| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| zs: | ZS intensity too low ( 213/cy), skipping. | 3 | 99 | B26622.195 | STONY | #195 | 01:29:29 | | 1 | -1 |
| rl: | 1992 001 22 07 28 Reset No -> Tepid from 1992 001 22 07 12 until 1992 001 21 59 41 . Counts: 2,0 | 1 | 3 | B26622.195 | STONY | #195 | 07:40:25 | | 1 | -1 |
| rl: | 1992 001 22 07 29 Motor #1: appears stuck with a reference sensor activated. | 1 | 3 | B26622.195 | STONY | #195 | 07:40:27 | | 1 | -1 |
| rl: | 1992 001 22 07 29 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B26622.195 | STONY | #195 | 07:40:30 | | 1 | -1 |
| rl: | 1992 001 22 50 40 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 2 | 3 | B26622.195 | STONY | #195 | 07:40:35 | | 1 | -1 |
| rl: | 1992 001 22 50 40 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 2 | 3 | B26622.195 | STONY | #195 | 07:40:35 | | 1 | -1 |
| ab_sk: | HOME key pressed | 1 | 99 | B26622.195 | STONY | #195 | 13:54:55 | | 1 | -1 |
| ds: | DS intensity too high ( 215923/cy) quitting. | 1 | 99 | B26622.195 | STONY | #195 | 23:05:24 | | 1 | -1 |