| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2022 120 14 10 05 Reset Tepid -> Tepid from 2022 120 14 09 55 until 2022 120 14 10 00 . Counts: 1,0 | 1 | 3 | B12122.195 | STONY | #195 | 07:47:40 | | 1 | -1 |
| rl: | 2022 120 14 10 06 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B12122.195 | STONY | #195 | 07:47:43 | | 1 | -1 |
| rl: | 2022 120 14 10 06 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B12122.195 | STONY | #195 | 07:47:46 | | 1 | -1 |
| rl: | 2022 120 14 11 51 Bad command string. Command string buffer cleared. | 1 | 3 | B12122.195 | STONY | #195 | 07:47:51 | | 1 | -1 |
| rl: | 2022 120 14 11 51 Bad command string. Command string buffer cleared. | 1 | 3 | B12122.195 | STONY | #195 | 07:47:51 | | 1 | -1 |
| rl: | 2022 120 14 11 51 < | 1 | 3 | B12122.195 | STONY | #195 | 07:47:53 | | 1 | -1 |
| rl: | 2022 121 14 47 12 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 4 | 3 | B12122.195 | STONY | #195 | 07:47:56 | | 1 | -1 |
| rl: | 2022 121 14 47 12 New value set for watermark LOOP.RUN.TIME: 653.999996 millisec. | 4 | 3 | B12122.195 | STONY | #195 | 07:47:56 | | 1 | -1 |
| ds: | DS intensity too high ( 214946/cy) quitting. | 3 | 99 | B12122.195 | STONY | #195 | 17:23:54 | | 1 | -1 |