| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| rl: | 2019 144 22 36 09 Reset No -> Tepid from 2019 144 22 27 53 until 2077 144 22 36 03 . Counts: 1,0 | 1 | 3 | B14419.195 | STONY | #195 | 07:38:58 | | 1 | -1 |
| rl: | 2019 144 22 36 09 Checksum bad in low level command. | 1 | 3 | B14419.195 | STONY | #195 | 07:39:00 | | 1 | -1 |
| rl: | 2019 144 22 36 09 Motor #1: appears stuck with a reference sensor activated. | 1 | 3 | B14419.195 | STONY | #195 | 07:39:02 | | 1 | -1 |
| rl: | 2019 144 22 36 09 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B14419.195 | STONY | #195 | 07:39:05 | | 1 | -1 |
| rl: | 2019 144 22 36 10 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B14419.195 | STONY | #195 | 07:39:07 | | 1 | -1 |
| rl: | 2019 144 22 36 49 Reset Warm -> Warm from 2019 144 22 36 45 until 2019 144 22 36 46 . Counts: 1,1 | 1 | 3 | B14419.195 | STONY | #195 | 07:39:10 | | 1 | -1 |
| ds: | HOME key pressed | 3 | 99 | B14419.195 | STONY | #195 | 13:13:15 | | 1 | -1 |
| ds: | Going to menu | 3 | 99 | B14419.195 | STONY | #195 | 13:13:17 | | 1 | -1 |
| re: | Azimuth discrepancy = 16000 | 2 | 99 | B14419.195 | STONY | #195 | 13:58:23 | 16000 | -30 | 30 |
| dsp: | Doing dispersion test with Hg (UV port) | 2 | 99 | B14419.195 | STONY | #195 | 20:15:28 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 1 | 1 | 99 | B14419.195 | STONY | #195 | 22:19:09 | | 1 | -1 |