2023 144 16 28 43 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 4 | 3 | B14423.195 | STONY | #195 | 07:43:52 | | 1 | -1 |
| rl: | 2023 144 16 28 43 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 4 | 3 | B14423.195 | STONY | #195 | 07:43:52 | | 1 | -1 |
| di: | HOME key pressed | 3 | 99 | B14423.195 | STONY | #195 | 10:43:31 | | 1 | -1 |
| pd: | Going to menu | 3 | 99 | B14423.195 | STONY | #195 | 10:44:14 | | 1 | -1 |
| dsp: | Doing dispersion test with Hg (UV port) | 2 | 99 | B14423.195 | STONY | #195 | 13:15:41 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 1 | 1 | 99 | B14423.195 | STONY | #195 | 14:07:03 | | 1 | -1 |
| az: | Azimuth discrepancy = 1763 | 1 | 99 | B14423.195 | STONY | #195 | 16:39:56 | 1763 | -30 | 30 |
| ds: | DS intensity too high ( 234703/cy) quitting. | 4 | 99 | B14423.195 | STONY | #195 | 22:14:26 | | 1 | -1 |
| ds: | Suppressed oscillation of filter wheel. | 2 | 5 | B14423.195 | STONY | #195 | 22:14:44 | | 1 | -1 |