| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2022 356 00 45 55 Reset Tepid -> Tepid from 2022 356 00 45 45 until 2022 356 00 45 50 . Counts: 1,0 | 1 | 3 | B35522.195 | STONY | #195 | 07:41:07 | | 1 | -1 |
| rl: | 2022 356 00 45 56 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B35522.195 | STONY | #195 | 07:41:10 | | 1 | -1 |
| rl: | 2022 356 00 45 59 Reset No -> Warm from 2022 356 00 45 56 until 2022 356 00 45 56 . Counts: 1,1 | 1 | 3 | B35522.195 | STONY | #195 | 07:41:13 | | 1 | -1 |
| rl: | 2022 356 00 46 00 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B35522.195 | STONY | #195 | 07:41:15 | | 1 | -1 |
| rl: | 2022 356 00 47 27 Reset Warm -> Warm from 2022 356 00 47 24 until 2022 356 00 47 25 . Counts: 0,1 | 1 | 3 | B35522.195 | STONY | #195 | 07:41:21 | | 1 | -1 |
| rl: | 2022 356 00 49 15 Bad command string. Command string buffer cleared. | 1 | 3 | B35522.195 | STONY | #195 | 07:41:26 | | 1 | -1 |
| rl: | 2022 356 00 49 15 Bad command string. Command string buffer cleared. | 1 | 3 | B35522.195 | STONY | #195 | 07:41:26 | | 1 | -1 |
| rl: | 2022 356 00 49 15 <a | 1 | 3 | B35522.195 | STONY | #195 | 07:41:28 | | 1 | -1 |
| rl: | 2022 355 01 19 04 New value set for watermark LOOP.RUN.TIME: 700.000000 millisec. | 1 | 3 | B35522.195 | STONY | #195 | 07:41:31 | | 1 | -1 |
| rl: | 2022 355 01 19 04 New value set for watermark LOOP.RUN.TIME: 700.000000 millisec. | 1 | 3 | B35522.195 | STONY | #195 | 07:41:31 | | 1 | -1 |
| ds: | DS intensity too low ( 4/cy), skipping. | 2 | 99 | B35522.195 | STONY | #195 | 23:06:39 | | 1 | -1 |
| zs: | ZS intensity too low ( 274/cy), skipping. | 4 | 99 | B35522.195 | STONY | #195 | 23:06:55 | | 1 | -1 |