| Type | Comment | count | priority | fname | location | serial | time | value | min | max |
|---|
| re: | Zenith discrepancy = -34 | 1 | 99 | B17126.194 | ALERT | #194 | 00:03:15 | -34 | -10 | 10 |
| rl: | 2026 171 17 55 46 Reset No -> Tepid from 2026 171 17 32 50 until 2072 171 17 55 41 . Counts: 1,0 | 1 | 3 | B17126.194 | ALERT | #194 | 04:16:08 | | 1 | -1 |
| rl: | 2026 171 17 55 47 Checksum bad in low level command. | 1 | 3 | B17126.194 | ALERT | #194 | 04:16:10 | | 1 | -1 |
| rl: | 2026 171 17 55 47 Motor #3: appears stuck with a reference sensor activated. | 1 | 3 | B17126.194 | ALERT | #194 | 04:16:13 | | 1 | -1 |
| rl: | 2026 171 17 55 47 Motor #11: appears stuck with a reference sensor activated. | 1 | 3 | B17126.194 | ALERT | #194 | 04:16:16 | | 1 | -1 |
| rl: | 2026 171 17 56 50 New value set for watermark SUPPLY.VOLTAGE.HIGH | 1 | 3 | B17126.194 | ALERT | #194 | 04:16:19 | | 1 | -1 |
| rl: | 2026 171 18 02 27 Reset Warm -> Warm from 2026 171 18 02 24 until 2026 171 18 02 24 . Counts: 0,1 | 1 | 3 | B17126.194 | ALERT | #194 | 04:16:22 | | 1 | -1 |
| rl: | 2026 171 18 04 36 MAIN.C : motor initialization timed out. | 1 | 5 | B17126.194 | ALERT | #194 | 04:16:25 | | 1 | -1 |
| re: | Azimuth discrepancy = -48 | 2 | 99 | B17126.194 | ALERT | #194 | 04:29:36 | -48 | -30 | 30 |
| dsp: | Doing dispersion test with Cd (UV port) | 3 | 99 | B17126.194 | ALERT | #194 | 18:05:38 | | 1 | -1 |
| checkhg: | Last HG had to adjust the micrometer by at least 2 | 1 | 99 | B17126.194 | ALERT | #194 | 20:24:50 | | 1 | -1 |