| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 1992 001 00 06 58 Reset Warm -> Tepid from 2020 212 19 31 43 until 2015 001 00 06 19 . Counts: 1,0 | 1 | 3 | B21220.195 | TORON | #195 | 05:33:07 | | 1 | -1 |
| rl: | 1992 001 00 06 59 Checksum bad in low level command. | 1 | 3 | B21220.195 | TORON | #195 | 05:33:09 | | 1 | -1 |
| rl: | 1992 001 00 06 59 Motor #1: appears stuck with a reference sensor activated. | 1 | 3 | B21220.195 | TORON | #195 | 05:33:11 | | 1 | -1 |
| rl: | 1992 001 00 06 59 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B21220.195 | TORON | #195 | 05:33:14 | | 1 | -1 |
| rl: | 1992 001 00 06 59 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B21220.195 | TORON | #195 | 05:33:16 | | 1 | -1 |
| re: | Illegal command (re) in schedule ecsc, ignoring | 1 | 99 | B21220.195 | TORON | #195 | 05:37:28 | | 1 | -1 |
| ds: | DS intensity too low ( 2/cy), skipping. | 3 | 99 | B21220.195 | TORON | #195 | 10:09:34 | | 1 | -1 |
| zs: | ZS intensity too low ( 143/cy), skipping. | 1 | 99 | B21220.195 | TORON | #195 | 10:09:49 | | 1 | -1 |
| ds: | HOME key pressed | 1 | 99 | B21220.195 | TORON | #195 | 18:40:57 | | 1 | -1 |
| ds: | Going to menu | 1 | 99 | B21220.195 | TORON | #195 | 18:41:57 | | 1 | -1 |
| re: | Azimuth discrepancy = 2136 | 1 | 99 | B21220.195 | TORON | #195 | 19:39:38 | 2136 | -30 | 30 |
| si: | New SI, HC = 5, NC = 690 Old = 8 , 810 | 1 | 99 | B21220.195 | TORON | #195 | 19:59:20 | | 1 | -1 |